Verifying Firewall Filter Configuration; Displaying Firewall Filter Configurations - Juniper J2300 User Manual

To view the configuration of the Routing Engine interface, enter the
show interfaces lo0
user@host# show interfaces lo0
unit 0 {
}

Verifying Firewall Filter Configuration

To verify a firewall filter configuration, perform these tasks:

Displaying Firewall Filter Configurations

Verify the configuration of the firewall filter. You can analyze the flow of the firewall
Purpose
filter terms by displaying the entire configuration.
From the J-Web interface, select
Action
Configuration>View and Edit>View Configuration Text.
Alternatively, from configuration mode in the CLI, enter the
show firewall
command. For example:
family inet {
filter {
input protect-RE;
}
address 127.0.0.1/32;
}
Displaying Firewall Filter Configurations on page 415
Verifying a Stateful Firewall Filter on page 420
Displaying Firewall Filter Logs on page 421
Displaying Firewall Filter Statistics on page 422
Verifying a Services, Protocols, and Trusted Sources Firewall Filter on page 423
Verifying a TCP and ICMP Flood Firewall Filter on page 424
Verifying a Firewall Filter That Handles Fragments on page 425
command for stateful and stateless firewall filters.
Configuring Firewall Filters and NAT
show services
Verifying Firewall Filter Configuration
or
415