Juniper J2300 User Manual page 416

J-series™ Services Router User Guide
Table 150: Creating a Policy to Accept and Apply Damping on Routes
Task
Navigate to the Term level in the
configuration hierarchy.
Specify the routes to dampen.
Specify the damping parameters
group to apply to the route filter.
Navigate to the Policy options level in
the configuration hierarchy.
386
Configuring a Routing Policy with a Configuration Editor
J-Web Configuration Editor
In the J-Web configuration editor
hierarchy, select Policy options>Policy
statement>Term.
1.
In the From option, click Configure.
2. In the Value box, enter the prefixes
you wish to dampen.
3.
In the Route filter box, click Add
new entry.
4.
In the Value box, enter the prefixes
you wish to dampen.
5.
Click OK.
1.
In the configuration editor hierarchy,
select Policy options>Policy
statement>Term.
2.
In the Then option, click Configure.
3.
In the AS path prepend box,
enter the string of AS numbers to
prepend. Separate each AS number
with a space.
4. Click OK.
In the J-Web configuration editor
hierarchy, select Policy options.
CLI Configuration Editor
From the top of the CLI configuration
hierarchy, enter
edit policy-options policy-statement
dampenpolicy1 term dampenterm1
1.
Dampen routes 172.168.0.0/16 or
longer:
set from route-filter 172.16.0.0/12
orlonger
2.
Dampen routes 192.168.0.0/16 or
longer:
set from route-filter
192.168.0.0/16 orlonger
3. Dampen routes 10.0.0.0/8 or
longer:
set from route-filter 10.0.0.0/8
orlonger
Specify the AS numbers to prepend,
and enclose inside them inside double
quotation marks:
set then as-path-prepend "1 1 1 1"
From the top of the CLI configuration
hierarchy, enter
edit policy-options