Chapter 4
Establishing Basic Connectivity
Basic Connectivity Terms
The JUNOS software is preinstalled on the Services Router. When the router is
powered on, it is ready to be configured. If the router does not have a configuration
from the factory or your service provider, you must configure the software to
establish basic connectivity.
If you are setting up a Services Router for the first time, you can use either J-Web
Quick Configuration or the JUNOS CLI configuration editor to configure basic
connectivity.
If you are setting up many Services Routers, autoinstallation can help automate the
installation process.
This chapter contains the following topics. For more information about basic
connectivity, see the JUNOS System Basics Configuration Guide.
Basic Connectivity Terms on page 47
Basic Connectivity Overview on page 48
Before You Begin on page 53
Configuring the Services Router with J-Web Quick Configuration on page 53
Configuring the Services Router with a Configuration Editor on page 58
Configuring Autoinstallation on page 65
Verifying Basic Connectivity on page 67
Before configuring basic connectivity, become familiar with the
terms defined in Table 19.
Basic Connectivity Terms
47