Juniper J2300 User Manual page 35

Feature Category J-series Feature
Intermediate System-to-Intermediate System (IS-IS)
Multicast:
Static addresses
IP Address
Management
Ethernet:
Encapsulation
Synchronous Point-to-Point Protocol (PPP)
Frame Relay
High-level Data Link Control (HDLC)
Serial encapsulation over RS-232, RS-449, X.21, V.35, and EIA-530
connections
802.1Q filtering and forwarding
Multilink Frame Relay
Multilink PPP
Traffic Management Policing and shaping
Class-based queuing with prioritization
Weighted random early detection (WRED)
Queuing by virtual LAN (VLAN), data link connection identifier (DLCI),
interface, or bundle
Security Network attack detection
Denial-of-service (DoS) and distributed DoS protection
Generic routing encapsulation (GRE), IP-in-IP, and IP Security (IPSec) tunnels
56-bit Data Encryption Standard (DES) and 168-bit 3DES encryption
MD5 and Secure Hash Algorigthm (SHA-1) authentication
Replay attack prevention
Stateful firewall packet filters
Voice Support Compressed Real-time Transport Protocol (CRTP)
High Availability Virtual Router Redundancy Protocol (VRRP)
Graceful restart according to IETF standards
Redundant interfaces
System Management JUNOScope network manager
Internet Group Management Protocol version 3 (IGMPv3)
Protocol Independent Multicast (PIM)
Distance Vector Multicast Routing Protocol (DVMRP)
Single-source multicast
Media access control (MAC) encapsulation
802.1p tagging
Introducing the J-series Services Router
Separate License
License required for
IPSec
License required
J-series Software Features and Licenses
5