Configuring The Cli Environment - Juniper J2300 User Manual

J-series™ Services Router User Guide

Configuring the CLI Environment

You can configure the CLI environment for your current login session. Your
settings are not retained when you exit the CLI.
To display the current CLI settings, enter the
CLI complete-on-space set to on
CLI idle-timeout disabled
CLI restart-on-upgrade set to on
CLI screen-length set to 49
CLI screen-width set to 132
CLI terminal is 'vt100'
CLI is operating in enhanced mode
CLI working directory is '/cf/var/home/remote'
To change the CLI environment, use the
Possible completions:
Table 38 shows how you can change the CLI environment features.
Table 38: Configuring the CLI Environment
Environment Feature
Command completion
Your working directory
124
Using the Command-Line Interface
user@host> show cli
user@host> set cli ?
complete-on-space Set whether typing space completes current word
directory Set working directory
idle-timeout Set maximum idle time before login session ends
prompt Set CLI command prompt string
restart-on-upgrade Set whether CLI prompts to restart after software upgrade
screen-length Set number of lines on screen
screen-width Set number of characters on a line
terminal Set terminal type
CLI Command
set cli complete-on-space
(on | off)
set cli directory path 8
command:
show cli
operational mode command:
set cli
Default Setting
on—Pressing Tab or Spacebar
completes a command.
/cf/var/home/remote
Options
Set off to allow only
Tab for command
completion.
Set on to re-enable
Tab and Spacebar
for command
completion.
Replace path with the
directory you want to enter
when you log in to the
Services Router.