Figure 96: Quick Configuration Page for IPSec Tunnels
To configure an IPSec tunnel with Quick Configuration:
1.
2.
3.
In the J-Web user interface, select Configuration>IPSec Tunnels.
Enter information into the Quick Configuration page for IPSec Tunnels,
as described in Table 187.
From the IPSec Tunnels Quick Configuration page, click one of the following
buttons:
To apply the configuration and return to the Quick Configuration IPSec
Tunnels page, click OK.
To cancel your entries and return to the Quick Configuration for IPSec
Tunnels page, click Cancel.
Configuring an IPSec Tunnel with Quick Configuration
Configuring IPSec for Secure Packet Exchange
485