Chapter 3
Installing and Connecting a Services
Router
Before You Begin
Make the appropriate preparations and verify the J-series equipment before
installing a J-series Services Router and connecting it to a power source and the
network.
This chapter contains the following topics:
Before You Begin on page 35
Unpacking the J-series Services Router on page 36
Installing the J2300 Services Router on page 37
Installing the J4300 or J6300 Services Router on page 40
Connecting Interface Cables to the Services Router on page 42
Chassis Grounding on page 42
Connecting Power to the Services Router on page 43
Powering a Services Router On and Off on page 44
Before you begin installation, complete the following tasks:
Read the information in "Maintenance and Operational Safety Guidelines
and Warnings" on page 588, with particular attention to "Chassis Lifting
Guidelines" on page 577.
Determine where to install the Services Router, and verify that the rack or
installation site meets the requirements described in "Preparing for Router
Installation" on page 541.
For installation, gather the equipment and tools listed in Table 17.
35
Before You Begin