Juniper J2300 User Manual page 127

Table 31: T3 Quick Configuration Summary
Field
Logical Interfaces
Add logical interfaces
Logical Interface Description
IPv4 Addresses and Prefixes
Physical Interface Description
Encapsulation
Encapsulation
Enable CHAP
CHAP Local Identity (available if CHAP is enabled)
Use System Host Name
Local Name
CHAP Peer Identity
CHAP Secret
Function
Defines one or more logical units
that you connect to this physical T3
interface. You must define at least
one logical unit for a T3 interface.
You can define multiple units if the
encapsulation type is Frame Relay.
(Optional) Describes the logical
interface.
Specifies one or more IPv4 addresses
for the interface.
(Optional) Adds supplementary
information about the physical T3
interface.
Specifies the encapsulation type for
traffic on the interface.
Enables or disables CHAP authentication
on a T3 interface with PPP encapsulation
only.
Specifies that the T3 interface use the
Services Router's system hostname in
CHAP challenge and response packets.
If Use System Host Name is disabled,
specifies the local name for CHAP to
use.
Identifies the client or peer with which
the Services Router communicates on
this T3 interface.
Specifies the secret password for CHAP
authentication, known to both sides of
the connection.
Configuring Network Interfaces with Quick Configuration
Configuring Network Interfaces
Your Action
Click Add.
Type a text description of the logical
interface to more clearly identify it in
monitoring displays.
1.
Type one or more IPv4 addresses
and prefixes in dotted decimal
notation. For example:
10.10.10.10/24
2.
Click Add.
Type a text description of the T3
interface to more clearly identify it in
monitoring displays.
From the drop-down list, select the
encapsulation for this T3 interface:
PPP
Frame Relay
Cisco HDLC
To enable CHAP, select the
check box.
To disable CHAP, clear the check
box.
To enable, select the check box
(the default).
To disable, clear the check box.
Type a local name for this T3 interface.
Type the CHAP client name.
Type a password that is known to the
other side of the connection. Use a
combination of letters and numbers
that is difficult for others to guess.
97