Juniper J2300 User Manual page 432

J-series™ Services Router User Guide
Task
Define protect-RE and
ssh-term, and define the
protocol, destination port,
and source address match
conditions.
Define the actions for
ssh-term.
402
Configuring a Stateless Firewall Filter with a Configuration Editor
J-Web Configuration Editor
1.
Next to Filter, click Add new entry.
2. In the Filter name box, type protect-RE.
3.
Next to Term, click Add New Entry.
4. In the Rule name box, type ssh-term.
5.
Next to From, click Configure.
6.
In the Protocol choice drop-down list,
select Protocol.
7.
Next to Protocol, click Add new entry.
8. In the Value keyword drop-down list,
select tcp.
9. Click OK.
10.
In the Destination port choice drop-down
list, select Destination port.
11.
Next to Destination port, click Add new
entry.
12.
In the Value keyword drop-down list,
select ssh.
13.
Click OK.
14.
Next to Source address, click Add new
entry.
15.
In the Address box, type
192.168.122.0/24.
16.
Click OK twice.
1.
On the Term ssh-term page, next to Then,
click Configure.
2.
In the Designation drop-down list, select
Accept.
3.
Click OK twice.
CLI Configuration Editor
Set the term name and define the match
conditions:
set family inet filter protect-RE term ssh-term
from protocol tcp destination-port ssh
source-address 192.168.122.0/24
Set the actions:
set family inet filter protect-RE term ssh-term
then accept