Adding A Tacacs+ Server For Authentication - Juniper J2300 User Manual

Table 53: Users Quick Configuration for RADIUS Servers Summary
Field
RADIUS Server
RADIUS Server Address (required)
RADIUS Server Secret (required)
Verify RADIUS Server Secret (required)

Adding a TACACS+ Server for Authentication

You can use the Users Quick Configuration page for TACACS+ servers to configure
a TACACS+ server for system authentication. This Quick Configuration page
allows you to specify the IP address and secret of the TACACS+ server.
Figure 45 shows the Users Quick Configuration page for TACACS+ servers.
Function
Identifies the IP address of the RADIUS
server.
The secret (password) of the RADIUS
server.
Verifies the secret (password) of the
RADIUS server is entered correctly.
Managing Users and Files with the J-Web Interface
Managing Users and Operations
Your Action
Type the RADIUS server's 32-bit IP
address, in dotted decimal notation.
Type the secret (password) of the
RADIUS server. Secrets can contain
spaces. The secret used must match
that used by the RADIUS server.
Retype the secret of the RADIUS server.
171