Juniper J Series Quick Start Manual
Services router
Hide thumbs
Also See for J Series:
- Administration manual (332 pages) ,
- Hardware manual (280 pages) ,
- Quick start manual (16 pages)
Table of Contents
Advertisement
Quick Links
J-series Services Router Quick Start
18 October 2006
Part No.
530-017554-01
Revision 1
J-series Services Routers provide IP routing, WAN and LAN connectivity, and
management services. Available in several models, Services Routers typically
connect small, branch, or regional offices to a central site, and link Internet service
provider (ISP) networks.
Follow these instructions to initially set up a J-series Services Router. You need no
previous JUNOS Internet software experience, but must have managed a network
and configured other routers. For more information, see the J-series documentation
at http://www.juniper.net/techpubs/ .
What You Need to Know ........................................................................................ 2
Before You Begin.................................................................................................... 3
Installing a Services Router..................................................................................... 4
Installing a J2300 Services Router .................................................................... 4
Installing a J4300 or J6300 Services Router...................................................... 5
Installing a J4350 or J6350 Services Router...................................................... 5
Connecting Power to a Services Router .................................................................. 6
Basic Connection and Configuration with the J-Web Interface ................................ 7
1. Connecting, Logging In, and Starting the J-Web Interface ............................ 7
2. Updating the Software with the J-Web Interface........................................... 8
3. Adding Licenses with the J-Web Interface ....................................................8
4. Configuring Basic Settings with J-Web Quick Configuration..........................8
Basic Connection and Configuration with the CLI .................................................10
1. Connecting, Logging In, and Starting the CLI .............................................10
2. Updating the JUNOS Software with the CLI ................................................11
3. Adding Licenses with the CLI .....................................................................11
4. Configuring Basic Settings with the CLI ......................................................12
J-Web Basics .........................................................................................................13
JUNOS CLI Basics..................................................................................................14
Safety Warnings Summary ...................................................................................16
Compliance Statements........................................................................................18
Product Reclamation and Recycling Program .......................................................22
Requesting Product Support .................................................................................23
530-017554-01
!
1
Advertisement
Table of Contents
Related Manuals for Juniper J Series
Summary of Contents for Juniper J Series
-
Page 1: Table Of Contents
Follow these instructions to initially set up a J-series Services Router. You need no previous JUNOS Internet software experience, but must have managed a network and configured other routers. For more information, see the J-series documentation at http://www.juniper.net/techpubs/ . What You Need to Know ..................2 Before You Begin....................3 Installing a Services Router.................. -
Page 2: What You Need To Know
J-series Services Router Quick Start What You Need to Know When you first connect a management PC or laptop to a built-in Ethernet port on a Management IP Services Router, the router acts as a DHCP client and attempts to perform an Address autoinstallation. -
Page 3: Before You Begin
J-series Services Router Quick Start On J4350 and J6350 routers, the built-in Gigabit Ethernet LAN ports 0/0 through 0/3 , which are in slot 0, are named ge-0/0/0 , ge-0/0/1 , ge-0/0/2 , and ge-0/0/3 On models with replaceable PIMs, the first port on a T1 PIM in slot 1 is named t1-1/0/0 Although Telnet and SSH are both supported, they are disabled by default. -
Page 4: Installing A Services Router
J-series Services Router Quick Start If you are installing a J4350 or J6350 Services Router, take the following steps: 1. Attach the air filter and filter cover, as shown in Figure 1. Figure 1: Attaching Air Filter and Filter Cover Air filter Filter cover Cover latches... -
Page 5: Installing A J4300 Or J6300 Services Router
J-series Services Router Quick Start To install a J2300 Services Router on a wall, attach the rubber feet to the chassis underside, attach a mounting bracket to each side of the chassis, and attach the brackets to the wall. (For instructions, see the J2300, J4300, and J6300 Services Router Getting Started Guide.) Installing a J4300 or J6300 Services Router To install a J4300 or J6300 Services Router in a rack:... -
Page 6: Connecting Power To A Services Router
J-series Services Router Quick Start Connecting Power to a Services Router J2300, J4300, and J4350 Services Routers have a fixed power supply. J6300 and J6350 Services Routers have one or two field-replaceable power supplies. To connect AC or DC power: 1. -
Page 7: Basic Connection And Configuration With The J-Web Interface
J-series Services Router Quick Start Basic Connection and Configuration with the J-Web Interface For J-Web access, you connect from your management PC or laptop to the Services Router through one of the built-in Ethernet interfaces. The examples in this document use port 0. (For information about the J-Web interface, see “J-Web Basics”... -
Page 8: Updating The Software With The J-Web Interface
2. Updating the Software with the J-Web Interface After starting up the Services Router, you might want to download the latest version of the JUNOS software from the Juniper Networks Web site and load it onto the router. To update the JUNOS software: 1. - Page 9 J-series Services Router Quick Start 2. Enter information in the boxes on the Set Up Quick Configuration page as shown in Table 2, then click OK or Apply. Table 2: J-Web Set Up Quick Configuration Field Description Host Name (required) Hostname of the router—for example, Chicago Domain Name...
-
Page 10: Basic Connection And Configuration With The Cli
J-series Services Router Quick Start 4. To enable routing protocols, under Quick Configuration click Routing. To add static routes, click Static Routing. To enable a routing protocol, click the protocol. When you are finished with a page, click OK or Apply. For complete instructions, see the J-series Services Router Basic LAN and WAN Access Configuration Guide. -
Page 11: Updating The Junos Software With The Cli
After starting up the Services Router, you might want to download the latest version of the JUNOS software from the Juniper Networks Web site and load it onto the router. You can use the CLI, but we recommend the J-Web interface for the download. -
Page 12: Configuring Basic Settings With The Cli
J-series Services Router Quick Start 4. Configuring Basic Settings with the CLI In CLI configuration mode, you use the set command to enable features, and the command to disable them. The commands you enter do not update the delete active configuration on the router until you use the commit command. To configure basic settings with the CLI: 1. -
Page 13: J-Web Basics
J-series Services Router Quick Start J-Web Basics The task bar at the top of the J-Web interface identifies the main J-Web functions. You access specific tasks on the left. Monitor—Output from common show commands Configuration—Quick Configuration wizards and a graphical version of the CLI Diagnose—Ping, traceroute, and packet capture Manage—Configuration file management and licenses Events—System log messages... -
Page 14: Junos Cli Basics
J-series Services Router Quick Start JUNOS CLI Basics After you start the CLI with the cli command, type a question mark (?) to display a list of the available commands: root> ? Possible completions: clear Clear information in the system configure Manipulate software configuration information file... - Page 15 J-series Services Router Quick Start Type the following partial command to display the JUNOS software version running on the router: root> sh ver Hostname: host Model: j2300 JUNOS Software Release [8.0-20060607.0] (Export edition) To access configuration mode, enter the configure command. The prompt changes to a pound sign (#).
-
Page 16: Safety Warnings Summary
NOTE: This is a summary of safety warnings. For a complete list of warnings, including translations, see the Getting Started Guide for your router at http://www.juniper.net/techpubs/ Permit only trained and qualified personnel to install or replace Services Router components. Perform only the procedures described in this quick start and the Getting Started Guide for your router. - Page 17 J-series Services Router Quick Start AC power cable warning (Japan): The attached power cable is only for this product. Do not use the cable WARNING: for another product. Safety Warnings Summary...
-
Page 18: Compliance Statements
J-series Services Router Quick Start Compliance Statements Declaration of Conformity Juniper Networks, Inc. 1194 N. Mathilda Ave Sunnyvale, CA. 94089 USA declares that under our sole responsibility the product(s) Internet Router Model J4350/J6350 are in conformity with the provisions of the following EC Directives, including all amendments,... - Page 19 J-series Services Router Quick Start DOC 0014 Declaration of Conformity Juniper Networks, Inc. 1194 N. Mathilda Ave Sunnyvale, CA. 94089 USA declares that under our sole responsibility the product(s) J2300 Sevices Router are in conformity with the provisions of the following EC Directives, including all amendments,...
- Page 20 J-series Services Router Quick Start DOC 0015 Declaration of Conformity Juniper Networks, Inc. 1194 N. Mathilda Ave Sunnyvale, CA. 94089 USA declares that under our sole responsibility the product(s) J4300 Sevices Router are in conformity with the provisions of the following EC Directives, including all amendments,...
- Page 21 J-series Services Router Quick Start DOC 0016 Declaration of Conformity Juniper Networks, Inc. 1194 N. Mathilda Ave Sunnyvale, CA. 94089 USA declares that under our sole responsibility the product(s) J6300 Sevices Router are in conformity with the provisions of the following EC Directives, including all amendments,...
-
Page 22: Product Reclamation And Recycling Program
J-series Services Router Quick Start Product Reclamation and Recycling Program Juniper Networks is committed to environmentally responsible behavior. As part of this commitment, we continually work to comply with environmental standards such as the European Union’s Waste Electrical and Electronic Equipment (WEEE) Directive and Restriction of Hazardous Substances (RoHS) Directive. -
Page 23: Requesting Product Support
Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785. - Page 24 J-series Services Router Quick Start Requesting Product Support...