Juniper J2300 User Manual page 89

NOTE: The Ethernet rollover cable and RJ-45 to DB-9 serial port adapter are
provided in the router's accessory box.
Plug the RJ-45 to DB-9 serial port adapter into the serial port on the
3.
management device (see Figure 22 and Figure 23).
Connect the other end of the Ethernet rollover cable to the console port on the
4.
router (see Figure 22 and Figure 23).
Turn on the power to the management device.
5.
Start your asynchronous terminal emulation application (such as Microsoft
6.
Windows Hyperterminal) and select the appropriate
example, ).
COM1
Configure the port settings as follows:
7.
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Power on the router by pressing the power button on the front panel. Verify
8.
that the LED on the front panel turns green.
POWER ON
The terminal emulation screen on your management device displays the boot
sequence. When the router has finished booting, a login prompt appears.
Log in as the user "root". There is no password.
9.
Configuring the Services Router with a Configuration Editor
Establishing Basic Connectivity
port to use (for
COM
59