Juniper J2300 User Manual page 475

Task
Configure the lower drop probability for
normal, non-PLP traffic.
Configure a queue fill level for the lower
non-PLP drop probability.
J-Web Configuration Editor
1.
Click Add new entry next to Drop
profiles.
2.
In the Profile name box, type
the name of the drop profile—for
example, af-normal.
3. Click Configure next to Interpolate.
4.
Click Add new entry next to
Drop probability.
5. In the Value box, type a number for
the first drop point—for example,
0.
6.
Click OK.
7. Click Add new entry next to
Drop probability again.
8. In the Value box, type a number for
the next drop point—for example,
100.
9.
Click OK.
1.
Click Add new entry next to Fill
level.
2. In the Value box, type a number for
the first fill level—for example, 95.
3. Click OK.
4.
In the Value box, type a number
for the next fill level—for example,
100.
5. Click OK three times.
Configuring CoS with DiffServ with a Configuration Editor
Configuring Class of Service with DiffServ
CLI Configuration Editor
Enter
edit drop-profiles af-normal interpolate
set drop-probability 0
set drop-probability 100
Enter
set fill-level 95
set fill-level 100
445