Juniper J2300 User Manual page 481

Table 177: Sample diffserv-cos-map Scheduler Mapping
mf-classifier Forwarding Class
be-class
ef-class
af-class
nc-class
To configure and apply scheduler maps for the Services Router:
1.
2.
3.
4.
Table 178: Configuring Scheduler Maps
Task
Navigate to the Class-of-service level in
the configuration hierarchy.
Configure a scheduler map for DiffServ
CoS.
Configure a best-effort forwarding class
and scheduler.
For CoS Traffic Type
Best-effort traffic
Expedited forwarding traffic
Assured forwarding traffic
Network control traffic
Navigate to the top of the configuration hierarchy in either the J-Web or CLI
configuration editor.
Perform the configuration tasks described in Table 178.
If you are finished configuring the network, commit the configuration.
To check the configuration, see "Verifying a DiffServ Configuration" on page
457.
J-Web Configuration Editor
In the configuration editor hierarchy,
select Class of service.
1. Click Add new entry next to
Scheduler maps.
2. In the Map name box, type the
name of the scheduler map—for
example, diffserv-cos-map.
1.
Click Add new entry next to
Forwarding class.
2. In the Class name box, type
the name of the previously
configured best-effort forwarding
class—be-class.
3.
In the Scheduler box, type
the name of the previously
configured best-effort
scheduler—be-scheduler.
4.
Click OK.
Configuring CoS with DiffServ with a Configuration Editor
Configuring Class of Service with DiffServ
diffserv-cos-map Scheduler
be-scheduler
ef-scheduler
af-scheduler
nc-scheduler
CLI Configuration Editor
From the top of the configuration
hierarchy, enter
edit class-of-service
Enter
edit scheduler-maps diffserv-cos-map
Enter
set forwarding-class be-class scheduler
be-scheduler
451