Juniper J2300 User Manual page 469

Task
Configure assured forwarding class
rewrite rules.
J-Web Configuration Editor
1.
Click Add new entry next to
Forwarding class.
2.
In the Class name box, type
the name of the previously
configured assured forwarding
class—af-class.
3.
Click Add new entry next to Loss
priority.
4.
From the Loss val list, select low.
5.
In the Code point box, type the
value of the low-priority code point
for assured forwarding traffic—for
example, 001010.
6.
Click OK.
7. Click Add new entry next to Loss
priority.
8. From the Loss val list, select high.
9.
In the Code point box, type the
value of the high-priority code
point for assured forwarding
traffic—for example, 001100.
10.
Click OK twice.
Configuring CoS with DiffServ with a Configuration Editor
Configuring Class of Service with DiffServ
CLI Configuration Editor
Enter
set forwarding-class af-class
loss-priority low code points 001010
set forwarding-class af-class
loss-priority high code points 001100
439