Juniper J2300 User Manual page 38

J-series™ Services Router User Guide
In addition to the features described in subsequent sections, the chassis
includes the following features (see Figure 1 and Figure 2):
WARNING: Before removing or installing components of a functioning router, attach
an ESD strap to an ESD point and place the other end of the strap around your bare
wrist. Failure to use an ESD strap could result in damage to the router.
The router is connected to earth ground through the AC power cord. The router
must be connected to earth ground during normal operation.
For additional safety information, see "Safety and Regulatory Compliance
Information" on page 563.
Figure 1: Front of J2300 Chassis
Mounting bracket
Figure 2: Rear of J2300 Chassis
Protective
earthing terminal
8
J2300 Services Router Hardware Features
One pair of metal brackets that can be attached to the side of the chassis. You
can use the brackets for mounting the chassis in a rack or cabinet or on a wall.
One electrostatic discharge (ESD) point, a PEM nut at the rear of the chassis.
Power Console
button port
Primary compact
flash drive
Power
appliance inlet
Physical
LAN ports
USB interface
port module (PIM)
Power supply
fan exhaust
Mounting
bracket