Verifying Basic Connectivity; Displaying Basic Connectivity Configurations - Juniper J2300 User Manual

2.
3.

Verifying Basic Connectivity

To verify that the Services Router has the settings you configured,
perform the following task.

Displaying Basic Connectivity Configurations

Verify the configuration of basic connectivity. Because the basic connectivity
Purpose
settings appear in different places in the configuration hierarchy, displaying the
entire configuration at once makes viewing the settings easier.
From the J-Web interface, select
Action
Configuration>View and Edit>View Configuration Text.
Alternatively, from configuration mode in the CLI, enter the
following sample output displays the sample values configured in Table 22. Your
output displays the values you set.
Sample Output
system {
Specify the URL or FTP site of the configuration file that you want to
automatically install on the Services Router:
user@host# set configuration-servers url
If the destination URL is not specified, but DHCP is configured correctly,
autoinstallation still works properly.
Specify the interface that the Services Router will use to send out and receive
requests, and specify the IP address procurement protocol—
Typically, the interface is
network that provides access to a DHCP server for IP address resolution.
For example, the following command configures the
autoinstallation by means of BOOTP:
user@host# set interfaces fe-0/0/0 bootp
host-name routera;
domain-name lab.router.net;
domain-search [ lab.router.net router.net ];
backup-router 192.168.2.44;
time-zone America/Los_Angeles;
root-authentication {
ssh-rsa "ssh-rsa AAAAB3Nza...D9Y2gXF9ac==root@routera.lab.router.net";
}
name-server {
10.148.2.32;
}
services {
. This interface needs to be connected to a
fe-0/0/0
Verifying Basic Connectivity
Establishing Basic Connectivity
, , or .
bootp rarp slarp
interface for
fe-0/0/0
command. The
show
67