Configuring A Stateful Firewall Filter With Quick Configuration - Juniper J2300 User Manual

J-series™ Services Router User Guide
Unlike a stateful firewall filter, you can configure a stateless firewall filter before
configuring the interfaces on which they are applied.

Configuring a Stateful Firewall Filter with Quick Configuration

You can use the Firewall/NAT Quick Configuration pages to configure a
stateful firewall filter and NAT. These Quick Configuration pages allow
you to designate the interfaces that make up the untrusted network. In
addition, you can designate the applications that are allowed to operate
from the untrusted network to the trusted network.
Figure 93 and Figure 94 show the Firewall/NAT Quick Configuration
main and application pages.
Figure 93: Firewall/NAT Quick Configuration Main Page
390
Configuring a Stateful Firewall Filter with Quick Configuration