Page 1 J2300, J4300, and J6300 Services Router Getting Started Guide Release 8.1 Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 408-745-2000 www.juniper.net Part Number: 530-016823-01, Revision 1...
Page 2 Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
Page 3 (g) distribute any key for the Software provided by Juniper to any third party; (h) use the Software in any manner that extends or is broader than the uses purchased by Customer from Juniper or an authorized Juniper reseller;...
Page 4 (or services are accessed by) the Software shall be a third party beneficiary with respect to this Agreement, and such licensor or vendor shall have the right to enforce this Agreement in its own name as if it were Juniper. In addition, certain third party software may be provided with the Software and is subject to the accompanying license(s), if any, of its respective owner(s).
Page 5: Table Of Contents
Abbreviated Table of Contents About This Guide Part 1 J-series Overview Chapter 1 Overview of J2300, J4300, and J6300 Services Routers Chapter 2 System Overview Physical Interface Modules Overview Chapter 3 Chapter 4 Services Router User Interface Overview Part 2...
Page 6 J2300, J4300, and J6300 Services Router Getting Started Guide Part 4 J-series Requirements and Specifications Chapter 13 Network Cable Specifications and Connector Pinouts Chapter 14 Safety and Regulatory Compliance Information. . Part 5 Index Abbreviated Table of Contents...
Page 7 Related Juniper Networks Documentation........
Page 8 Juniper Networks Logo LED ........
Page 9 Installing the J2300 Services Router on a Desk......97 Installing the J2300 Services Router on a Wall ......98 Installing the J2300 Services Router into a Rack .
Page 10 J2300, J4300, and J6300 Services Router Getting Started Guide Connecting Power ..............102 Connecting AC Power.
Page 11 Table of Contents Before You Begin..............147 Configuring Autoinstallation with a Configuration Editor.
Page 12 Chassis Alarm Conditions ........... .188 Contacting the Juniper Networks Technical Assistance Center ... .190...
Page 13 Table of Contents Definition of Safety Warning Levels ..........217 Safety Guidelines and Warnings .
Page 14: Part 5 Index
J2300, J4300, and J6300 Services Router Getting Started Guide Part 5 Index Index................267...
Page 15: About This Guide
About This Guide This preface provides the following guidelines for using the J2300, J4300, and J6300 Services Router Getting Started Guide: Objectives on page xv Audience on page xvi Document Conventions on page xvi Related Juniper Networks Documentation on page xviii...
Page 16 J-series Services Router guides provide complete instructions for using the J-Web interface, but they are not a comprehensive resource for using the JUNOS CLI. For CLI information, see the JUNOS software manuals listed in “Related Juniper Networks Documentation” on page xviii.
Page 17 About This Guide Table 3: Text and Syntax Conventions Convention Description Examples Represents text that you type. To enter configuration mode, type the Bold sans serif typeface configure command: user@host> configure Fixed-width typeface Represents output that appears on the user@host> show chassis alarms terminal screen.
Page 18 J2300, J4300, and J6300 Services Router Getting Started Guide Convention Description Examples Bold typeface Represents J-Web graphical user In the Logical Interfaces box, interface (GUI) items you click or select. select All Interfaces. To cancel the configuration, click Cancel. > (bold right angle bracket)
Page 19 JUNOS System Basics and Services Command Reference JUNOS Routing Protocols and Policies Command Reference “Class-of-Service Overview” JUNOS Class of Service Configuration Guide JUNOS System Basics and Services Command Reference “Configuring Class of Service” J-series Services Router Administration Guide Related Juniper Networks Documentation...
Page 20 J2300, J4300, and J6300 Services Router Getting Started Guide Chapter in a J-series Guide Corresponding JUNOS Software Manual “Managing User Authentication and Access” JUNOS System Basics Configuration Guide Secure Configuration Guide for Common Criteria and JUNOS-FIPS “Configuring SNMP for Network Management”...
Page 21 About This Guide Requesting Support For technical support, open a support case with the Case Manager link at or call 1-888-314-JTAC (from the United States, http://www.juniper.net/support/ Canada, or Mexico) or 1-408-745-9500 (from elsewhere). Requesting Support...
Page 22 J2300, J4300, and J6300 Services Router Getting Started Guide xxii Requesting Support...
Page 23: J-Series Overview
Part 1 J-series Overview Overview of J2300, J4300, and J6300 Services Routers on page 3 System Overview on page 9 Physical Interface Modules Overview on page 37 Services Router User Interface Overview on page 63 J-series Overview...
Page 24: Part 1 J-Series Overview
J-series Overview...
Page 25: Chapter 1 Overview Of J2300, J4300, And J6300 Services Routers
Quick Configuration wizards to simplify operations and minimize the risk of operator error. JUNOS command–line interface—The JUNOS CLI is a Juniper Networks command shell that runs on top of a UNIX-based operating system kernel. The CLI is a straightforward command interface. You type commands on a single line, and the commands are executed when you press the Enter key.
Page 26: J2300 Services Router Overview
The J2300 Services Router is primarily designed for remote or branch offices. The J2300 Services Router features a smaller chassis (1 U) with a nonredundant AC or DC power supply, 256 MB to 1 GB of memory, a Universal Serial Bus (USB) port for external storage, and installation options for desktop installation, wall mounting, or rack mounting.
Page 27: J6300 Services Router Overview
Overview of J2300, J4300, and J6300 Services Routers Dual-Port Serial PIM Dual-Port T1 PIM J6300 Services Router Overview The J6300 Services Router is designed primarily for large branches or regional offices. The J6300 Services Router has a larger chassis (2 U) with an optional redundant AC or DC power supply, 256 MB to 1 GB of memory, and a Universal Serial Bus (USB) port for external storage.
Page 28 J2300, J4300, and J6300 Services Router Getting Started Guide Table 5: Summary of J-series Features and License Requirements (continued) Feature Category J-series Feature Separate License Routing and Open Shortest Path First (OSPF) Multicast Border Gateway Protocol (BGP) License required for...
Page 29 Overview of J2300, J4300, and J6300 Services Routers Table 5: Summary of J-series Features and License Requirements (continued) Feature Category J-series Feature Separate License Encapsulation Ethernet: Media access control (MAC) encapsulation 802.1p tagging Point-to-Point Protocol over Ethernet (PPPoE) Asynchronous Transfer Mode (ATM) for asymmetric digital subscriber...
Page 30 J2300, J4300, and J6300 Services Router Getting Started Guide Table 5: Summary of J-series Features and License Requirements (continued) Feature Category J-series Feature Separate License High Availability Virtual Router Redundancy Protocol (VRRP) Graceful restart according to IETF standards Redundant interfaces...
Page 31: System Overview
J2300 Cooling System on page 19 J2300 Chassis The J2300 Services Router chassis is a rigid sheet metal structure that houses all the other router components (see Figure 1, Figure 2, and Figure 4). The chassis can be installed in many types of racks or cabinets, on a wall, or on a desk. For information about acceptable rack types, see “Rack Requirements”...
Page 32 J2300, J4300, and J6300 Services Router Getting Started Guide In addition to the features described in subsequent sections, the chassis includes the following features (see Figure 1 through Figure 3): One pair of metal brackets that can be attached to the side of the chassis. You can use the brackets for mounting the chassis in a rack or cabinet or on a wall.
Page 33 System Overview Figure 2: Rear of J2300 AC-Powered Chassis Protective earthing terminal Primary compact flash drive Power Power supply appliance inlet fan exhaust Figure 3: Rear of J2300 DC-Powered Chassis Protective earthing terminal Primary compact flash drive DC power Power supply...
Page 34: J2300 Routing Engine
J2300, J4300, and J6300 Services Router Getting Started Guide Figure 4: J2300 Hardware Components Front Processor Physical Interface Module Power supply (PIM) DRAM Rear Primary compact Routing Engine flash drive Table 6 summarizes the physical specifications for the router chassis.
Page 35: System Overview
“Removing and Installing the Primary Compact Flash Disk” on page 169. J2300 Boot Devices The J2300 Services Router can boot from two devices: Primary compact flash disk USB storage device Normally, the Services Router boots from the primary compact flash disk. If the compact flash disk fails, the router attempts to boot from the removable USB storage device, if present, which is the alternate boot device.
Page 36: Juniper Networks Logo Led
J2300 USB Port on page 17 Juniper Networks Logo LED The Juniper Networks logo LED is located on the top-left corner on the front panel (see Figure 5). Table 7 describes the blue Juniper Networks logo LED. J2300 Services Router Hardware Features...
Page 37: Alarm Led
System Overview Table 7: Juniper Networks Logo LED Color State Description Blue Router is unplugged, powered off, or malfunctioning. On steadily Router is functioning normally. Blinking Router is booting and not yet forwarding traffic. Router is operating but unable to forward traffic because of a problem.
Page 38: Config Button
J2300, J4300, and J6300 Services Router Getting Started Guide Table 8: POWER LED Color State Description Green Router is unplugged, or is powered off and in standby mode. On steadily Router is powered on and is either booting or functioning normally.
Page 39: Console Port
CompactFlash Association. When the USB storage device is installed and configured, it automatically acts as a secondary boot device, if the primary compact flash disk fails on startup. Depending on the size of the USB J2300 Services Router Hardware Features...
Page 40: J2300 Physical Interface Module (Pim)
J2300 Physical Interface Module (PIM) The PIMs in J2300 Services Routers are fixed and not interchangeable, with different chassis types providing different PIMs. The PIMs provide the physical connection to various network media types. J2300 Services Routers are available with different types of chassis.
Page 41: J2300 Power System
Online without traffic. J2300 Power System The J2300 Services Router uses either AC or DC power. The autosensing power supply (see Figure 2 or Figure 3) distributes the different output voltages to the router components according to their voltage requirements.
Page 42: J4300 And J6300 Services Router Hardware Features
J2300, J4300, and J6300 Services Router Getting Started Guide Figure 6: Airflow Through the J2300 Chassis Front Rear The Routing Engine monitors the temperature of the router components. If the ambient maximum temperature specification is exceeded and the router cannot be adequately cooled, the Routing Engine shuts down the hardware components.
Page 43: J4300 And J6300 Chassis
System Overview J4300 and J6300 Cooling System on page 32 J4300 and J6300 Chassis The J4300 and J6300 Services Router chassis is a rigid sheet metal structure that houses all the other router components (see Figure 7 through Figure 12). The chassis can be installed in many types of racks or cabinets.
Page 44 J2300, J4300, and J6300 Services Router Getting Started Guide Figure 7: Front of J4300 and J6300 Chassis Physical Interface Blank Mounting Module (PIM) PIM panel bracket Mounting bracket ST AT US PO RT ST AT US PO RT AL AR M...
Page 45 System Overview Figure 9: Rear of DC-Powered J4300 Chassis Protective earthing terminal Primary compact flash drive DC power Power supply terminal block fan exhaust Terminal block cover Figure 10: Rear of AC-Powered J6300 Chassis Power supply ejector tabs Protective earthing terminal Primary compact Power supply flash drive...
Page 46 J2300, J4300, and J6300 Services Router Getting Started Guide Figure 11: Rear of DC-Powered J6300 Chassis Power supply Terminal DC power ejector tabs terminal block block cover Protective earthing terminal Primary compact flash drive Power supply fan exhaust J4300 and J6300 Services Router Hardware Features...
Page 47 System Overview Figure 12: J4300 and J6300 Hardware Components Rear Primary compact Processor flash drive DRAM Power supply Routing Engine Midplane Removable Physical compact Interface flash drive Module (PIM) Front Table 11 summarizes the physical specifications for the router chassis. J4300 and J6300 Services Router Hardware Features...
Page 48: Midplane
J2300, J4300, and J6300 Services Router Getting Started Guide Table 11: J4300 and J6300 Physical Specifications Description Value Chassis dimensions 3.50 in. (8.9 cm) high 17.00 in. (43.2 cm) wide—19 in. (48.3 cm) wide with mounting brackets attached 19.00 in. (48.3 cm) deep—plus 0.5 in. (1.27 cm) of hardware that protrudes from the...
Page 49: J4300 And J6300 Boot Devices
System Overview EPROM—Stores the serial number of the Routing Engine. To view the serial number of the Routing Engine, issue either the show chassis command or the command. routing-engine show chassis hardware Compact flash drive—Provides primary storage for software images, configuration files, and microcode.
Page 50: Juniper Networks Logo Led
J4300 and J6300 Removable Compact Flash Drive on page 30 Juniper Networks Logo LED The Juniper Networks logo LED on J4300 and J6300 Services Routers functions identically to the Juniper Networks logo LED on the J2300 Services Router. See “Juniper Networks Logo LED” on page 14. ALARM LED...
Page 51: Power Button And Power Led
CONFIG Button button and LED on J4300 and J6300 Services Routers function CONFIG identically to the button and configuration LED on the J2300 Services CONFIG Router. See “CONFIG Button” on page 16. Console Port You can use the console port to connect to the Routing Engine through an RJ-45 serial cable.
Page 52: J4300 And J6300 Removable Compact Flash Drive
J2300, J4300, and J6300 Services Router Getting Started Guide network processor that forwards incoming data packets to the Routing Engine, and receives outgoing data packets from the Routing Engine. The LAN ports are located on the front panel of the router (see Figure 13) and are configured like the ports on a Physical Interface Module (PIM).
Page 53: J4300 And J6300 Physical Interface Modules (Pims)
System Overview J4300 and J6300 Physical Interface Modules (PIMs) Physical Interface Modules (PIMs) provide the physical connection to various network media types. For more information, see “Field-Replaceable PIMs” on page 49. For pinouts of PIM cable connectors, see “Network Cable Specifications and Connector Pinouts”...
Page 54: J4300 And J6300 Cooling System
J2300, J4300, and J6300 Services Router Getting Started Guide Table 13: J6300 Power Supply LED (continued) State Description Green Power supply is working correctly. Power supply is starting up, or has failed. For information about site power preparations, see “Power Guidelines, Requirements, and Specifications”...
Page 55: Software Overview
System Overview Figure 14: Airflow Through the J4300 and J6300 Chassis Rear Front The Routing Engine monitors the temperature of the router components. If the ambient maximum temperature specification is exceeded and the router cannot be adequately cooled, the Routing Engine shuts down the hardware components. Software Overview Each J-series Services Router runs the JUNOS Internet software on its general-purpose processors.
Page 56: Routing Engine And Packet Forwarding Engine
For information about Routing Engine hardware, see “J2300 Routing Engine” on page 12 or “J4300 and J6300 Routing Engine” on page 26. Kernel and Microkernel...
Page 57: User Interfaces
System Overview Table 14: JUNOS Software Processes Process Name Description Management Manages the Services Router system as follows: process Provides communication between the other processes and an interface to the configuration database Populates the configuration database with configuration information and retrieves the information when queried by other processes to ensure that the system operates as configured Interacts with the other processes when commands are issued through one...
Page 58 J2300, J4300, and J6300 Services Router Getting Started Guide configure the router. The J-Web interface also provides tools for monitoring, managing, and diagnosing router operation. Command-line interface (CLI)—Grants access to the complete JUNOS command and configuration hierarchies, to monitor the router, diagnose problems, and configure it completely.
Page 59: Chapter 3 Physical Interface Modules Overview
This chapter contains the following topics. PIM Terms on page 37 J2300 Chassis with Fixed PIMs on page 39 Field-Replaceable PIMs on page 49 PIM Terms To understand the PIMs, become familiar with the terms defined in Table 15.
Page 60 J2300, J4300, and J6300 Services Router Getting Started Guide Table 15: PIM Terms Term Definition ADSL 2/2+ Annex A ITU-T Standard G.992.1 that defines how ADSL works over plain old telephone service (POTS) lines. ADSL 2/2+ Annex B ITU-T Standard G.992.1 that defines how ADSL works over Integrated Services Digital Network (ISDN) lines.
Page 61: J2300 Chassis With Fixed Pims
(PSTN). J2300 Chassis with Fixed PIMs The PIMs in J2300 Services Routers are fixed and not interchangeable. All J2300 chassis types have two Fast Ethernet LAN ports and one set of WAN ports. The...
Page 62: J2300 Chassis Pim Summary
J2300, J4300, and J6300 Services Router Getting Started Guide Dual-Port G.SHDSL Chassis on page 46 Dual-Port G.SHDSL with ISDN BRI S/T Chassis on page 47 J2300 Chassis PIM Summary Table 16 provides software release information, port numbers, and sample interface names for J2300 Services Router chassis types.
Page 63: Dual-Port Serial Chassis
Physical Interface Modules Overview Dual-Port Serial Chassis The J2300 Dual-Port Serial chassis has two Fast Ethernet LAN ports and two serial WAN ports as shown in Figure 15. Figure 15: J2300 Serial Chassis J2300 SYNC ALARM POWER ON SERIAL STATUS...
Page 64: Dual-Port Serial With Isdn Bri Chassis
Offline. Dual-Port Serial with ISDN BRI Chassis The J2300 Dual-Port Serial with ISDN BRI chassis has two Fast Ethernet LAN ports, two serial WAN ports, and one ISDN BRI U (Figure 16) or S/T (Figure 17) port. The ISDN BRI interface is the backup interface to the primary serial interface and provides failover support for a serial connection.
Page 65: Dual-Port T1 Or E1 Chassis
PIM is offline. Dual-Port T1 or E1 Chassis The J2300 Dual-Port T1 or E1 chassis has two Fast Ethernet LAN ports and two T1 or E1 WAN ports. Figure 18 shows the E1 chassis, and Figure 19 shows the T1 chassis.
Page 66: Dual-Port T1 Or E1 With Isdn Bri Chassis
Offline. Dual-Port T1 or E1 with ISDN BRI Chassis The J2300 Dual-Port T1 or E1 with ISDN BRI chassis has two Fast Ethernet LAN ports, two T1 or E1 WAN ports, and one ISDN BRI port. The ISDN BRI interface is the backup interface to the primary T1 or E1 interface and provides ISDN failover support for a T1 or E1 connection.
Page 67 Physical Interface Modules Overview Figure 20: J2300 E1 with ISDN BRI S/T Chassis PORT 4 STATUS J2300 ALARM POWER ON STATUS CONFIG CONSOLE PORT 0 PORT 1 PORT 2 PORT 3 STATUS Figure 21: J2300 T1 with ISDN BRI U Chassis...
Page 68: Dual-Port G.shdsl Chassis
Unlit PIM is offline. Dual-Port G.SHDSL Chassis The J2300 Dual-Port G.SHDSL chassis has two Fast Ethernet LAN ports and two G.SHDSL WAN ports, as shown in Figure 22. The G.SHDSL ports provide symmetric high-speed digital subscriber line (SHDSL) interfaces to ATM network media for ATM-over-SHDSL connections.
Page 69: Dual-Port G.shdsl With Isdn Bri S/T Chassis
Dual-Port G.SHDSL with ISDN BRI S/T Chassis The J2300 Dual-Port G.SHDSL with ISDN BRI chassis has two Fast Ethernet LAN ports, two G.SHDSL WAN ports, and one ISDN BRI S/T port as shown in Figure 23. The G.SHDSL ports provide symmetric high-speed digital subscriber line (SHDSL) interfaces to ATM network media for ATM-over-SHDSL connections.
Page 70 J2300, J4300, and J6300 Services Router Getting Started Guide Figure 23: J2300 G.SHDSL with ISDN BRI S/T Chassis PORT 4 STATUS J2300 ALARM POWER ON STATUS CONFIG CONSOLE PORT 0 PORT 1 PORT 2 PORT 3 STATUS The G.SHDSL with ISDN BRI S/T chassis provides the following key features:...
Page 71: Field-Replaceable Pims
Physical Interface Modules Overview Table 25: Status LEDs for G.SHDSL Ports Color State Description Green On steadily Online with no alarms or failures. On steadily Active with a local alarm. The router has detected a failure. Table 26: Status LED for ISDN BRI Port Color State Description...
Page 72: Field-Replaceable Pim Summary
J2300, J4300, and J6300 Services Router Getting Started Guide Field-Replaceable PIM Summary Table 27 provides software release information, slot and port numbers, and sample interface names for the field-replaceable PIMs supported on J4300 and J6300 Services Routers. Table 27: Field-Replaceable PIM Summary...
Page 73: Dual-Port Serial Pim
Physical Interface Modules Overview Dual-Port Serial PIM The Dual-Port Serial PIM (Figure 24) provides a physical connection to serial network media types through two serial interface ports. Figure 24: Dual-Port Serial PIM The Dual-Port Serial PIM provides the following key features: Onboard network processor Autoselection of operation modes based on data terminal equipment (DTE) or data communication equipment (DCE) cables...
Page 74: Dual-Port T1 Or E1 Pim
J2300, J4300, and J6300 Services Router Getting Started Guide Table 28: Status LEDs for Serial Ports (continued) Color State Description On steadily Active with a local alarm. The router has detected a failure. Unlit Offline. Dual-Port T1 or E1 PIM The Dual-Port T1 PIM (Figure 25) and Dual-Port E1 PIM (Figure 26) provide a physical connection to T1 or E1 network media types.
Page 75: Dual-Port Channelized T1 Or E1 Pim
Physical Interface Modules Overview G.703, G.704, and G.706 E1 standards compliance Independent internal and external clocking system Loopback, bit error rate test (BERT), T1 facilities data link (FDL), and long buildout diagnostics For pinouts of cable connectors for T1 and E1 PIMs, see “E1 and T1 RJ-48 Cable Pinouts”...
Page 76 J2300, J4300, and J6300 Services Router Getting Started Guide Figure 27: Channelized T1/E1 PIM The Dual-Port Channelized T1 or E1 PIM provides the following key features: Onboard network processor Two-port channelization Interfaces that are software configurable as T1 or E1...
Page 77: T3 Or E3 Pim
Physical Interface Modules Overview Channelized T1 and E1 LEDs indicate PIM and port status. Table 30 describes the meaning of the LED states. Table 30: LEDs for Channelized T1 and E1 PIMs Label Color State Description ONLINE Green On steadily PIM is online and operational.
Page 78 J2300, J4300, and J6300 Services Router Getting Started Guide Figure 29: E3 PIM The T3 and E3 PIMs provide the following key features: Onboard network processor Integrated DSU—Eliminates the need for a separate external device Subrate and scrambling options with support for major DSU vendors Independent internal and external clocking system Loopback (payload–supported only on T3 PIM, local, and remote), bit error...
Page 79: Dual-Port Fast Ethernet Pim
Physical Interface Modules Overview Table 31: Status LEDs for T3 and E3 Ports (continued) Color State Description Yellow On steadily Loopback mode. T3 (DS3)—Remote endpoint is in red alarm failure. E3—Remote defect indication (RDI). Unlit Offline. Dual-Port Fast Ethernet PIM The Dual-Port 10/100-Mbps Fast Ethernet PIM (Figure 30) has two physical Fast Ethernet ports.
Page 80: 4-Port Isdn Bri Pims
J2300, J4300, and J6300 Services Router Getting Started Guide Fast Ethernet LEDs indicate link status, port speed, and activity. Table 32 describes the meaning of the LEDs. Table 32: LEDs for Dual-Port Fast Ethernet PIM Label Color State Description LINK/SPEED...
Page 81: Adsl Pim
Physical Interface Modules Overview ISDN BRI PIMs provide the following key features: Onboard network processor Bandwidth on demand Dial backup Dial-on-demand routing backup (floating static and dialer watch) For pinouts of cable connectors for ISDN PIMs, see “ISDN RJ-45 Connector Pinout” on page 214. For installing and removing a PIM, see “Replacing a PIM”...
Page 82 J2300, J4300, and J6300 Services Router Getting Started Guide Figure 33: ADSL 2/2+ Annex A PIM Figure 34: ADSL 2/2+ Annex B PIM The ADSL PIM provides the following key features: Onboard network processor ADSL, ADSL2, and ADSL2+ protocols on the same PIM “Dying gasp”...
Page 83: G.shdsl Pim
Physical Interface Modules Overview Table 34: LEDs for ADSL PIMs Label Color State Description ONLINE Green On steadily PIM passed the self-test and is online and operational. Unlit PIM is offline. Green STATUS On steadily Online with no alarms or failures. On steadily Active with local or remote alarms.
Page 84 J2300, J4300, and J6300 Services Router Getting Started Guide Local and remote loopback diagnostics ITU-T G.991.2, ITU-T G.994.1, and ITU-T G.997.1 standards compliance For pinouts of cable connectors for G.SHDSL PIMs, see “ADSL and G.SHDSL RJ-11 Connector Pinout” on page 214.
Page 85: Services Router User Interface Overview
Chapter 4 Services Router User Interface Overview You can use two user interfaces to monitor, configure, troubleshoot, and manage a Services Router—the J-Web interface and the JUNOS command-line interface (CLI). This chapter contains the following topics: User Interface Overview on page 63 Before You Begin on page 66 Using the J-Web Interface on page 66 Using the Command-Line Interface on page 72...
Page 86: Cli Overview
J2300, J4300, and J6300 Services Router Getting Started Guide Router. For example, to display a summary of routing table entries, click Monitor in the task bar, then click Routing>Route Information in the side pane. The routes are displayed in the main pane.
Page 87: Services Router User Interface Overview
Services Router User Interface Overview Table 36: Services Router Configuration Interfaces Interface Description Capabilities Recommendations J-Web Quick Web browser pages for setting up the Configure basic router services: Use for basic Configuration Services Router quickly and easily without configuration. Setup configuring each statement individually.
Page 88: Before You Begin
J2300, J4300, and J6300 Services Router Getting Started Guide Table 36: Services Router Configuration Interfaces (continued) Interface Description Capabilities Recommendations J-Web Web browser pages divided into panes in Configure all router services: Use for complete configuration which you can do any of the following:...
Page 89: Starting The J-Web Interface
Services Router User Interface Overview Starting the J-Web Interface on page 67 J-Web Layout on page 67 J-Web Sessions on page 72 Starting the J-Web Interface To start the J-Web interface: Launch your HTTP-enabled or HTTPS-enabled Web browser. To use HTTPS, you must have installed a certificate on the Services Router and enabled HTTPS.
Page 90 J2300, J4300, and J6300 Services Router Getting Started Guide Main pane—Location where you monitor, configure, diagnose, and manage the Services Router by entering information in text boxes, making selections, and clicking buttons. Side pane—Displays suboptions of the Monitor, Configuration, Diagnose, or Manage task currently displayed in the main pane.
Page 91 Services Router User Interface Overview Figure 36: J-Web Layout Using the J-Web Interface...
Page 92 J2300, J4300, and J6300 Services Router Getting Started Guide Figure 37: J-Web Layout—Configuration Editor Using the J-Web Interface...
Page 93 Services Router User Interface Overview Table 37: Summary of J-Web Elements J-Web Interface Description Element Top Pane Juniper Networks logo Link to http://www.juniper.net in a new browser window. hostname – model Hostname and model of the Services Router. Logged in as: username Username you used to log in to the Services Router.
Page 94: J-Web Sessions
J2300, J4300, and J6300 Services Router Getting Started Guide J-Web Sessions You establish a J-Web session with the Services Router through an HTTP-enabled or HTTPS-enabled Web browser. The HTTPS protocol, which uses 128-bit encryption, is available only in domestic versions of the JUNOS software. To use HTTPS, you must have installed a certificate on the Services Router and enabled HTTPS.
Page 95: Starting The Cli
Services Router User Interface Overview Figure 38: CLI Command Hierarchy Example show isis ospf route system ......brief exact protocol table terse To execute a command, you enter the full command name, starting at the top level of the hierarchy.
Page 96: Cli Operational Mode
J2300, J4300, and J6300 Services Router Getting Started Guide Start the CLI. user# cli user@host> The presence of the angle bracket (>) prompt indicates the CLI has started. By default, the prompt is preceded by a string that contains your username and the hostname of the Services Router.
Page 97: Cli Configuration Mode
Services Router User Interface Overview To control the CLI environment, see “Configuring the CLI Environment” on page 79. To enter configuration mode, see “CLI Configuration Mode” on page 75. For information about the other CLI operational mode functions, see the J-series Services Router Administration Guide. CLI Configuration Mode To configure the Services Router, including system parameters, routing protocols, interfaces, network management, and user access, you must enter configuration...
Page 98: Cli Basics
J2300, J4300, and J6300 Services Router Getting Started Guide To configure the Services Router or to modify an existing configuration, you add statements to the configuration with the configuration mode edit commands. For more information about the CLI configuration editor and configuration mode, see the J-series Services Router Basic LAN and WAN Access Configuration Guide and the JUNOS software configuration guides.
Page 99: Command Completion
Services Router User Interface Overview Table 38: CLI Editing Keystrokes (continued) Task Category Action Keyboard Sequence Display previous command lines. Scroll backward through the list of recently executed Ctrl-p commands. Scroll forward through the list of recently executed Ctrl-n commands. Search the CLI history in reverse order for lines Ctrl-r matching the search string.
Page 100 J2300, J4300, and J6300 Services Router Getting Started Guide Type a question mark after entering the complete name of a command or command option. The CLI lists the available commands and options, then redisplays the command names and options that you typed: user@host>...
Page 101: Configuring The Cli Environment
Services Router User Interface Overview Table 39: help Commands CLI Command Description help apropos string Displays help based on a text string contained in a statement or command name. If the string contains spaces, enclose it in quotation marks. You also can specify a regular expression for the string, using standard UNIX-style regular expression syntax.
Page 102 J2300, J4300, and J6300 Services Router Getting Started Guide idle-timeout Set maximum idle time before login session ends prompt Set CLI command prompt string restart-on-upgrade Set whether CLI prompts to restart after software upgrade screen-length Set number of lines on screen...
Page 103 Services Router User Interface Overview Table 40: Configuring the CLI Environment (continued) Environment CLI Command Default Setting Options Feature Number of CLI set cli screen-width Variable (depends on terminal type). To change the number of characters characters displayed width displayed on a line, replace width with on a line a value between 0 and 100,000.
Page 104 J2300, J4300, and J6300 Services Router Getting Started Guide Using the Command-Line Interface...
Page 105: Installing A Services Router
Part 2 Installing a Services Router Preparing for Router Installation on page 85 Installing and Connecting a Services Router on page 95 Establishing Basic Connectivity on page 111 Configuring Secure Web Access on page 135 Configuring Autoinstallation on page 145 Installing and Managing J-series Licenses on page 151 Installing a Services Router...
Page 106: Part 2 Installing A Services Router
Installing a Services Router...
Page 107: Preparing For Router Installation
Chapter 5 Preparing for Router Installation Before installing a J-series Services Router, make sure that your site has the proper operating environment and equipment. Use the checklist at the end of the chapter to help you prepare your site. This chapter discusses the following topics: General Site Guidelines on page 85 Desktop and Wall Mounting Requirements on page 86 Rack Requirements on page 86...
Page 108: Desktop And Wall Mounting Requirements
If you are mounting the J2300 router on a wall, use wall screws or wall anchors capable of supporting the full weight of the chassis, up to 12 lb (5.4 kg). If possible, install the wall anchors into wall studs, which provide added support for the chassis.
Page 109: Preparing For Router Installation
If a front-mount rack is used, we recommend supporting the back of the router with a shelf or other structure. The J2300 chassis height of 1.75 in. (4.4 cm) equals 1 U. The J4300 and J6300 chassis height of 3.5 in. (8.7 cm) equals 2 U. Each U is a standard rack unit defined in Cabinets, Racks, Panels, and Associated Equipment (document number EIA-310-D) published by the Electronics Industry Association.
Page 110: Spacing Of Mounting Holes
Spacing of Mounting Holes The mounting holes in the mounting brackets provided with the J2300 Services Router chassis are spaced 1.25 in. (3.2 cm) apart, measured from the center of the hole. The mounting holes in the mounting brackets attached to the J4300 and J6300 chassis are spaced in two groups.
Page 111: Fire Suppression
NOTE: To keep warranties effective, do not use a dry chemical fire extinguisher to control a fire at or near a Juniper Networks router. If a dry chemical fire extinguisher is used, the unit is no longer eligible for coverage under a service agreement.
Page 112: Site Electrical Wiring Guidelines
DC Power, Connection, and Power Cable Specifications on page 92 Site Electrical Wiring Guidelines WARNING: DC-powered J2300 Services Routers are intended for installation in a dedicated equipment room where they are accessible by trained personnel only. DC-powered J4300 and J6300 Services Routers are intended for installation only in a restricted access location.
Page 113: Router Power Requirements
–42 to –72 VDC operating range DC input voltage DC system current rating 4 A @ –48 VDC (nominal, J2300 Services Router) 8 A @ –48 VDC (nominal, J4300 and J6300 Services Routers) AC Power, Connection, and Power Cord Specifications NOTE: The AC power cord for the Services Router is intended for use with the router only and not for any other use.
Page 114: Dc Power, Connection, And Power Cable Specifications
NOTE: Power cords and cables must not block access to router components or drape where people might trip on them. For information about the AC power supply, see “J2300 Power System” on page 19, “J4300 Power System” on page 31, or “J6300 Power System” on page 31.
Page 115: Network Cable Specifications
NOTE: Power cords and cables must not block access to router components or drape where people might trip on them. For information about the DC power supply, see “J2300 Power System” on page 19, “J4300 Power System” on page 31, or “J6300 Power System” on page 31.
Page 116: Isdn Provisioning
J2300, J4300, and J6300 Services Router Getting Started Guide ISDN Provisioning You might need a network termination type 1 (NT1) device to connect your ISDN interface to the ISDN service. Contact your service provider for details on the following information:...
Page 117: Installing And Connecting A Services Router
Before You Begin on page 95 Unpacking a J-series Services Router on page 96 Installing the J2300 Services Router on page 97 Installing the J4300 or J6300 Services Router on page 100 Connecting Interface Cables to a Services Router on page 101...
Page 118: Unpacking A J-Series Services Router
J2300, J4300, and J6300 Services Router Getting Started Guide Table 45: Equipment and Tools Required for Services Router Installation Desk Installation—J2300 Wall Installation—J2300 Services Services Router Only Router Only Rack Installation Rubber feet (provided) Rubber feet (provided) Mounting brackets and screws...
Page 119: Installing And Connecting A Services Router
You can install the J2300 Services Router on a desk, on a wall, or in a rack. The J2300 Services Router includes mounting brackets that support either wall or rack mounting, and rubber feet for desk and wall mounting.
Page 120: Installing The J2300 Services Router On A Wall
Rubber feet Installing the J2300 Services Router on a Wall You can install the J2300 Services Router on a wall. The router is shipped with mounting brackets and rubber feet in the accessory box. The rubber feet help stabilize the router on the wall and enhance airflow.
Page 121: Installing The J2300 Services Router Into A Rack
Installing and Connecting a Services Router Figure 41: Attaching Mounting Brackets to Install a J2300 Services Router on a Wall Installing the J2300 Services Router into a Rack You can front-mount the J2300 Services Router in a rack. The router is shipped with mounting brackets in the accessory box.
Page 122: Installing The J4300 Or J6300 Services Router
J2300, J4300, and J6300 Services Router Getting Started Guide Figure 42: Attaching Mounting Brackets to Install a J2300 Services Router in a Rack Installing the J4300 or J6300 Services Router WARNING: DC-powered Services Routers are intended for installation only in a restricted access location.
Page 123: Connecting Interface Cables To A Services Router
Installing and Connecting a Services Router Figure 43: Installing the J4300 or J6300 Services Router Front view Front-mounting bracket Rail Center Elliptical-hanger cutout screw Connecting Interface Cables to a Services Router You connect the interfaces installed in the Services Router to various network media.
Page 124: Connecting Power
(See “Connecting Power” on page 102.) Connecting Power J2300 or J4300 Services Routers have a single fixed power supply. J6300 Services Routers have one or two field-replaceable power supplies. For more information about the J-series power specifications, see “Power Guidelines, Requirements, and Specifications”...
Page 125 Installing and Connecting a Services Router For power cord requirements, see “AC Power, Connection, and Power Cord Specifications” on page 91 To connect AC power to the router: Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strip to the ESD point on the chassis.
Page 126: Connecting Dc Power
J2300, J4300, and J6300 Services Router Getting Started Guide Figure 44: Connecting AC Power to the J2300 Services Router To ground Washer Grounding lug Figure 45: Connecting AC Power to the J4300 Services Router To ground Washer Grounding lug Figure 46: Connecting AC Power to the J6300 Services Router...
Page 127 Installing and Connecting a Services Router Failure to do so makes the router susceptible to total power failure if one of the power supplies fails. The router must be connected to earth ground during normal operation. The protective earthing terminal on the rear of the chassis is provided to connect the router to ground.
Page 128 J2300, J4300, and J6300 Services Router Getting Started Guide Ensure that the voltage across the DC power source cable leads is 0 V and that there is no chance that the cable leads might become active during installation. CAUTION: There is no standard color coding for DC power cables. The color coding...
Page 129 Installing and Connecting a Services Router Figure 47: Connecting DC Power to the J2300 Services Router Ground terminal Washer Grounding lug DC Terminal block Screw with captive washer Connecting Power...
Page 130 J2300, J4300, and J6300 Services Router Getting Started Guide Figure 48: Connecting DC Power to the J4300 Services Router To ground Washer Grounding lug DC Terminal block Screw with captive washer Connecting Power...
Page 131: Powering A Services Router On And Off
Installing and Connecting a Services Router Figure 49: Connecting DC Power to the J6300 Services Router To ground Washer Grounding lug DC Terminal block Screw with captive washer Powering a Services Router On and Off To power on a Services Router, press the power button. The Routing Engine boots as the power supply completes its startup sequence.
Page 132 J2300, J4300, and J6300 Services Router Getting Started Guide Powering a Services Router On and Off...
Page 133: Chapter 7 Establishing Basic Connectivity
Chapter 7 Establishing Basic Connectivity The JUNOS software is preinstalled on the Services Router. When the router is powered on, it is ready to be configured. If the router does not have a configuration from the factory or your service provider, you must configure the software to establish basic connectivity.
Page 134: Basic Connectivity Overview
J2300, J4300, and J6300 Services Router Getting Started Guide Table 46: Basic Connectivity Terms Term Definition domain name Name that identifies the network or subnetwork of a router. Dynamic Host Configuration Protocol (DHCP) Protocol for assigning dynamic IP addresses to devices on a network.
Page 135: Establishing Basic Connectivity
Establishing Basic Connectivity Router Identification The domain name defines the network or subnetwork that the Services Router belongs to. The hostname refers to the specific machine, while the domain name is shared among all the devices in a given network. Together the hostname and domain name identify the router in the network.
Page 136: Network Settings
J2300, J4300, and J6300 Services Router Getting Started Guide For Common Criteria compliance, you must configure NTP to provide accurate timestamps for system log messages. For more information, see the Secure Configuration Guide for Common Criteria and JUNOS-FIPS. Network Settings A Domain Name System (DNS) server on the network maintains a database for resolving hostnames and IP addresses.
Page 137: Built-In Ethernet Interface Address
Establishing Basic Connectivity If you use the J-Web Set Up Quick Configuration page, you can either set a loopback address of your choice or have the loopback address automatically set to when you click Apply or OK to commit the configuration. 127.0.0.1 Built–In Ethernet Interface Address The built-in Fast Ethernet interfaces,...
Page 138: Before You Begin
J2300, J4300, and J6300 Services Router Getting Started Guide Telnet access to the root user is prohibited. You must use more secure methods, such as SSH, to log in as root If you are using a JUNOScript server to configure and monitor routers, you can...
Page 139: Connecting To A Services Router
Establishing Basic Connectivity IP address to be used for the loopback interface IP address of the built-in Ethernet interface that you will use for management purposes. The examples in this guide use the fe-0/0/0 interface. If you are performing the initial configuration with the J-Web interface, collect the following equipment: A management device, such as a laptop, with an Ethernet port An Ethernet cable...
Page 140 J2300, J4300, and J6300 Services Router Getting Started Guide To connect to the J-Web interface through port 0 on the router (see Figure 50 and Figure 51): On the management device, such as a PC or laptop, you use to access the...
Page 141: Connecting To The Cli Locally
Establishing Basic Connectivity Figure 50: Connecting to the Fast Ethernet Port on the J2300 Services Router Ethernet port Ethernet port RJ-45 cable Figure 51: Connecting to the Fast Ethernet Port on the J4300 or J6300 Services Router Ethernet port ST AT US...
Page 142 J2300, J4300, and J6300 Services Router Getting Started Guide NOTE: Figure 52 and Figure 53 show a connection to a local management device. A remote connection to the router through a modem requires the cable and connector shown (provided in the router’s accessory box), plus a DB-9 female to DB-25 male (or similar) adapter for your modem, which you must purchase separately.
Page 143: Connecting To The Cli Remotely
Establishing Basic Connectivity Figure 52: Connecting to the Console Port on the J2300 Services Router Serial port Adapter Console port RJ-45 rollover cable Figure 53: Connecting to the Console Port on the J4300 or J6300 Services Router Serial port Adapter...
Page 144: Configuring The Modem At The Router End
J2300, J4300, and J6300 Services Router Getting Started Guide modem connected to a remote management device. The modem connection allows you to remotely perform the same console operations you can perform locally. This section contains the following topics: Configuring the Modem at the Router End on page 122...
Page 145: Connecting The Modem To The Console Port
Establishing Basic Connectivity To configure the modem to accept modem control Data Terminal Ready (DTR) signals, enter AT&D1 To disable flow control, enter AT&K0 To save modem settings, enter AT&W Connecting the Modem to the Console Port NOTE: Most modems have an RS-232 DB-25 connector. You must separately purchase an adapter to connect your modem to the RJ-45 to DB-9 adapter and Ethernet cable supplied with the router.
Page 146: Configuring Basic Settings With J-Web Quick Configuration
J2300, J4300, and J6300 Services Router Getting Started Guide Configure the port settings as follows: Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: None In the HyperTerminal window, enter response verifies that the modem communicates successfully with the COM port on the PC or laptop.
Page 147 Establishing Basic Connectivity To apply the configuration and return to the Quick Configuration page, click OK. To cancel your entries and return to the Quick Configuration page, click Cancel. NOTE: After initial configuration is complete, the Services Router stops functioning as a DHCP server.
Page 148 J2300, J4300, and J6300 Services Router Getting Started Guide Table 47: Set Up Quick Configuration Summary (continued) Field Function Your Action Current System Time Synchronizes the system time with the To immediately set the time NTP server, or manually set the system using the NTP server, click Set time and date.
Page 149: Configuring Basic Settings With A Configuration Editor
Establishing Basic Connectivity Table 47: Set Up Quick Configuration Summary (continued) Field Function Your Action Allow JUNOScript over Clear-Text Access Allows JUNOScript to access the To enable JUNOScript access over clear router using a protocol for sending text, select the check box. unencrypted text over a TCP connection.
Page 150 J2300, J4300, and J6300 Services Router Getting Started Guide Navigate to the top of the configuration hierarchy in either the J-Web or CLI configuration editor. To configure basic settings, perform the configuration tasks described in Table 49. If you are using the J-Web interface, click Commit to view a summary of your changes, then click OK to commit the configuration.
Page 151 Establishing Basic Connectivity Table 49: Configuring Basic Settings (continued) Task J-Web Configuration Editor CLI Configuration Editor Define root authentication for access to In the Nested configuration section, Set the root password. For example: the router. next to Root authentication, click set root-authentication ssh-rsa Configure or Edit.
Page 152 J2300, J4300, and J6300 Services Router Getting Started Guide Table 49: Configuring Basic Settings (continued) Task J-Web Configuration Editor CLI Configuration Editor Add each domain that the router Next to Domain search, click Add Set the domains to be searched. For belongs to.
Page 153 Establishing Basic Connectivity Table 49: Configuring Basic Settings (continued) Task J-Web Configuration Editor CLI Configuration Editor Define the IP address for lo0.0. In the configuration editor From the [edit] hierarchy level, hierarchy, next to Interfaces, click enter Configure or Edit. edit interfaces In the Interface table, locate the lo0 Delete the existing IP address:...
Page 154: Verifying Basic Connectivity
J2300, J4300, and J6300 Services Router Getting Started Guide Verifying Basic Connectivity To verify that the Services Router has the settings you configured, perform the following task. Displaying Basic Connectivity Configurations Verify the configuration of basic connectivity. Because the basic connectivity...
Page 155 Establishing Basic Connectivity The output shows the configuration of basic connectivity. Verify that the values What It Means displayed are correct for your Services Router. For more information about the format of a configuration file, see the J-series Services Router Basic LAN and WAN Access Configuration Guide.
Page 156 J2300, J4300, and J6300 Services Router Getting Started Guide Verifying Basic Connectivity...
Page 157: Configuring Secure Web Access
Chapter 8 Configuring Secure Web Access You can manage a Services Router remotely through the J-Web interface. To communicate with the Services Router, the J-Web interface uses Hypertext Transfer Protocol (HTTP). HTTP allows easy Web access but no encryption. The data that is transmitted between the Web browser and the router by means of HTTP is vulnerable to interception and attack.
Page 158: Secure Web Access Overview
J2300, J4300, and J6300 Services Router Getting Started Guide Table 50: Secure Web Access Terms (continued) Term Definition Hypertext Transfer Protocol similar to HTTP with an added encryption layer that encrypts and decrypts Protocol over Secure user page requests and pages that are returned by a Web server. HTTPS is used for Sockets Layer (HTTPS) secure communication, such as payment transactions.
Page 159: Configuring Secure Web Access
Configuring Secure Web Access Before You Begin Before you begin initial configuration, complete the following tasks: Establish basic connectivity. See “Establishing Basic Connectivity” on page 111. Obtain an SSL certificate from a trusted signing authority. See “Generating SSL Certificates” on page 137. Generating SSL Certificates To enable secure Web access, you must first generate a digital SSL certificate, and then enable HTTPS access on the Services Router.
Page 160 J2300, J4300, and J6300 Services Router Getting Started Guide Figure 54: Quick Configuration Secure Access Page To configure Web access settings in the J-Web interface: Generate an SSL certificate. An SSL certificate is required for enabling HTTPS or SSL JUNOScript access. Skip this step if you are enabling HTTP access. For instructions about generating SSL certificates, see “Generating SSL Certificates”...
Page 161 Configuring Secure Web Access In the J-Web user interface, select Configuration>Quick Configuration>Secure Access. Enter information into the Secure Access Quick Configuration page, as described in Table 51. Click one of the following buttons: To apply the configuration and stay on the Quick Configuration page, click Apply.
Page 162 J2300, J4300, and J6300 Services Router Getting Started Guide Table 51: Secure Access Quick Configuration Summary Field Function Your Action Certificates Certificates Displays digital certificates required for To add a certificate: SSL access to the Services Router. Click Add. Opens the Add a Local Allows you to add and delete SSL Certificate page.
Page 163: Configuring Secure Web Access With A Configuration Editor
Configuring Secure Web Access Table 51: Secure Access Quick Configuration Summary (continued) Field Function Your Action Certificates HTTPS-Enabled Interfaces Allows you to specify interfaces on Select and deselect interfaces by which you want to enable HTTPS access. clicking the direction arrows: To enable HTTPS access on an interface, add the interface to the HTTPS Interfaces list.
Page 164: Verifying Secure Web Access
J2300, J4300, and J6300 Services Router Getting Started Guide Table 52: Configuring a Secure Web Access (continued) Task J-Web Configuration Editor CLI Configuration Editor Import the SSL Next to Certificates, click Configure. Enter certificate that you have set certificates local new load-key-file path Next to Local, click Add new entry.
Page 165: Displaying A Secure Access Configuration
Configuring Secure Web Access [edit] Sample Output user@R0# show security certificates { local { new { "-----BEGIN RSA PRIVATE KEY-----\nMIICXQIBAAKBgQC/C5UI4frNqbi qPwbTiOkJvqoDw2YgYse0Z5zzVJyErgSg954T\nEuHM67Ck8hAOrCnb0YO+SY Y5rCXLf4+2s8k9EypLtYRw/Ts66DZoXI4viqE7HSsK\n5sQw/UDBIw7/MJ+OpA ... KYiFf4CbBBbjlMQJ0HFudW6ISVBslONkzX+FT\ni95ddka6iIRnArEb4VFCRh+ e1QBdp1UjziYf7NuzDx4Z\n -----END RSA PRIVATE KEY-----\n-----BEGIN CERTIFICATE----- \nMIIDjDCCAvWgAwIBAgIBADANBgkqhkiG9w0BAQQ ... FADCBkTELMAkGA1UEBhMCdXMx\nCzAJBgNVBAgTAmNhMRIwEAYDVQQHEwlzdW5ue HB1YnMxDTALBgNVBAMTBGpucHIxJDAiBgkqhkiG\n9w0BCQEWFW5iaGFyZ2F2YUB fLUYAnBYmsYWOH\n -----END CERTIFICATE-----\n"; ## SECRET-DATA The output shows the intended secure access configuration. For more information What It Means about the format of a configuration file, see the J-series Services Router Basic LAN and WAN Access Configuration Guide.
Page 166 J2300, J4300, and J6300 Services Router Getting Started Guide Verifying Secure Web Access...
Page 167: Chapter 9 Configuring Autoinstallation
Chapter 9 Configuring Autoinstallation If you are setting up many J-series Services Routers, autoinstallation can help automate the configuration process. You can use either the J-Web configuration editor or CLI configuration editor to configure autoinstallation. The J-Web interface does not include Quick Configuration pages for autoinstallation. This chapter contains the following topics: Autoinstallation Terms on page 145 Autoinstallation Overview on page 146...
Page 168: Autoinstallation Overview
J2300, J4300, and J6300 Services Router Getting Started Guide Autoinstallation Overview Autoinstallation provides automatic configuration when a new Services Router is powered on without a configuration file or for a Services Router configured for autoinstallation. The autoinstallation process begins anytime a Services Router is powered on and a valid configuration file is not found in the nonvolatile RAM (NVRAM).
Page 169: Automatic Configuration Of A New Services Router
Configuring Autoinstallation specified, a DNS server must be available to translate the name of the TFTP server into an IP address. If the TFTP server is not on the same LAN segment as the new Services Router, or if a specific router is required by the network, then the IP address of an intermediary router must be specified.
Page 170: Configuring Autoinstallation With A Configuration Editor
J2300, J4300, and J6300 Services Router Getting Started Guide Create a configuration file and place it on a TFTP server on the network. A configuration file can be either of the following: A host-specific file with the name hostname.conf where hostname is the name of the Services Router.
Page 171: Verifying Autoinstallation
Configuring Autoinstallation To check the configuration, see “Verifying Autoinstallation” on page 149. Table 54: Configuring Autoinstallation Task J-Web Configuration Editor CLI Configuration Editor Navigate to the System level in the In the J-Web interface, select From the [edit] hierarchy level, enter configuration hierarchy.
Page 172 J2300, J4300, and J6300 Services Router Getting Started Guide From the CLI, enter the command. Action show system autoinstallation status Sample Output user@host> show system autoinstallation status Autoinstallation status: Master state: Active Last committed file: None Configuration server of last committed file: 10.25.100.1...
Page 173: Installing And Managing J-Series Licenses
(passwords) determines the features you can configure and use. For information about how to purchase J-series software licenses, contact your Juniper Networks sales representative. This chapter contains the following topics: J-series License Overview on page 151...
Page 174: License Key Components
J2300, J4300, and J6300 Services Router Getting Started Guide Table 55: J-series Services Router Software Feature Licenses Licensed Software Feature License Name IBM Networking Data link switching (DLSw) on all J-series Services Routers J-series Services Router Software License for Data Link...
Page 175: Managing J-Series Licenses With The J-Web Interface
Installing and Managing J-series Licenses Managing J-series Licenses with the J-Web Interface To manage licenses with the J-Web interface, you perform the following tasks: Adding New Licenses with the J-Web Interface on page 154 Deleting Licenses with the J-Web Interface on page 155 Displaying License Keys with the J-Web Interface on page 155 Downloading Licenses with the J-Web Interface on page 155 Figure 55 shows the J-Web Licenses page.
Page 176: Adding New Licenses With The J-Web Interface
J2300, J4300, and J6300 Services Router Getting Started Guide The Licenses page displays a summary of licensed features that are configured on the Services Router and a list of the licenses that are installed on the router. The information on the license management page is summarized in Table 56.
Page 177: Deleting Licenses With The J-Web Interface
Installing and Managing J-series Licenses In the License File URL box, type the full URL to the destination file containing the license key to be added. In the License Key Text box, paste the license key text, in plain-text format, for the license to be added. Click OK to add the license key.
Page 178: Managing J-Series Licenses With The Cli
J2300, J4300, and J6300 Services Router Getting Started Guide Select Save it to disk and specify the file to which the license keys are to be written. Go on to “Verifying J-series License Management” on page 157. Managing J-series Licenses with the CLI To manage the J-series licenses with the CLI, perform the following tasks.
Page 179: Saving License Keys With The Cli
Installing and Managing J-series Licenses Go on to “Verifying J-series License Management” on page 157. Saving License Keys with the CLI To save the licenses installed on the Services Router to a file with the CLI: Enter operational mode in the CLI. To save the installed license keys to a file or URL, enter the following command: request system license save filename | url For example, the following command saves the installed license keys to a file...
Page 180: Displaying License Usage
J2300, J4300, and J6300 Services Router Getting Started Guide License identifier: G03000002224 State: valid License version: 2 Valid for device: JN001875AB Features: dlsw - Data-Link Switching (DLSw) protocol License identifier: G03000002225 State: valid License version: 2 Valid for device: JN001875AB...
Page 181: Displaying Installed License Keys
Installing and Managing J-series Licenses The number of used licenses matches the number of configured features. If a licensed feature is configured, the feature is considered used. The sample output shows that the DLSw and BGP route reflection features are configured. A license is installed on the Services Router for each configured feature.
Page 182 J2300, J4300, and J6300 Services Router Getting Started Guide Verifying J-series License Management...
Page 183: Maintaining Services Router Hardware
Part 3 Maintaining Services Router Hardware Replacing and Troubleshooting Hardware Components on page 163 Contacting Customer Support and Returning Hardware on page 191 Maintaining Services Router Hardware...
Page 184 Maintaining Services Router Hardware...
Page 185: Replacing And Troubleshooting Hardware Components
Chapter 11 Replacing and Troubleshooting Hardware Components Because many of the Services Router’s hardware components are field-replaceable units (FRUs), you can remove and replace them yourself. When you need to replace a router component, contact your customer support or sales representative to order the field-replaceable unit (FRU) that contains the component.
Page 186: Replacing The Console Port Cable
J2300, J4300, and J6300 Services Router Getting Started Guide Table 57: Tools and Parts Required Tool or Part Components Electrostatic bag or antistatic mat Electrostatic discharge (ESD) grounding wrist strap Flat-blade screwdriver, approximately 1/4 in. (6 mm) Phillips (+) screwdriver, number 2...
Page 187: Chapter 11 Replacing And Troubleshooting Hardware Components
Replacing and Troubleshooting Hardware Components CAUTION: Do not hot-swap PIMs. Failure to power off the router before removing or installing a PIM might result in damage to the hardware. To remove a PIM (see Figure 56): Place an electrostatic bag or antistatic mat on a flat, stable surface to receive the PIM.
Page 188: Installing A Pim
J2300, J4300, and J6300 Services Router Getting Started Guide Figure 56: Removing a PIM ST AT US PO RT AL AR M C O N FI ST AT US PO W ER PO RT Captive screws Installing a PIM CAUTION: Do not hot-swap PIMs. Failure to power off the router before removing or installing a PIM might result in damage to the hardware.
Page 189 Replacing and Troubleshooting Hardware Components If necessary, arrange the cables to prevent them from dislodging or developing stress points: Secure each cable so that it is not supporting its own weight as it hangs to the floor. Place excess cable out of the way in a neatly coiled loop. Use fasteners to maintain the shape of cable loops.
Page 190: Replacing Pim Cables
J2300, J4300, and J6300 Services Router Getting Started Guide Replacing PIM Cables Removing and installing PIM cables does not affect Services Router function, except that a PIM does not receive or transmit data while its cable is disconnected. To replace a PIM cable, perform the following procedures:...
Page 191: Removing And Installing The Primary Compact Flash Disk
Replacing and Troubleshooting Hardware Components Repeat the previous steps for any additional cables. If the PIM is offline (its status LED is steadily red), issue the following CLI command to bring the PIM online: user@host> request chassis pic fpc-slot pim-slot pic-slot 0 online For example, to bring the PIM in slot 4 online, enter the following command: user@host>...
Page 192: Installing The Primary Compact Flash Disk
J2300, J4300, and J6300 Services Router Getting Started Guide the router is disconnected from earth ground. For more information about ESD, see the Getting Started Guide for your model. Press and release the power button to power off the router. Wait for the LED to turn off.
Page 193: Removing And Installing The Removable Compact Flash Disk
Replacing and Troubleshooting Hardware Components Loosen the thumbscrew that secures the primary compact flash drive cover on the rear of the chassis. Remove the compact flash drive cover. Slide the compact flash disk into the connector on the Routing Engine (see Figure 59).
Page 194: Removing The Removable Compact Flash Disk
J2300, J4300, and J6300 Services Router Getting Started Guide Removing the Removable Compact Flash Disk NOTE: Depending on your configuration, the Services Router might not have a backup compact flash drive. If no backup compact flash drive is installed, proceed directly to the next section, “Installing the Removable Compact Flash Disk”...
Page 195: Installing The Removable Compact Flash Disk
Replacing and Troubleshooting Hardware Components Figure 60: Removing the Removable Compact Flash Disk Installing the Removable Compact Flash Disk To install the removable compact flash disk, follow this procedure (see Figure 61): Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis, or to an outside ESD point if the router is disconnected from earth ground.
Page 196: Removing The Usb Storage Device
J2300, J4300, and J6300 Services Router Getting Started Guide compact flash disk fails on startup, and the removable compact flash disk is not installed or fails, the router boots from the USB storage device. For information about configuring the USB storage device, see the J-series Services Router Administration Guide.
Page 197: Installing The Usb Storage Device
The DRAM modules are located on the top of the Routing Engine, as shown in Figure 62 and Figure 63. NOTE: Use only DRAM modules purchased through Juniper Networks specifically for your model. Also, DRAM modules are not always transferable across J-series platforms.
Page 198 J2300, J4300, and J6300 Services Router Getting Started Guide Figure 62: J2300 DRAM Location DRAM Chassis rear Figure 63: J4300 and J6300 DRAM Location DRAM Chassis rear To modify the DRAM configuration, use the following procedures: Removing a DRAM Module on page 177...
Page 199: Removing A Dram Module
Replacing and Troubleshooting Hardware Components Removing a DRAM Module NOTE: Depending on your configuration, the Services Router might have an empty DRAM socket. If you are adding a DRAM module to the DRAM configuration, proceed directly to “Installing a DRAM Module” on page 178. To remove a DRAM module: Place an electrostatic bag or antistatic mat on a flat, stable surface.
Page 200: Installing A Dram Module
J2300, J4300, and J6300 Services Router Getting Started Guide Figure 64: Adding or Replacing a DRAM Module in a J2300 Chassis Remove Install Chassis rear Chassis rear Figure 65: Adding or Replacing a DRAM Module in a J4300 or J6300 Chassis...
Page 201: Replacing Power System Components
Replacing and Troubleshooting Hardware Components Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis, or to an outside ESD point if the router is disconnected from earth ground. For more information about ESD, see the Getting Started Guide for your router.
Page 202: Replacing An Ac Power Supply Cord
J2300, J4300, and J6300 Services Router Getting Started Guide remaining power supply instantly assumes the entire electrical load. One power supply can provide full power for as long as the router is operational. Each J6300 power supply is hot-insertable and hot-removable.
Page 203: Removing An Ac Power Supply From A J6300 Router
Replacing and Troubleshooting Hardware Components Insert the appliance coupler end of the replacement power cord into the appliance inlet on the power supply faceplate. Insert the power cord plug into an AC power source receptacle. NOTE: Each power supply must be connected to a dedicated AC power feed. For information about connecting to AC power sources, see “Connecting Power”...
Page 204: Installing An Ac Power Supply In A J6300 Router
J2300, J4300, and J6300 Services Router Getting Started Guide If you are not reinstalling a power supply into the emptied slot, install a blank power supply panel over the slot. Figure 66: Removing an AC Power Supply Installing an AC Power Supply in a J6300 Router...
Page 205: Replacing A Dc Power Supply Cable
Replacing and Troubleshooting Hardware Components Press and release the power button to power on the router. Verify that the LED lights steadily after you press the power button. POWER Figure 67: Installing an AC Power Supply Replacing a DC Power Supply Cable To replace a power cable for a DC power supply: Locate a replacement power cable and a lug that meet the specifications defined in “Chassis Grounding”...
Page 206: Removing A Dc Power Supply From A J6300 Router
J2300, J4300, and J6300 Services Router Getting Started Guide CAUTION: There is no standard color coding for DC power cables. The color coding used by the external DC power source at your site determines the color coding for the leads on the power cables that attach to the terminal studs on each power supply.
Page 207 Replacing and Troubleshooting Hardware Components the router is disconnected from earth ground. For more information about ESD, see “Preventing Electrostatic Discharge Damage” on page 221. Press and release the power button to power off the Services Router. Wait for LED to turn off. POWER Ensure that the voltage across the DC power source cable leads is 0 V and that the cable leads cannot become active during installation.
Page 208: Installing A Dc Power Supply In A J6300 Router
J2300, J4300, and J6300 Services Router Getting Started Guide Figure 68: Removing a DC Power Supply Installing a DC Power Supply in a J6300 Router Each power supply in a DC-powered router must be connected to earth ground. A ground terminal is provided on each DC power supply for this purpose.
Page 209 Replacing and Troubleshooting Hardware Components Firmly push the power supply into the chassis until it comes to a stop. Make sure that the power supply faceplate is flush with any adjacent power supply faceplate. Use a Phillips screwdriver to remove the clear plastic cover protecting the terminal block.
Page 210: Troubleshooting Hardware Components
J2300, J4300, and J6300 Services Router Getting Started Guide Figure 69: Installing a DC Power Supply Troubleshooting Hardware Components This section provides an overview of the resources you can use to troubleshoot hardware problems on the Services Router: Chassis Alarm Conditions on page 188...
Page 211 Check the air flow. (See “General Site Guidelines” on page 85.) Check the fans. (See “J2300 Cooling System” on page 19 or “J4300 and J6300 Cooling System” on page 32.) If you must replace a fan or the Routing Engine, contact JTAC.
Page 212: Contacting The Juniper Networks Technical Assistance Center
J2300, J4300, and J6300 Services Router Getting Started Guide Contacting the Juniper Networks Technical Assistance Center If you need assistance while troubleshooting a Services Router, open a support case using the Case Manager link at , or call 1-888-314-JTAC http://www.juniper.net/support/ (within the United States) or 1-408-745-9500 (from outside the United States).
Page 213: Contacting Customer Support And Returning Hardware
Contacting Customer Support and Returning Hardware This chapter describes how to return the Services Router or individual components to Juniper Networks for repair or replacement. It contains the following topics: Locating Component Serial Numbers on page 191 Contacting Customer Support on page 193...
Page 214 J2300, J4300, and J6300 Services Router Getting Started Guide Figure 70: J2300 Serial Number ID Label Serial number ID label Figure 71: J4300 Serial Number ID Label Serial number ID label Locating Component Serial Numbers...
Page 215: Pim Serial Number Label
Contacting Customer Support After you have located the serial numbers of the components you need to return, contact Juniper Networks Technical Assistance Center (JTAC) in one of the following ways. Contacting Customer Support...
Page 216: Information You Might Need To Supply To Jtac
This number is used to track the returned material at the factory and to return repaired or new components to the customer as needed. NOTE: Do not return any component to Juniper Networks unless you have first obtained an RMA number. Juniper Networks reserves the right to refuse shipments that do not have an RMA.
Page 217: Packing A Router Or Component For Shipment
Contacting Customer Support and Returning Hardware Obtain a Return Materials Authorization (RMA) number from the Juniper Networks Technical Assistance Center (JTAC). You can send e-mail or telephone as described above. Provide the following information in your e-mail message or during the...
Page 218: Packing Components For Shipment
J2300, J4300, and J6300 Services Router Getting Started Guide Retrieve the shipping carton and packing materials in which the router was originally shipped. If you do not have these materials, contact your Juniper Networks representative about approved packaging materials. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis, or to an outside ESD point if the router is disconnected from earth ground.
Page 219 Contacting Customer Support and Returning Hardware Place individual boards in electrostatic bags. Write the RMA number on the exterior of the box to ensure proper tracking. CAUTION: Do not stack any of the router components. Packing a Router or Component for Shipment...
Page 220 J2300, J4300, and J6300 Services Router Getting Started Guide Packing a Router or Component for Shipment...
Page 221: J-Series Requirements And Specifications
Part 4 J-series Requirements and Specifications Network Cable Specifications and Connector Pinouts on page 201 Safety and Regulatory Compliance Information on page 217 J-series Requirements and Specifications...
Page 222 J-series Requirements and Specifications...
Page 223: Chapter 13 Network Cable Specifications And Connector Pinouts
Chapter 13 Network Cable Specifications and Connector Pinouts The network interfaces supported on the router accept different kinds of network cable. Serial PIM Cable Specifications on page 201 RJ-45 Connector Pinout for Fast Ethernet Ports on page 210 Console Port Pinouts on page 210 E1 and T1 RJ-48 Cable Pinouts on page 211 E3 and T3 BNC Connector Pinout on page 214 ADSL and G.SHDSL RJ-11 Connector Pinout on page 214...
Page 224: Rs-232 Dte Cable Pinout
J2300, J4300, and J6300 Services Router Getting Started Guide Table 59: 2-Port Serial PIM Cables and Connectors (continued) End-to-End Name Connector Connector Hardware Conductors Pinouts EIA-530A DCE DB-25 female 4-40 threaded jacknuts Table 65 V.35 DTE M/34 male Standard (Normally...
Page 225: Rs-232 Dce Cable Pinout
Network Cable Specifications and Connector Pinouts Table 60: RS-232 DTE Cable Pinout (continued) LFH-60 Pin DB-25 Pin LFH-60 Pairing Description – – – 22 to 21 18 to 17 – – – RS-232 DCE Cable Pinout Table 61: RS-232 DCE Cable Pinout LFH-60 Pin DB-25 Pin LFH-60 Pairing...
Page 226: Rs-422/449 (Eia-449) Dce Cable Pinout
J2300, J4300, and J6300 Services Router Getting Started Guide Table 62: RS-422/449 (EIA-449) DTE Cable Pinout (continued) LFH-60 Pin DC-37 (DB-37) Pin LFH-60 Pairing Description Clear to Send (A) – Local Loopback Data Mode (A) Terminal Ready (A) Receive Ready (A) Terminal Timing (A) –...
Page 227: Eia-530A Dte Cable Pinout
Network Cable Specifications and Connector Pinouts Table 63: RS-422/449 (EIA-449) DCE Cable Pinout (continued) LFH-60 Pin DC-37 (DB-37) Pin LFH-60 Pairing Description Data Mode (A) Terminal Ready (A) Receive Ready (A) Terminal Timing (A) – Signal Ground – Receive Common Send Data (B) Send Timing (B) Receive Data (B)
Page 228: Eia-530A Dce Cable Pinout
J2300, J4300, and J6300 Services Router Getting Started Guide Table 64: EIA-530A DTE Cable Pinout (continued) LFH-60 Pin DB-25 Pin LFH-60 Pairing Description Received Line Signal Detector Terminal Timing (B) Transmit Clock (B) Clear to Send (B) Transmit Data (B)
Page 229: V.35 Dte Cable Pinout
Network Cable Specifications and Connector Pinouts Table 65: EIA-530A DCE Cable Pinout (continued) LFH-60 Pin DB-25 Pin LFH-60 Pairing Description Transmit Clock (B) Clear to Send (B) Transmit Data (B) Transmit Clock (A) Receive Data (B) Receive Clock (A) – Local Loopback Request to Send (B) –...
Page 230: V.35 Dce Cable Pinout
J2300, J4300, and J6300 Services Router Getting Started Guide Table 66: V.35 DTE Cable Pinout (continued) LFH-60 Pin M/34 Pin LFH-60 Pairing Description Transmit Timing (A) Transmit Timing (B) – – – 22 to 21 26 to 25 – –...
Page 231: X.21 Dte Cable Pinout
Network Cable Specifications and Connector Pinouts Table 67: V.35 DCE Cable Pinout (continued) LFH-60 Pin M/34 Pin LFH-60 Pairing Description – – – 22 to 21 26 to 25 – – – X.21 DTE Cable Pinout Table 68: X.21 DTE Cable Pinout LFH-60 Pin DB-15 Pin LFH-60 Pairing...
Page 232: Rj-45 Connector Pinout For Fast Ethernet Ports
J2300, J4300, and J6300 Services Router Getting Started Guide Table 69: X.21 DCE Cable Pinout (continued) LFH-60 Pin DB-15 Pin LFH-60 Pairing Description – Signal Ground Transmit Data (B) Control (B) Receive (B) Indicate (B) Signal Element Timing (B) –...
Page 233: E1 And T1 Rj-48 Cable Pinouts
Network Cable Specifications and Connector Pinouts Table 71: RJ-45 Console Connector Pinout Signal Description RTS Output Request to Send DTR Output Data Terminal Ready TxD Output Transmit Data Chassis Ground Chassis Ground RxD Input Receive Data DSR Input Data Set Ready CTS Input Clear to Send Table 72 describes the DB-9 connector pinouts.
Page 234 J2300, J4300, and J6300 Services Router Getting Started Guide Table 73: RJ-48 Connector to RJ-48 Connector (Straight) Pinout RJ-48 Pin (on T1/E1 RJ-48 Pin PIM) (Data Numbering (Data Numbering Form) Form) Signal RX, Ring, – RX, Tip, + TX, Ring, –...
Page 235 Network Cable Specifications and Connector Pinouts Table 75: RJ-48 Connector to DB-15 Connector (Straight) Pinout (continued) RJ-48 Pin (on T1/E1 DB-15 Pin PIM) (Data numbering (Data numbering form) form) Signal No connect No connect No connect No connect No connect No connect No connect No connect...
Page 236: E3 And T3 Bnc Connector Pinout
J2300, J4300, and J6300 Services Router Getting Started Guide Table 76: RJ-48 Connector to DB-15 Connector (Crossover) Pinout (continued) RJ-48 Pin (on T1/E1 DB-15 Pin PIM) (Data numbering (Data numbering form) form) Signal No connect No connect No connect No connect E3 and T3 BNC Connector Pinout The E3 and T3 PIMs each use two BNC connectors—one for transmitting...
Page 237 Network Cable Specifications and Connector Pinouts Table 78: ISDN RJ-45 Connector Pinout (continued) Signal RJ_SX_P RJ_SR_P RJ_SR_N RJ_SX_N No connect No connect Shielded Shielded 2 ISDN RJ-45 Connector Pinout...
Page 238 J2300, J4300, and J6300 Services Router Getting Started Guide ISDN RJ-45 Connector Pinout...
Page 239: Safety And Regulatory Compliance Information
Chapter 14 Safety and Regulatory Compliance Information To install and use the Services Router safely, follow proper safety procedures. This chapter discusses the following safety and regulatory compliance information: Definition of Safety Warning Levels on page 217 Safety Guidelines and Warnings on page 219 Agency Approvals on page 256 Compliance Statements for Environmental Requirements on page 257 Compliance Statements for EMC Requirements on page 257...
Page 240 J2300, J4300, and J6300 Services Router Getting Started Guide WARNING: Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico’s en dient u op de hoogte te zijn van standaard...
Page 241: Safety Guidelines And Warnings
Safety and Regulatory Compliance Information WARNING: Aviso Este símbolo de aviso indica perigo. Encontra-se numa situação que lhe poderá causar danos físicos. Antes de começar a trabalhar com qualquer equipamento, familiarize-se com os perigos relacionados com circuitos eléctricos, e com quaisquer práticas comuns que possam prevenir possíveis acidentes. WARNING: ¡Atención! Este símbolo de aviso significa peligro.
Page 242: Qualified Personnel Warning
J2300, J4300, and J6300 Services Router Getting Started Guide Keep the area around the chassis clear and free from dust before, during, and after installation. Keep tools away from areas where people could trip over them while walking. Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could become caught in the chassis.
Page 243: Preventing Electrostatic Discharge Damage
Safety and Regulatory Compliance Information Varoitus Ainoastaan koulutettu ja pätevä henkilökunta saa asentaa tai vaihtaa tämän laitteen. Attention Tout installation ou remplacement de l’appareil doit être réalisé par du personnel qualifié et compétent. Warnung Gerät nur von geschultem, qualifiziertem Personal installieren oder auswechseln lassen.
Page 244: Electrical Safety Guidelines And Warnings
J2300, J4300, and J6300 Services Router Getting Started Guide Avoid contact between the component and your clothing. ESD voltages emitted from clothing can still damage components. When removing or installing a component, always place it component-side up on an antistatic surface, in an antistatic card rack, or in an electrostatic bag (see Figure 73).
Page 245: General Electrical Safety Guidelines
Safety and Regulatory Compliance Information Warning Statement for Norway and Sweden on page 231 In Case of Electrical Accident on page 231 Multiple Power Supplies Disconnection Warning on page 231 Power Disconnection Warning on page 233 TN Power Warning on page 234 Telecommunication Line Cord Warning on page 235 General Electrical Safety Guidelines Install the Services Router in compliance with the following local, national, or...
Page 246: Ac Power Electrical Safety Guidelines
J2300, J4300, and J6300 Services Router Getting Started Guide AC Power Electrical Safety Guidelines The following electrical safety guidelines apply to AC-powered routers: AC-powered routers are shipped with a three-wire electrical cord with a grounding-type plug that fits only a grounding-type power outlet. Do not circumvent this safety feature.
Page 247: Dc Power Electrical Safety Guidelines
Safety and Regulatory Compliance Information DC Power Electrical Safety Guidelines The following electrical safety guidelines apply to a DC-powered router: A DC-powered router is equipped with a DC terminal block that is rated for the power requirements of a maximally configured router. To supply sufficient power, terminate the DC input wiring on a facility DC source capable of supplying at least 8 A @ –48 VDC.
Page 248: Dc Power Disconnection Warning
J2300, J4300, and J6300 Services Router Getting Started Guide DC Power Disconnection Warning WARNING: Before performing any of the following procedures, ensure that power is removed from the DC circuit. To ensure that all power is off, locate the circuit...
Page 249: Dc Power Grounding Requirements And Warning
Safety and Regulatory Compliance Information asegurarse de que toda la alimentación esté cortada (OFF), localizar el interruptor automático en el panel que alimenta al circuito de corriente continua, cambiar el interruptor automático a la posición de Apagado (OFF), y sujetar con cinta la palanca del interruptor automático en posición de Apagado (OFF).
Page 250: Dc Power Wiring Sequence Warning
J2300, J4300, and J6300 Services Router Getting Started Guide Varning! Vid installation av enheten måste jordledningen alltid anslutas först och kopplas bort sist. DC Power Wiring Sequence Warning WARNING: Wire the DC power supply using the appropriate lugs. When connecting power, the proper wiring sequence is ground to ground, +RTN to +RTN, then -48 V to -48 V.
Page 251: Dc Power Wiring Terminations Warning
Safety and Regulatory Compliance Information a +RTN, entonces molió para moler. Observe que el alambre de tierra se debe conectar siempre primero y desconectar por último. Observe que el alambre de tierra se debe conectar siempre primero y desconectar por último. ¡Atención! Wire a fonte de alimentação de DC Usando os talões apropriados na extremidade da fiação.
Page 252: Grounded Equipment Warning
J2300, J4300, and J6300 Services Router Getting Started Guide Advarsel Hvis det er nødvendig med flertrådede ledninger, brukes godkjente ledningsavslutninger, som for eksempel lukket sløyfe eller spadetype med oppoverbøyde kabelsko. Disse avslutningene skal ha riktig størrelse i forhold til ledningene, og skal klemme sammen både isolasjonen og lederen.
Page 253: Warning Statement For Norway And Sweden
Safety and Regulatory Compliance Information Aviso Este equipamento deverá estar ligado à terra. Certifique-se que o host se encontra ligado à terra durante a sua utilização normal. ¡Atención! Este equipo debe conectarse a tierra. Asegurarse de que el equipo principal esté conectado a tierra durante el uso normal. Varning! Denna utrustning är avsedd att jordas.
Page 254 J2300, J4300, and J6300 Services Router Getting Started Guide WARNING: Varoitus Tässä laitteessa on useampia virtalähdekytkentöjä. Kaikki kytkennät on irrotettava kokonaan, jotta virta poistettaisiin täysin laitteesta. WARNING: Attention Cette J6300 unité est équipée de plusieurs raccordements d’alimentation. Pour supprimer tout courant électrique de l’unité, tous les cordons d’alimentation doivent être débranchés.
Page 255: Power Disconnection Warning
Safety and Regulatory Compliance Information WARNING: Varning! Denna J6300 enhet har mer än en strömförsörjningsanslutning; alla anslutningar måste vara helt avlägsnade innan strömtillförseln till enheten är fullständigt bruten. Power Disconnection Warning WARNING: Before working on the router or near power supplies, unplug the power cord from an AC router.
Page 256: Tn Power Warning
J2300, J4300, and J6300 Services Router Getting Started Guide WARNING: Advarsel Før det utføres arbeid på kabinettet eller det arbeides i nærheten av strømforsyningsenheter, skal strømledningen trekkes ut på vekselstrømsenheter. WARNING: Aviso Antes de trabalhar num chassis, ou antes de trabalhar perto de unidades de fornecimento de energia, desligue o cabo de alimentação nas unidades...
Page 257: Telecommunication Line Cord Warning
Safety and Regulatory Compliance Information WARNING: Attention Ce dispositif a été conçu pour fonctionner avec des systèmes d’alimentation TN. WARNING: Warnung Das Gerät ist für die Verwendung mit TN-Stromsystemen ausgelegt. WARNING: Avvertenza Il dispositivo è stato progettato per l’uso con sistemi di alimentazione TN.
Page 258 J2300, J4300, and J6300 Services Router Getting Started Guide WARNING: Waarschuwing Om brandgevaar te reduceren, dient slechts telecommunicatielijnsnoer nr. 26 AWG of groter gebruikt te worden. WARNING: Varoitus Tulipalovaaran vähentämiseksi käytä ainoastaan nro 26 AWG- tai paksumpaa tietoliikennejohdinta. WARNING: Attention Pour réduire les risques d’incendie, n’utiliser que des cordons de lignes de télécommunications de type AWG nº...
Page 259: Installation Safety Guidelines And Warnings
The weight of a fully populated chassis is approximately 12 lbs (5.4 kg) for a J2300 Services Router, 21 lbs (9.5 kg) for a J4300 Services Router, and 24 lb (10.9 kg) for a J6300 Services Router. Observe the following guidelines for lifting and moving a Services Router: Before moving the Services Router, read the guidelines in “Preparing for Router...
Page 260: Rack-Mounting Requirements And Warnings
J2300, J4300, and J6300 Services Router Getting Started Guide Attention Avant de brancher le système sur la source d’alimentation, consulter les directives d’installation. Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an die Stromquelle anschließen. WARNING: Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema all’alimentatore.
Page 261 Les directives ci-dessous sont destinées à assurer la protection du personnel: Le rack sur lequel est monté le Juniper Networks router doit être fixé à la structure du bâtiment. Safety Guidelines and Warnings...
Page 262 Le seguenti direttive vengono fornite per garantire la sicurezza personale: Il Juniper Networks router deve essere installato in un telaio, il quale deve essere fissato alla struttura dell’edificio. Questa unità deve venire montata sul fondo del supporto, se si tratta dell’unica unità...
Page 263 Para garantizar su seguridad, proceda según las siguientes instrucciones: El Juniper Networks router debe instalarse en un bastidor fijado a la estructura del edificio. Colocar el equipo en la parte inferior del bastidor, cuando sea la única unidad en el mismo.
Page 264: Ramp Warning
Följande riktlinjer ges för att trygga din säkerhet: Juniper Networks router måste installeras i en ställning som är förankrad i byggnadens struktur. Om denna enhet är den enda enheten på ställningen skall den installeras längst ned på...
Page 265: Laser And Led Safety Guidelines And Warnings
Safety and Regulatory Compliance Information ¡Atención! No usar una rampa inclinada más de 10 grados Varning! Använd inte ramp med en lutning på mer än 10 grader. Laser and LED Safety Guidelines and Warnings Single-mode Physical Interface Modules (PIMs) are equipped with laser transmitters, which are considered a Class 1 Laser Product by the U.S.
Page 266: Class 1 Led Product Warning
J2300, J4300, and J6300 Services Router Getting Started Guide Waarschuwing Klasse-1 laser produkt. Varoitus Luokan 1 lasertuote. Attention Produit laser de classe I. Warnung Laserprodukt der Klasse 1. WARNING: Avvertenza Prodotto laser di Classe 1. Advarsel Laserprodukt av klasse 1.
Page 267: Laser Beam Warning
Safety and Regulatory Compliance Information Laser Beam Warning WARNING: Do not stare into the laser beam or view it directly with optical instruments. WARNING: Waarschuwing Niet in de straal staren of hem rechtstreeks bekijken met optische instrumenten. WARNING: Varoitus Älä katso säteeseen äläkä tarkastele sitä suoraan optisen laitteen avulla.
Page 268: Radiation From Open Port Apertures Warning
J2300, J4300, and J6300 Services Router Getting Started Guide WARNING: ¡Atención! No mirar fijamente el haz ni observarlo directamente con instrumentos ópticos. WARNING: Varning! Rikta inte blicken in mot strålen och titta inte direkt på den genom optiska instrument. Radiation from Open Port Apertures Warning...
Page 269: Maintenance And Operational Safety Guidelines And Warnings
Safety and Regulatory Compliance Information WARNING: Avvertenza Quando i cavi in fibra non sono inseriti, radiazioni invisibili possono essere emesse attraverso l’apertura della porta. Evitate di esporvi alle radiazioni e non guardate direttamente nelle aperture. WARNING: Advarsel Unngå utsettelse for stråling, og stirr ikke inn i åpninger som er åpne, fordi usynlig stråling kan emiteres fra portens åpning når det ikke er tilkoblet en fiberkabel.
Page 270: Battery Handling Warning
J2300, J4300, and J6300 Services Router Getting Started Guide Battery Handling Warning WARNING: Replacing the battery incorrectly might result in an explosion. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Page 271: Jewelry Removal Warning
Safety and Regulatory Compliance Information WARNING: Avvertenza Pericolo di esplosione se la batteria non è installata correttamente. Sostituire solo con una di tipo uguale o equivalente, consigliata dal produttore. Eliminare le batterie usate secondo le istruzioni del produttore. WARNING: Aviso Existe perigo de explosão se a bateria for substituída incorrectamente.
Page 272 J2300, J4300, and J6300 Services Router Getting Started Guide WARNING: Varoitus Ennen kuin työskentelet voimavirtajohtoihin kytkettyjen laitteiden parissa, ota pois kaikki korut (sormukset, kaulakorut ja kellot mukaan lukien). Metalliesineet kuumenevat, kun ne ovat yhteydessä sähkövirran ja maan kanssa, ja ne voivat aiheuttaa vakavia palovammoja tai hitsata metalliesineet kiinni liitäntänapoihin.
Page 273: Lightning Activity Warning
Safety and Regulatory Compliance Information a ligação à terra, podendo causar queimaduras graves ou ficarem soldados aos terminais. WARNING: ¡Atención! Antes de operar sobre equipos conectados a líneas de alimentación, quitarse las joyas (incluidos anillos, collares y relojes). Los objetos de metal se calientan cuando se conectan a la alimentación y a tierra, lo que puede ocasionar quemaduras graves o que los objetos metálicos queden soldados a los bornes.
Page 274: Operating Temperature Warning
J2300, J4300, and J6300 Services Router Getting Started Guide WARNING: Warnung Arbeiten Sie nicht am System und schließen Sie keine Kabel an bzw. trennen Sie keine ab, wenn es gewittert. WARNING: Avvertenza Non lavorare sul sistema o collegare oppure scollegare i cavi durante un temporale con fulmini.
Page 275 15,2 cm tilaa. WARNING: Attention Pour éviter toute surchauffe des routeurs de la gamme Juniper Networks router, ne l’utilisez pas dans une zone où la température ambiante est supérieure à 40 ο C. Pour permettre un flot d’air constant, dégagez un espace d’au moins 15,2 cm autour des ouvertures de ventilations.
Page 276: Product Disposal Warning
40 ο C. Para evitar a restrição à circulação de ar, deixe pelo menos um espaço de 15,2 cm à volta das aberturas de ventilação. WARNING: ¡Atención! Para impedir que un encaminador de la serie Juniper Networks router se recaliente, no lo haga funcionar en un área en la que se supere la temperatura ambiente máxima recomendada de 40 ο...
Page 277 Safety and Regulatory Compliance Information WARNING: Attention La mise au rebut définitive de ce produit doit être effectuée conformément à toutes les lois et réglementations en vigueur. WARNING: Warnung Dieses Produkt muß den geltenden Gesetzen und Vorschriften entsprechend entsorgt werden. WARNING: Avvertenza L’eliminazione finale di questo prodotto deve essere eseguita osservando le normative italiane vigenti in materia WARNING: Advarsel Endelig disponering av dette produktet må...
Page 278: Agency Approvals
J2300, J4300, and J6300 Services Router Getting Started Guide Agency Approvals The Services Router complies with the following standards: Safety CAN/CSA-22.2 No. 60950–1–03–UL 60950–1 Safety of Information Technology Equipment EN 60950–1 Safety of Information Technology Equipment EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification, Requirements and User’s Guide...
Page 279: Compliance Statements For Environmental Requirements
Safety and Regulatory Compliance Information Compliance Statements for Environmental Requirements Lithium Battery Batteries in this product are not based on mercury, lead, or cadmium substances. The batteries used in this product are in compliance with EU Directives 91/157/EEC, 93/86/EEC, and 98/101/EEC. The product documentation includes instructional information on the proper method of reclamation and recycling.
Page 280 J2300, J4300, and J6300 Services Router Getting Started Guide CAUTION: Users should not attempt to make electrical ground connections by themselves, but should contact the appropriate inspection authority or an electrician, as appropriate. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together.
Page 281: European Community
1194 N. Mathilda Ave Sunnyvale, CA. 94089 USA declares that under our sole responsibility the product(s) J2300 Sevices Router are in conformity with the provisions of the following EC Directives, including all amendments, and with national legislation implementing these directives:...
Page 282: Declaration Of Conformity
J2300, J4300, and J6300 Services Router Getting Started Guide DOC 0015 Declaration of Conformity Juniper Networks, Inc. 1194 N. Mathilda Ave Sunnyvale, CA. 94089 USA declares that under our sole responsibility the product(s) J4300 Sevices Router are in conformity with the provisions of the following EC Directives, including all amendments,...
Page 283 Safety and Regulatory Compliance Information DOC 0016 Declaration of Conformity Juniper Networks, Inc. 1194 N. Mathilda Ave Sunnyvale, CA. 94089 USA declares that under our sole responsibility the product(s) J6300 Sevices Router are in conformity with the provisions of the following EC Directives, including all amendments,...
Page 284: Japan
J2300, J4300, and J6300 Services Router Getting Started Guide Japan The preceding translates as follows: This is a Class B product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this product is used near a radio or television receiver in a domestic environment, it may cause radio interference.
Page 285: Fcc Part 15 Statement
Safety and Regulatory Compliance Information FCC Part 15 Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 286: Product Reclamation And Recycling Program
J2300, J4300, and J6300 Services Router Getting Started Guide Product Reclamation and Recycling Program Juniper Networks is committed to environmentally responsible behavior. As part of this commitment, we continually work to comply with environmental standards such as the European Union’s Waste Electrical and Electronic Equipment (WEEE) Directive and Restriction of Hazardous Substances (RoHS) Directive.
Page 287 Part 5 Index Index...
Page 288 Index...
Page 289 J2300 system ........
Page 290 J2300 ........
Page 291 J2300 ........
Page 292 J2300 system ........
Page 293 CLI Dual-Port E1 chassis (J2300) ......43 displaying ..........79 Dual-Port E1 PIM.
Page 294 169, 191 J2300 front panel ........14 front panel J4300 components .
Page 295 HTTPS Web access ....... . 135 desk (J2300 only) ........97 installation and connection .
Page 296 J2300, J4300, and J6300 Services Router Getting Started Guide connecting ......... .117 Dual-Port Serial PIM .
Page 297 ......246 Juniper Networks logo LED.......14 safety guidelines .
Page 298 ....... . . 164 J2300 rack installation......100 DC power cable, replacing .
Page 299 J2300 USB..........17 J2300 fixed PIMs........39 J4300 LAN.
Page 300 J2300 ........
Page 301 ....156 J2300 functions and components ....12 request system license save command .
Page 302 J2300 ........
Page 303 (Quick Configuration) ....126 J2300 hardware........12 overview .
Page 304 J2300 USB port ........17...
Page 305 J2300 ........

This manual is also suitable for:

J4300 J6300

Juniper J2300 Getting Started Manual

Chapter 1 Overview of J2300, J4300, and J6300 Services Routers

Chapter 2 System Overview

Chapter 3 Physical Interface Modules Overview

Chapter 4 Services Router User Interface Overview

Chapter 5 Preparing for Router Installation

Chapter 6 Installing and Connecting a Services Router

Chapter 7 Establishing Basic Connectivity

Chapter 8 Configuring Secure Web Access

Chapter 9 Configuring Autoinstallation

Chapter 10 Installing and Managing J-Series Licenses

Chapter 11 Replacing and Troubleshooting Hardware Components

Chapter 12 Contacting Customer Support and Returning Hardware

Chapter 13 Network Cable Specifications and Connector Pinouts

Quick Links

Troubleshooting

Related Manuals for Juniper J2300

Summary of Contents for Juniper J2300