Juniper J2300 User Manual page 520

J-series™ Services Router User Guide
Task
Configure the local gateway for the
IPSec service set.
Configure IPSec rules to set the remote
gateway on all traffic to 2.2.2.2.
Because the rule applies to all traffic,
you must only configure the action (or
then statement) for the term.
490
Configuring an IPSec Tunnel with a Configuration Editor
J-Web Configuration Editor
1.
In the Ipsec vpn options field, click
Configure.
2.
In the Local gateway box, type
the IP address of the local tunnel
endpoint, in dotted decimal
notation—for example, 1.1.1.1.
1.
From the top of the
configuration hierarchy, click
Services>Ipsec-vpn.
2. In the Rule field, click Add new
entry.
3. In the Rule name field, type the
name of the rule. The rule name
can be any unique string.
4.
In the term field, click Add new
entry.
5.
In the Term name field, type the
name of the term. It can be any
unique string.
6. To configure an action, click Then.
7.
In the Remote gateway field,
type the remote gateway address,
in dotted decimal notation—for
example, 2.2.2.2.
8. Click OK.
CLI Configuration Editor
Set the local gateway address for the
service set:
set service-set service-set-name
ipsec-vpn-options local-gateway 1.1.1.1
1.
From the top of the configuration
hierarchy, enter
edit services ipsec-vpn
2. Configure a rule with a term
that sets the remote gateway to
2.2.2.2:
set rule rule-name term
term-name then remote-gateway
2.2.2.2