Juniper J2300 User Manual page 482

J-series™ Services Router User Guide
Task
Configure an expedited forwarding
class and scheduler.
Configure an assured forwarding class
and scheduler.
Configure a network control class and
scheduler.
Apply the scheduler map to an interface.
452
Configuring CoS with DiffServ with a Configuration Editor
J-Web Configuration Editor
1.
Click Add new entry next to
Forwarding class.
2.
In the Class name box, type
the name of the previously
configured expedited forwarding
class—ef-class.
3.
In the Scheduler box, type
the name of the previously
configured expedited forwarding
scheduler—ef-scheduler.
4. Click OK.
1. Click Add new entry next to
Forwarding class.
2. In the Class name box, type the
name of the previously configured
assured forwarding class—af-class.
3.
In the Scheduler box, type
the name of the previously
configured assured forwarding
scheduler—af-scheduler.
4.
Click OK.
1. Click Add new entry next to
Forwarding class.
2. In the Class name box, type the
name of the previously configured
network control class—nc-class.
3.
In the Scheduler box, type
the name of the previously
configured network control
scheduler—nc-scheduler.
4.
Click OK twice.
1. Click Add new entry next to
Interfaces.
2. In the Interface name box, type
the name of the interface—for
example, fe-0/0/0.
3.
In the Scheduler map box, type the
name of the previously configured
scheduler map—diffserv-cos-map.
4. Click OK.
CLI Configuration Editor
Enter
set forwarding-class ef-class scheduler
ef-scheduler
Enter
set forwarding-class af-class scheduler
af-scheduler
Enter
set forwarding-class nc-class scheduler
nc-scheduler
Enter
set interfaces fe-0/0/0 scheduler-map
diffserv-cos-map