J-Series User Interface Overview; User Interface Overview; J-Web Overview - Juniper J2300 User Manual

Chapter 7

J-series User Interface Overview

User Interface Overview

J-Web Overview

You can use two user interfaces to monitor, configure, troubleshoot, and manage
the Services Router—the J-Web interface and the JUNOS command-line interface
(CLI). This chapter contains the following topics:
User Interface Overview on page 109
Before You Begin on page 112
Using the J-Web Interface on page 112
Using the Command-Line Interface on page 117
This section contains the following topics:
J-Web Overview on page 109
CLI Overview on page 110
Comparison of Configuration Interfaces on page 110
The J-Web graphical user interface (GUI) allows you to monitor, configure,
troubleshoot, and manage the Services Router on a client by means of
an HTTP- or HTTPS-enabled Web browser. The J-Web interface provides
access to all the configuration statements supported by the router, so you
can fully configure it without using the CLI.
The J-Web interface provides two methods of Services Router configuration:
Quick Configuration
Configuration editor
For more information, see "Comparison of Configuration Interfaces" on page 110.
In addition to configuration, you can use the J-Web interface to perform many
monitoring, troubleshooting, and management tasks on the Services Router. For
User Interface Overview
109