Juniper J2300 User Manual page 28

J-series™ Services Router User Guide
Convention
Italic sans serif typeface
Sans serif typeface
< > (angle brackets)
| (pipe symbol)
# (pound sign)
[ ] (square brackets)
Indention and braces ( { } )
; (semicolon)
J-Web GUI Conventions
Bold typeface
> (bold right angle bracket)
Related Juniper Networks Documentation
Although this guide provides instructions for configuring and managing a J-series
Services Router with the JUNOS CLI, it is not a comprehensive JUNOS software
resource. For complete documentation of the statements and commands described
in this guide, see the JUNOS software manuals listed in Table 5.
xxviii
Related Juniper Networks Documentation
Description
Represents variables (options for which
you substitute a value) in commands or
configuration statements.
Represents names of configuration
statements, commands, files, and
directories; IP addresses; configuration
hierarchy levels; or labels on routing
platform components.
Enclose optional keywords or variables.
Indicates a choice between the mutually
exclusive keywords or variables on
either side of the symbol. The set of
choices is often enclosed in parentheses
for clarity.
Indicates a comment specified on
the same line as the configuration
statement to which it applies.
Enclose a variable for which you can
substitute one or more values.
Identify a level in the configuration
hierarchy.
Identifies a leaf statement at a
configuration hierarchy level.
Represents J-Web graphical user
interface (GUI) items you click or select.
Separates levels in a hierarchy of J-Web
selections.
Examples
Configure the machine's domain name:
[edit]
root@# set system domain-name
domain-name
To configure a stub area, include
the stub statement at the [edit
protocols ospf area area-id]
hierarchy level.
The console port is labeled
CONSOLE.
stub <default-metric metric >;
broadcast | multicast
( string1 | string2 | string3 )
rsvp { # Required for dynamic MPLS
only
community name members [
community-ids ]
[edit]
routing-options {
static {
route default {
nexthop address ;
retain;
}
}
}
In the Logical Interfaces box,
select All Interfaces.
To cancel the configuration,
click Cancel.
In the configuration editor hierarchy,
select Protocols>Ospf.