Page 1 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Release 8.4 Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 408-745-2000 www.juniper.net Part Number: 530-020998-01, Revision 1...
Page 2 Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
Page 3 AND (B) YOU MAY CONTACT JUNIPER NETWORKS REGARDING LICENSE TERMS. 1. The Parties. The parties to this Agreement are Juniper Networks, Inc. and its subsidiaries (collectively “Juniper”), and the person or organization that originally purchased from Juniper or an authorized Juniper reseller the applicable license(s) for use of the Software (“Customer”) (collectively, the “Parties”).
Page 4 (“GPL”) or the GNU Library General Public License (“LGPL”)), Juniper will make such source code portions (including Juniper modifications, as appropriate) available upon request for a period of up to three years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194 N.
Page 5 Abbreviated Table of Contents About This Guide Part 1 J-series Overview Chapter 1 Overview of Services Routers Chapter 2 System Overview Chapter 3 PIM and VoIP Module Overview Chapter 4 Services Router User Interface Overview Part 2 Installing a Services Router Chapter 5 Preparing for Router Installation Chapter 6...
Page 6 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide...
Page 7: Table Of Contents
Table of Contents About This Guide Objectives ...xv Audience ...xv How to Use This Guide ...xvi Document Conventions ...xvii Related Juniper Networks Documentation ...xviii Documentation Feedback ...xxi Requesting Support ...xxi Part 1 J-series Overview Chapter 1 Overview of Services Routers J2320 Services Router Overview ...4...
Page 8 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide J2320 Power System ...24 J2350 Power System ...24 J2320 and J2350 Cooling System ...25 J4350 and J6350 Services Router Hardware Features ...26 J4350 and J6350 Chassis ...27 J4350 and J6350 Midplane ...31 J4350 and J6350 Routing Engine Hardware ...31 J4350 and J6350 Boot Devices ...31 J4350 and J6350 Front Panel ...32...
Page 9 TIM514 Analog Telephony Interface Module ...74 TIM521 BRI Telephony Interface Module ...75 Chapter 4 Services Router User Interface Overview User Interface Overview ...79 J-Web Overview ...79 CLI Overview ...80 Before You Begin ...80 Using the J-Web Interface ...81 Starting the J-Web Interface ...81 J-Web Layout ...82 Elements of the J-Web Interface ...83 Navigating the J-Web Interface ...85...
Page 10 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Power Guidelines, Requirements, and Specifications ...105 Site Electrical Wiring Guidelines ...106 Router Power Requirements ...106 AC Power, Connection, and Power Cord Specifications ...107 DC Power, Connection, and Power Cable Specifications ...108 Planning for Power Management ...110 Network Cable Specifications ...112 ISDN Provisioning ...112...
Page 11 Configuring Basic Settings with a Configuration Editor ...145 Verifying Basic Connectivity ...148 Displaying Basic Connectivity Configurations ...149 Chapter 8 Configuring Secure Web Access Secure Web Access Terms ...151 Secure Web Access Overview ...152 Before You Begin ...152 Generating SSL Certificates ...153 Configuring Secure Web Access ...153 Configuring Secure Web Access with a Configuration Editor ...156 Verifying Secure Web Access ...157...
Page 12 Chapter 11 Troubleshooting Hardware Components Chassis Alarm Conditions ...211 Troubleshooting Power Management ...212 Contacting the Juniper Networks Technical Assistance Center ...214 Chapter 12 Contacting Customer Support and Returning Hardware Locating Component Serial Numbers ...215 J2320 and J2350 Chassis Serial Number and Agency Labels ...216 J4350 and J6350 Chassis Serial Number and Agency Labels ...217...
Page 13 Part 4 J-series Requirements and Specifications Chapter 13 Network Cable Specifications and Connector Pinouts Serial PIM Cable Specifications ...225 RS-232 DTE Cable Pinout ...226 RS-232 DCE Cable Pinout ...227 RS-422/449 (EIA-449) DTE Cable Pinout ...227 RS-422/449 (EIA-449) DCE Cable Pinout ...229 EIA-530A DTE Cable Pinout ...230 EIA-530A DCE Cable Pinout ...231 V.35 DTE Cable Pinout ...232...
Page 14 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Installation Safety Guidelines and Warnings ...263 Laser and LED Safety Guidelines and Warnings ...269 Maintenance and Operational Safety Guidelines and Warnings ...273 Agency Approvals ...279 Compliance Statements for Environmental Requirements ...280 Lithium Battery ...280 Compliance Statements for EMC Requirements ...280 Canada ...281...
Page 15: About This Guide
Objectives on page xv Audience on page xv How to Use This Guide on page xvi Document Conventions on page xvii Related Juniper Networks Documentation on page xviii Documentation Feedback on page xxi Requesting Support on page xxi Objectives This guide contains an overview, basic instructions, and specifications for J2320, J2350, J4350, and J6350 Services Routers.
Page 16 JUNOS implementation specifically on J-series routers. (For comprehensive JUNOS information, see the JUNOS software manuals listed in “Related Juniper Networks Documentation” on page xviii.) Table 1 on page xvi shows the location of J-series information, by task type, in Juniper Networks documentation.
Page 17 For many J-series features, you can use J-Web Quick Configuration pages to configure the router quickly and easily without configuring each statement individually. For more extensive configuration, use the J-Web configuration editor or CLI configuration mode commands. To monitor, diagnose, and manage a router, use the J-Web interface or CLI operational mode commands.
Page 18 J-Web GUI Conventions Bold typeface > (bold right angle bracket) Related Juniper Networks Documentation J-series Services Routers are documented in multiple guides. Although the J-series guides provide instructions for configuring and managing a Services Router with the JUNOS CLI, they are not a comprehensive JUNOS software resource. For complete...
Page 19 JUNOS Interfaces Command Reference JUNOS Network Interfaces Configuration Guide JUNOS System Basics Configuration Guide JUNOS System Basics and Services Command Reference JUNOS Routing Protocols Configuration Guide JUNOS Routing Protocols and Policies Command Reference Related Juniper Networks Documentation About This Guide...
Page 20 “Configuring SNMP for Network Management” “Configuring the Router as a DHCP Server” “Configuring Autoinstallation” “Automating Network Operations and Troubleshooting” Related Juniper Networks Documentation Corresponding JUNOS Software Manual JUNOS MPLS Applications Configuration Guide JUNOS Routing Protocols and Policies Command Reference JUNOS VPNs Configuration Guide...
Page 21 Table 4: J-series Guides and Related JUNOS Software Publications (continued) Chapter in a J-series Guide “Monitoring the Router and Routing Operations” “Monitoring Events and Managing System Log Files” “Configuring and Monitoring Alarms” “Performing Software Upgrades and Reboots” “Using Services Router Diagnostic Tools” “Configuring Packet Capture”...
Page 22 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide xxii Requesting Support...
Page 23: J-Series Overview
Part 1 J-series Overview Overview of Services Routers on page 3 System Overview on page 13 PIM and VoIP Module Overview on page 43 Services Router User Interface Overview on page 79 J-series Overview...
Page 24 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide J-series Overview...
Page 25: Overview Of Services Routers
Quick Configuration wizards simplify basic configuration and minimize the risk of operator error. JUNOS command-line interface—A Juniper Networks command shell that runs on top of a UNIX-based operating system kernel. The CLI is a straightforward command interface. On a single line, you type commands that are executed when you press the Enter key.
Page 26 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide J2320 Services Router Overview The J2320 Services Router is primarily designed for remote or branch offices. It has a small chassis that is 1 U (rack unit) in size with a nonredundant AC power supply, an external compact flash and two universal serial bus (USB) ports for external storage, and an optional Crypto Accelerator Module.
Page 27 upgraded to 1 GB. For instructions on upgrading memory, see “Replacing DRAM Modules” on page 190. Each J2350 chassis contains four built-in Gigabit Ethernet ports with link speeds of 10/100/1000 Mbps over a copper interface. The chassis also contains five slots for field-replaceable Physical Interface Modules (PIMs) and Avaya VoIP modules providing flexible WAN and voice connectivity options.
Page 28 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Gigabit Ethernet uPIM (1-port, 6-port, 8-port, and 16-port) SFP Gigabit Ethernet ePIM (1 port) Copper Gigabit Ethernet ePIM (1 port) Dual-Port Serial PIM Dual-Port E1 PIM Dual-Port T1 PIM Dual-Port Channelized T1/E1/ISDN PRI PIM E3 PIM (1 port) DS3 (T3) PIM (1 port) Dual-Port Fast Ethernet PIM...
Page 29 Copper Gigabit Ethernet ePIM (1 port) ADSL 2/2+ Annex A PIM (1 port) ADSL 2/2+ Annex B PIM (1 port) Dual-Port E1 PIM E3 PIM (1 port) DS3 (T3) PIM (1 port) Dual-Port Fast Ethernet PIM Dual-Port Channelized T1/E1/ISDN PRI PIM 4-port Fast Ethernet ePIM G.SHDSL PIM (2 ports) 4-port ISDN BRI S/T or U PIM...
Page 30 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 5: Summary of J-series Features and License Requirements (continued) Feature Category J-series Feature Open Shortest Path First (OSPF) Routing and Multicast Border Gateway Protocol (BGP) Routing Information Protocol version 1 (RIPv1) and RIPv2 Static routes Intermediate System-to-Intermediate System (IS-IS) Connectionless Network Services (CLNS):...
Page 31 Table 5: Summary of J-series Features and License Requirements (continued) Feature Category J-series Feature Ethernet: Encapsulation Media access control (MAC) encapsulation 802.1p tagging Point-to-Point Protocol over Ethernet (PPPoE) Asynchronous Transfer Mode (ATM) for asymmetric digital subscriber line (ADSL) or symmetric high-speed digital subscriber line (SHDSL) Circuit cross-connect (CCC) Translational cross-connect (TCC) Synchronous Point-to-Point Protocol (PPP)
Page 32 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 5: Summary of J-series Features and License Requirements (continued) Feature Category J-series Feature Common Criteria Security Network attack detection Denial-of-service (DoS) and distributed DoS protection Generic routing encapsulation (GRE), IP-over-IP, and IP Security (IPSec) tunnels Advanced Encryption Standard (AES) 128-, 192-, and 256-bit.
Page 33 Table 5: Summary of J-series Features and License Requirements (continued) Feature Category J-series Feature System log Activity Logging and Monitoring J-Web event viewer Traceroute Supports the following external administrator databases: Administration RADIUS TACACS+ Autoinstallation Configuration rollback Button-operated configuration rescue (CONFIG) Confirmation of configuration changes Software upgrades Supports the following features for automating network operations and...
Page 34: J-Series Software Features And Licenses
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide J-series Software Features and Licenses...
Page 35: System Overview
Chapter 2 System Overview J-series J2320, J2350, J4350, and J6350 Services Routers have chassis that are similar but with important differences. J2320, J2350, and J4350 routers have a single nonredundant power supply and an optional Crypto Accelerator Module. J6350 routers have redundant power supplies and a standard Crypto Accelerator Module. For field-replaceable PIMs and Avaya VoIP modules, the J2320 has three slots, the J2350 has five slots, and the J4350 and J6350 have six slots.
Page 36: J2320 And J2350 Chassis
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide J2320 and J2350 Chassis The J2320 and J2350 chassis is a rigid sheet metal structure that houses all the other router components (see Figure 1 on page 14 through Figure 7 on page 17). The chassis can be installed in many types of racks or cabinets.
Page 37: J2320 And J2350 Services Router Hardware Features
Chapter 2: System Overview Figure 2: Front of J2350 Chassis Figure 3: Rear of J2320 Chassis Figure 4: Rear of J2350 AC-Powered Chassis J2320 and J2350 Services Router Hardware Features...
Page 38 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 5: Rear of J2350 DC-Powered Chassis Figure 6: J2320 Hardware Components J2320 and J2350 Services Router Hardware Features...
Page 39 Figure 7: J2350 Hardware Components Table 6 on page 17 summarizes the physical specifications for the router chassis. Table 6: J2320 and J2350 Physical Specifications Description Value Chassis dimensions J2320 Services Router 1.75 in. (4.45 cm) high 17.51 in. (44.48 cm) wide—18.9 in. (48.01 cm) wide with mounting brackets attached 15.1 in.
Page 40: J2320 And J2350 Midplane
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide J2320 and J2350 Midplane The J2320 and J2350 midplane is located in the center of the chassis and forms the rear of the PIM card cage (see Figure 6 on page 16 and Figure 7 on page 17). You install the PIMs into the midplane from the front of the chassis.
Page 41: Physical Interface Modules (Pims)
J2320 and J2350 Boot Devices J2320 and J2350 Services Routers can boot from three devices: Internal compact flash External compact flash (also known as the removable compact flash) USB storage device Normally, a J2320 or J2350 Services Router boots from the internal compact flash. If the internal compact flash fails, the router attempts to boot from the external compact flash if it is installed.
Page 42: Status Led
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide STATUS LED on page 21 ALARM LED on page 21 HA LED on page 22 RESET CONFIG Button on page 22 Built-In Gigabit Ethernet Ports on page 23 Console Port on page 23 AUX Port on page 23 USB Port on page 24 Physical Interface Modules (PIMs)
Page 43: Status Led
Table 7: J2320 and J2350 POWER LED Color State Green On steadily Blinking Unlit After the router is powered on, status indicators—such as LEDs on the front panel show chassis power supply is functioning normally. Ignore error indicators that appear during the first 60 seconds.
Page 44: Ha Led
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 9: J2320 and J2350 ALARM LED Color State On steadily Yellow On steadily Unlit For information about alarm conditions and corrective actions, see “Chassis Alarm Conditions” on page 211. For additional information, see the J-series Services Router Administration Guide.
Page 45: Built-In Gigabit Ethernet Ports
You can change the default behavior of the information, see the J-series Services Router Basic LAN and WAN Access Configuration Guide. Built-In Gigabit Ethernet Ports Four built-in Gigabit Ethernet ports provide LAN connections over copper interfaces to hubs, switches, local servers, and workstations. You can also designate an Ethernet port for management traffic.
Page 46: Usb Port
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide USB Port ports on the front panel of the router (see Figure 8 on page 19 and Figure 9 on page 19) accept a USB storage device or USB storage device adapter with a compact flash installed, as defined in the CompactFlash Specification published by the CompactFlash Association.
Page 47: J2320 And J2350 Cooling System
Chapter 2: System Overview The AC power supply has a single AC appliance inlet that requires a dedicated AC power feed. The DC power supply has a terminal block that provides a single DC input (–48 VDC and return) and requires a dedicated 15 A (–48 VDC) circuit breaker. The J2350 AC-powered or DC-powered chassis has a power switch and does not include a power LED.
Page 48: J4350 And J6350 Services Router Hardware Features
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 11: Airflow Through the J2320 Chassis Figure 12: Airflow Through the J2350 Chassis J4350 and J6350 Services Router Hardware Features This section contains the following topics: J4350 and J6350 Chassis on page 27 J4350 and J6350 Midplane on page 31 J4350 and J6350 Routing Engine Hardware on page 31 J4350 and J6350 Boot Devices on page 31...
Page 49 J4350 Power System on page 36 J6350 Power System on page 37 J4350 and J6350 Cooling System on page 38 J4350 and J6350 Chassis The J4350 and J6350 chassis is a rigid sheet metal structure that houses all the other router components (see Figure 13 on page 28 through Figure 18 on page 30).
Page 50 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 13: Front of J4350 and J6350 Chassis Figure 14: Rear of J4350 AC-Powered Chassis NOTE: The J4350 AC-powered chassis has a power switch and does not include a power supply LED (unlike the J6350 AC-powered chassis). Figure 15: Rear of J6350 AC-Powered Chassis J4350 and J6350 Services Router Hardware Features...
Page 51 Chapter 2: System Overview Figure 16: Rear of J4350 DC-Powered Chassis Figure 17: Rear of DC-Powered J6350 Chassis J4350 and J6350 Services Router Hardware Features...
Page 52 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 18: J4350 and J6350 Hardware Components Table 11 on page 30 summarizes the physical specifications for the router chassis. Table 11: J4350 and J6350 Physical Specifications Description Value Chassis dimensions 3.44 in.
Page 53 J4350 and J6350 Midplane The midplane is located in the center of the chassis and forms the rear of the PIM card cage (see Figure 18 on page 30). You install the PIMs into the midplane from the front of the chassis. Data packets are transferred across the midplane from the PIM to the Routing Engine, and from the Routing Engine across the midplane to the destination PIM.
Page 54: Physical Interface Modules (Pims)
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide J4350 and J6350 Front Panel The front panel of the Services Router (see Figure 19 on page 32) allows you to install or remove PIMs, view router status LEDs, access the console port, and perform simple control functions.
Page 55: Power Button And Power Led
Each J4350 and J6350 Services Router has six front panel slots for field-replaceable PIMs. These slots are numbered from top to bottom and from left to right as shown in the slot number diagram on the front panel, shown in Figure 20 on page 33. Figure 20: Slot Number Diagram on Front Panel Gigabit Ethernet and 4-port Fast Ethernet ePIMs can be installed in high-speed slots only.
Page 56: Status Led
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide STATUS LED When the system is powered on, the Startup takes approximately 90 seconds to complete. If you want to turn the system off and on again, we recommend waiting a few seconds between shutting it down and powering it back up.
Page 57: Ha Led
HA LED (high availability) LED is for future use. The LED lights when the router starts, but otherwise remains unlit. RESET CONFIG Button Use the RESET CONFIG or the factory default configuration. The button is recessed to prevent it from being pressed accidentally.
Page 58: Console Port
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 15: Gigabit Ethernet Port LEDs (continued) Function Color Green TX/RX Unlit Console Port You can use the console port on the chassis front panel to connect to the Routing Engine through an RJ-45 serial cable.
Page 59: J6350 Power System
The J4350 AC-powered chassis has a power switch and does not include a power LED. The J4350 DC-powered chassis includes a power supply LED located to the upper right of the power supply connector. Table 16 on page 37 describes the power supply LED.
Page 60: J4350 And J6350 Cooling System
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Power supplies on J6350 Services Routers are hot-removable and hot-insertable. You can remove and replace a redundant power supply without powering down the router or disrupting the routing functions. To avoid electrical injury, carefully follow the instructions in “Replacing Power System Components”...
Page 61: Software Overview
Figure 21: Airflow Through the J4350 and J6350 Chassis Software Overview Each J-series Services Router runs the JUNOS Internet software on its general-purpose processors. Designed for the large production networks typically supported by Internet service providers (ISPs), the JUNOS software includes processes for Internet Protocol (IP) routing and for managing interfaces, networks, and the router chassis.
Page 62 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Routing Engine and Packet Forwarding Engine A Services Router has two primary software processing components: Routing Engine—The Routing Engine provides three main functions: Creates the packet forwarding switch fabric for the Services Router, providing route lookup, filtering, and switching on incoming data packets, then directing outbound packets to the appropriate interface for transmission to the network.
Page 63: User Interfaces
Table 17: JUNOS Software Processes Process Name Management process Chassis chassisd process Routing protocol process Interface process (also called device control process) Forwarding fwdd process User Interfaces The user interfaces on a Services Router interact with the management process to execute commands and store and retrieve information from the configuration database.
Page 64 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide For more information, see “Services Router User Interface Overview” on page 79. Other user interfaces for the Services Router interact with the management process through the common API interface. These interfaces are designed to facilitate the configuration of one or, in some cases, many routers on the network.
Page 65: Pim And Voip Module Overview
Chapter 3 PIM and VoIP Module Overview J-series Services Routers accept Physical Interface Modules (PIMs) and Avaya VoIP modules in the slots on the front of the chassis. CAUTION: PIMs and VoIP modules are not hot-swappable. You must power off the Services Router before removing or inserting a PIM or VoIP module.
Page 66: Pim And Voip Module Terms
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide PIM and VoIP Module Terms To understand PIMs and VoIP modules, become familiar with the terms defined in Table 18 on page 44. Table 18: PIM and VoIP Module Terms Term Definition ADSL 2/2+ Annex A...
Page 67 Table 18: PIM and VoIP Module Terms (continued) Term Definition dialer filter Stateless firewall filter that enables dial-on-demand routing backup when applied to a physical ISDN interface and its dialer interface configured as a passive static route. The passive static route has a lower priority than dynamic routes. If all dynamic routes to an address are lost from the routing table and the router receives a packet for that address, the dialer interface initiates an ISDN backup connection and sends the packet over it.
Page 68: Field-Replaceable Pims
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Field-Replaceable PIMs PIMs are removable and insertable only when the Services Router is powered off. You can install a PIM into one of the slots in the router chassis. If a slot is not occupied by a PIM, a PIM blank panel must be installed to shield the empty slot and to allow cooling air to circulate properly through the router.
Page 69: J4350 And J6350 Field-Replaceable Pim Summary
NOTE: Although J2320 and J2350 Services Routers support PIMs that were introduced before the JUNOS 8.4 release, these routers do not support software releases earlier than JUNOS 8.4. Table 19: J2320 and J2350 Field-Replaceable PIM Summary Supported Software Releases for This PIM 1-Port SFP, 6-Port SFP, JUNOS 8.4 and later 8-Port, and 16-Port...
Page 70 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide NOTE: Although J4350 and J6350 Services Routers support PIMs that were introduced before the JUNOS 8.0 release, these routers do not support software releases earlier than JUNOS 8.0. Table 20: J4350 and J6350 Field-Replaceable PIM Summary Supported Software Releases for This PIM 1-Port SFP Gigabit...
Page 71: 1-Port, 6-Port, 8-Port, And 16-Port Gigabit Ethernet Upims
Table 20: J4350 and J6350 Field-Replaceable PIM Summary (continued) Supported Software Releases for This PIM T3 or E3 PIM JUNOS 8.0 and later Dual-Port Fast Ethernet JUNOS 8.0 and later 4-port Fast Ethernet JUNOS 8.0 and later ePIM PIM 4-Port ISDN BRI PIM JUNOS 8.0 and later ADSL PIM JUNOS 8.0 and later...
Page 72 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 22: 1-Port Gigabit Ethernet uPIM Figure 23: 6-Port Gigabit Ethernet uPIM The 8-port and 16-port Gigabit Ethernet uPIMs, shown in Figure 24 on page 50 and Figure 25 on page 50, have RJ-45 connectors. Figure 24: 8-Port Gigabit Ethernet uPIM Figure 25: 16-Port Gigabit Ethernet uPIM Field-Replaceable PIMs...
Page 73 Features. Gigabit Ethernet uPIMs provide the following key features: The multiport uPIMs can be used as switches in the access layer (for connections to workstations and desktops). For more information, see the J-series Services Router Basic LAN and WAN Access Configuration Guide. Link speed for 8-port and 16-port Gigabit Ethernet uPIMs is configurable to 10, 100, or 1000 Mbps, and transmission mode is configurable to half or full duplex.
Page 74 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 21: Gigabit Ethernet Port LEDs Function Link Activity (TX/RX) For alarms, see the configuring and monitoring alarms information in the J-series Services Router Administration Guide. Optical Interface Support. Table 22 on page 52 describes the optical interface support on the 1-port and 6-port Gigabit Ethernet uPIMs over single-mode fiber-optic (SMF) and multimode fiber-optic (MMF) cables.
Page 75 Figure 26: Copper Gigabit Ethernet ePIM Figure 27: SFP Gigabit Ethernet ePIM Features. The Gigabit Ethernet ePIM provides the following key features: Autonegotiation through medium-dependent interface (MDI) and MDI crossover (MDI-X) support. Link speeds for the Copper Gigabit Ethernet ePIM are configurable to 10, 100, or 1000 Mbps, and transmission mode is configurable to half or full duplex.
Page 76 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Limitations. The Gigabit Ethernet ePIM has the following limitations: Gigabit Ethernet ePIMs do not support SNMP. Configure Gigabit Ethernet ePIM interfaces up to a maximum MTU size of 9018 bytes. Installation.
Page 77 Table 24: Optical Interface Support for SFP Gigabit Ethernet ePIM (continued) Parameter Average launch power Receiver saturation Receiver sensitivity Dual-Port Serial PIM The Dual-Port Serial PIM (Figure 28 on page 55) provides a physical connection to serial network media types through two serial interface ports. Figure 28: Dual-Port Serial PIM The Dual-Port Serial PIM provides the following key features: Onboard network processor...
Page 78 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 25: Status LEDs for Serial Ports Color Green Unlit For alarms, see the configuring and monitoring alarms information in the J-series Services Router Administration Guide. Dual-Port T1 or E1 PIM The Dual-Port T1 PIM (Figure 29 on page 56) and Dual-Port E1 PIM (Figure 30 on page 56) provide a physical connection to T1 or E1 network media types.
Page 79 G.703, G.704, and G.706 E1 standards compliance Independent internal and external clocking system Loopback, bit error rate test (BERT), T1 facilities data link (FDL), and long buildout diagnostics For pinouts of cable connectors for T1 and E1 PIMs, see “E1 and T1 RJ-48 Cable Pinouts”...
Page 80 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 31: Channelized T1/E1/ISDN PRI PIM The Dual-Port Channelized T1/E1/ISDN PRI PIM provides the following key features: Onboard network processor Two-port channelization Interfaces that are software configurable as T1 or E1 channels or ISDN PRI B-channels Clear-channel, fractional, and channelized operation Lower latency due to the addition of a Freescale processor...
Page 81: T3 Or E3 Pim
Table 27: LEDs for Channelized T1/E1/ISDN PRI PIMs Label ONLINE STATUS For alarms, see the configuring and monitoring alarms information in the J-series Services Router Administration Guide. T3 or E3 PIM The T3 (also known as DS3) PIM (Figure 32 on page 59) and E3 PIM (Figure 33 on page 60) provide a physical connection to T3 or E3 network media types.
Page 82 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 33: E3 PIM The T3 and E3 PIMs provide the following key features: Onboard network processor Integrated DSU—Eliminates the need for a separate external device Subrate and scrambling options with support for major DSU vendors Independent internal and external clocking system Loopback (payload–supported only on T3 PIM, local, and remote), bit error rate test (BERT), and T3 far-end alarm and control (FEAC) diagnostics...
Page 83: Dual-Port Fast Ethernet Pim
Dual-Port Fast Ethernet PIM The Dual-Port 10/100-Mbps Fast Ethernet PIM (Figure 34 on page 61) has two physical Fast Ethernet ports. Figure 34: Fast Ethernet PIM The Dual-Port Fast Ethernet PIM provides the following key features: Onboard network processor Full-duplex and half-duplex modes Media access control (MAC) address filtering Autonegotiation through medium-dependent interface (MDI) and MDI crossover (MDI–X) support...
Page 84: 4-Port Fast Ethernet Epim
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide 4-Port Fast Ethernet ePIM You can install 4-Port Fast Ethernet ePIMs in any of the high-speed slots, as follows: J4350—Install up to two 4-Port Fast Ethernet ePIMs in slots 3 and 6. J6350—Install up to four 4-Port Fast Ethernet ePIMs in slots 2, 3, 5, and 6.
Page 85: 4-Port Isdn Bri Pims
Table 30: LEDs for 4-Port Fast Ethernet ePIM Label Color Link status (upper Green left) Unlit Link activity (upper Green right) Unlit For alarms, see the configuring and monitoring alarms information in the J-series Services Router Administration Guide. 4-Port ISDN BRI PIMs The 4-port ISDN BRI PIMs have four physical ports that support the ISDN BRI S/T (Figure 36 on page 63) or ISDN BRI U (Figure 37 on page 63) interface type.
Page 86: Adsl Pim
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Dial backup Dial-on-demand routing backup (floating static and dialer watch) For pinouts of cable connectors for ISDN PIMs, see “ISDN RJ-45 Connector Pinout” on page 241. To install or remove a PIM, see “Replacing a PIM” on page 174. ISDN LEDs indicate PIM and port status.
Page 87 Figure 38: ADSL 2/2+ Annex A PIM Figure 39: ADSL 2/2+ Annex B PIM The ADSL PIM provides the following key features: Onboard network processor ADSL, ADSL2, and ADSL2+ protocols on the same PIM “Dying gasp” notification Asynchronous Transfer Mode (ATM) Adaptation Layer 5 (AAL5) encapsulation For pinouts of cable connectors for ADSL PIMs, see “ADSL and G.SHDSL RJ-11 Connector Pinout”...
Page 88: G.shdsl Pim
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide For alarms, see the configuring and monitoring alarms information in the J-series Services Router Administration Guide. G.SHDSL PIM The G.SHDSL PIM (Figure 40 on page 66) provides symmetric high-speed digital subscriber line (SHDSL) physical interfaces to ATM network media types.
Page 89: Avaya Voip Modules
Table 33: LEDs for G.SHDSL PIMs Label Color Green ONLINE Unlit Green STATUS For alarms, see the configuring and monitoring alarms information in the J-series Services Router Administration Guide. Avaya VoIP Modules The Avaya VoIP modules are installed in a J-series chassis like Physical Interface Modules (PIMs), but they are controlled by the Avaya Communication Manager software rather than the JUNOS Internet software.
Page 90 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide CAUTION: Do not install a combination of PIMs in a single chassis that exceeds the maximum power and heat capacity of the chassis. If J-series power management is enabled, PIMs that exceed the maximum power and heat capacity remain offline when the chassis is powered on.
Page 91: Tgm550 Telephony Gateway Module
Table 35: J4350 and J6350 Avaya VoIP Module Summary Software Release for Also Called This PIM TGM550 TGM550 JUNOS 8.2 and later Telephony Gateway Gateway Module Module TGM550 TIM510 E1/T1 TIM510 JUNOS 8.2 and later Telephony E1/T1 media Interface module Module TIM510 TIM514...
Page 92 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 41: TGM550 Telephony Gateway Module The TGM550 provides the following key features: Voice VoIP Media Gateway services. Two analog telephone ( incoming analog direct inward dialing (DID) trunks with either wink start or immediate start.
Page 93 Table 36 on page 71 lists the maximum number of media servers, telephones, TIMs, and so on that are supported by the TGM550 installed on a J4350 or J6350 Services Router. Table 36: TGM550 Maximum Media Gateway Capacities Hardware or Feature TGM550s that can be controlled by an Avaya S8500 or S8700 Media Server TGM550s that can be controlled by an...
Page 94 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 36: TGM550 Maximum Media Gateway Capacities (continued) Hardware or Feature Digital signal processors (DSPs) Busy Hour Call Completion Rate (BHCC) Total of IP and analog telephones that can be connected to a TGM550 and TIMs Touch-tone recognition (TTR) Tone generation Announcements (VAL)
Page 95: Tim510 E1/T1 Telephony Interface Module
Table 37: LEDs for TGM550 Gateway Module (continued) Label Color Yellow Green Green For more information about the TGM550, see the Avaya manual Hardware Description and Reference for Avaya Communication Manager. TIM510 E1/T1 Telephony Interface Module The TIM510 E1/T1 Telephony Interface Module (Figure 42 on page 73), also known as the TIM510 E1/T1 media module, terminates an E1 or T1 trunk.
Page 96: Tim514 Analog Telephony Interface Module
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide TIM510 LEDs indicate link status and activity. Table 38 on page 74 describes the meaning of the LEDs. Table 38: LEDs for TIM510 Label Color Green Yellow Green For more information about the TIM510, see the Avaya manual Hardware Description and Reference for Avaya Communication Manager.
Page 97: Tim521 Bri Telephony Interface Module
Table 39: TIM514 Possible Port Configurations Possible Analog Telephone (LINE) Port Configurations Wink-start or immediate-start DID trunk Analog tip/ring devices such as single-line telephones with or without LED message-waiting indication The TIM514 also provides the following features: Three ringer loads, the ringer equivalency number for up to 2,000 ft (610 m), for all eight ports Up to four simultaneously ringing ports Type 1 caller ID and Type 2 caller ID...
Page 98 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide port has two B-channels plus a D-channel. Up to two TIM521s (with 4 BRI trunk ports each) can be installed in any of the slots on the Services Router. Figure 44: TIM521 BRI Telephony Interface Module For ISDN BRI trunking, the TIM521 supports up to four BRI interfaces to the central office at the ISDN T reference point.
Page 99 Chapter 3: PIM and VoIP Module Overview For more information about the TIM521, see the Avaya manual Hardware Description and Reference for Avaya Communication Manager. Avaya VoIP Modules...
Page 100 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Avaya VoIP Modules...
Page 101: User Interface Overview
Chapter 4 Services Router User Interface Overview You can use two user interfaces to monitor, configure, troubleshoot, and manage a Services Router—the J-Web interface and the JUNOS command-line interface (CLI). This chapter contains the following topics: User Interface Overview on page 79 Before You Begin on page 80 Using the J-Web Interface on page 81 Using the Command-Line Interface on page 89...
Page 102: Cli Overview
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Edit the configuration in a text file. Upload a configuration file. The J-Web interface also allows you to manage configuration history and set a rescue configuration. Diagnosing—Diagnose routing problems by running the ping or traceroute diagnostic tool.
Page 103: Using The J-Web Interface
Using the J-Web Interface This section contains the following topics: Starting the J-Web Interface on page 81 J-Web Layout on page 82 Elements of the J-Web Interface on page 83 Navigating the J-Web Interface on page 85 J-Web Sessions on page 88 For more information about using the J-Web interface, see the J-Web Interface User Guide.
Page 104: J-Web Layout
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide J-Web Layout Each page of the J-Web interface is divided into the following panes, as shown in Figure 45 on page 82. Top pane—Displays identifying information and links. Main pane—Location where you monitor, configure, diagnose, and manage the Services Router by entering information in text boxes, making selections, and clicking buttons.
Page 105: Elements Of The J-Web Interface
The top pane comprises the elements shown in Figure 46 on page 83. Figure 46: Top Pane Elements Juniper Networks logo—Link to hostname – model—Hostname and model of the Services Router. Logged in as: username—Username you used to log in to the Services Router.
Page 106: Main Pane Elements
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Main Pane Elements The main pane comprises the elements shown in Figure 47 on page 84. Figure 47: Main Pane Elements Help (?) icon—Displays useful information when you move the cursor over the question mark.
Page 107: Side Pane Elements
Side Pane Elements The side pane comprises the elements shown in Figure 48 on page 85. Figure 48: Side Pane Elements Subtask—Displays options related to the selected task in the J-Web taskbar. Configuration hierarchy—For the J-Web configuration editor, displays the hierarchy of committed statements in the Services Router configuration.
Page 108: Navigating The Quick Configuration Pages
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide from all pages, allowing you to skip from one task or subtask to the other from any page in the interface. The path displayed in the top right corner of each page provides a context. Use this path to see your location in a configuration hierarchy.
Page 109: Getting J-Web Help
Configuration, Diagnose, Manage, Events, and Alarms tasks. For Help on the View and Edit configuration tasks, see the related documentation provided in the “Related Juniper Networks Documentation” on page xviii. To get Help in the J-Web interface: Field-sensitive Help—Move the cursor over the question mark (?) next to the field for which you want more information.
Page 110: J-Web Sessions
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 49: CoS Help Page J-Web Sessions You establish a J-Web session with the Services Router through an HTTP-enabled or HTTPS-enabled Web browser. The HTTPS protocol, which uses 128-bit encryption, is available only in domestic versions of the JUNOS software.
Page 111: Using The Command-Line Interface
Using the Command-Line Interface This section contains the following topics: CLI Command Hierarchy on page 89 Starting the CLI on page 90 CLI Operational Mode on page 90 CLI Configuration Mode on page 91 CLI Basics on page 92 For more information about the CLI, see the JUNOS CLI User Guide. CLI Command Hierarchy The CLI commands are organized hierarchically, with commands that perform a similar function grouped together under the same level.
Page 112 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide intervening space), you see a list of commands that match the partial name you typed. Starting the CLI To start the CLI: Establish a connection with the Services Router: To access the router remotely from the network, enter the command you typically use to establish a remote connection (such as the router hostname.
Page 113: Cli Configuration Mode
show start telnet test traceroute At the top level of operational mode are a number of broad groups of CLI commands that are used to perform the following functions: Control the CLI environment. Monitor and troubleshoot the router. Connect to other systems. Manage files and software images.
Page 114: Cli Basics
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide insert load quit rename rollback save show status wildcard The JUNOS software configuration consists of a hierarchy of statements. There are two types of statements: container statements, which contain other statements, and leaf statements, which do not contain other statements.
Page 115 Table 44: CLI Editing Keystrokes Task Category Action Move the cursor. Move the cursor back one character. Move the cursor back one word. Move the cursor forward one character. Move the cursor forward one word. Move the cursor to the end of the command line. Delete characters.
Page 116 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide To complete a command or option that you have partially typed, press Tab or Spacebar. If the partially typed letters uniquely identify a command, the complete command name appears. Otherwise, a message indicates that your entry is ambiguous or invalid.
Page 117 When you enter the displays usage guidelines and summary information for configuration statements and operational mode commands. You can enter configuration mode. Table 45: help Commands CLI Command help apropos string help reference string help topic string Configuring the CLI Environment You can configure the CLI environment for your current login session.
Page 118 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide user@host> set cli ? Possible completions: complete-on-space directory idle-timeout prompt restart-on-upgrade screen-length screen-width terminal Table 46 on page 96 shows how you can change the CLI environment features. Table 46: Configuring the CLI Environment Environment CLI Command Feature...
Page 119 Table 46: Configuring the CLI Environment (continued) Environment CLI Command Feature Number of CLI set cli screen-width characters displayed width on a line Your terminal type. set cli terminal terminal-type Chapter 4: Services Router User Interface Overview Default Setting Options Variable (depends on terminal type).
Page 120 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Using the Command-Line Interface...
Page 121: Installing A Services Router
Part 2 Installing a Services Router Preparing for Router Installation on page 101 Installing and Connecting a Services Router on page 115 Establishing Basic Connectivity on page 129 Configuring Secure Web Access on page 151 Installing and Managing J-series Licenses on page 161 Installing a Services Router...
Page 122 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Installing a Services Router...
Page 123: Preparing For Router Installation
Chapter 5 Preparing for Router Installation Before installing a J-series Services Router, make sure that your site has the proper operating environment and equipment. Use the checklist at the end of the chapter to help you prepare your site. This chapter discusses the following topics: General Site Guidelines on page 101 Rack Requirements on page 102 Router Environmental Tolerances on page 104...
Page 124: Rack Requirements
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Rack Requirements J-series Services Routers must be installed in a rack. Many types of racks are acceptable, including front-mount racks, four-post (telco) racks, and center-mount racks. The following sections describe rack requirements: Rack Size and Strength for J2320 and J2350 Routers on page 102 Rack Size and Strength for J4350 and J6350 Routers on page 103 Connection to Building Structure on page 103...
Page 125 The J2320 chassis height of 1.75 in. (4.45 cm) equals 1 U. The J2350 chassis height of 2.61 in. (6.63 cm) equals 1.5 U. Each U is a standard rack unit defined in Cabinets, Racks, Panels, and Associated Equipment (document number EIA-310-D) published by the Electronics Industry Association.
Page 126: Router Environmental Tolerances
In addition, establish procedures to protect your equipment in the event of a fire emergency. Juniper Networks products must be installed in an environment suitable for electronic equipment. We recommend that fire suppression equipment be available...
Page 127: Fire Suppression Equipment
NOTE: To keep warranties effective, do not use a dry chemical fire extinguisher to control a fire at or near a Juniper Networks router. If a dry chemical fire extinguisher is used, the unit is no longer eligible for coverage under a service agreement.
Page 128: Signaling Limitations
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Site Electrical Wiring Guidelines WARNING: DC-powered J2350, J4350, and J6350 Services Routers are intended for installation only in a restricted access location. When planning the electrical wiring at your site, consider the factors discussed in the following sections.
Page 129: Ac Power, Connection, And Power Cord Specifications
Table 48: AC and DC Power System Electrical Specifications for J2320 and J2350 Routers Item Specification AC input voltage 100 to 240 VAC nominal AC input line frequency 50 to 60 Hz AC system current rating J2320 Services Routers: 3.2 A to 1.3 A J2350 Services Routers: 3.5 A to 1.5 A DC input voltage –48 to –60 VDC operating range...
Page 130: Dc Power, Connection, And Power Cable Specifications
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 50 on page 108 lists AC power cord specifications provided for each country or region. Table 50: AC Power Cord Specifications Country Electrical Specifications Australia 250 VAC, 10 A, 50 Hz China 250 VAC, 10 A, 50 Hz Europe (except Italy and...
Page 131 J2350 routers—minimum 15 A (–48 VDC) J4350 and J6350 routers—minimum 25 A (–48 VDC) If the J6350 router contains redundant DC power supplies, one power supply must be powered by a dedicated power feed derived from feed supply must be powered by a dedicated power feed derived from feed configuration provides the commonly deployed Most sites distribute DC power through a main conduit that leads to frame-mounted DC power distribution panels, one of which might be located at the top of the rack...
Page 132: Planning For Power Management
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Planning for Power Management Before you install a chassis or add a new PIM to an existing chassis, verify that the combination of PIMs to be installed does not exceed the power and heat capacities for that model.
Page 133 Table 51: J-series PIM Power Consumption and Heat Dissipation (continued) Name Model Number Dual-Port E1 PIM JX-2E1-RJ48-S Dual-Port T1 PIM JX-2T1-RJ48-S Dual-Port JX-2CT1E1-RJ45-S Channelized T1/E1/ISDN PRI E3 PIM (1 port) JX-1E3-S T3 PIM (also JX-1DS3-S known as DS3) Dual-Port Fast JX-2FE-TX-S Ethernet PIM 4-Port Fast...
Page 134: Network Cable Specifications
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 52 on page 112 lists the maximum power tokens and maximum heat tokens available for each model. Table 52: Maximum Power and Heat Capacities of J-series Models Model J2320 J2350 J4350 J6350...
Page 135 Chapter 5: Preparing for Router Installation Table 53: Site Preparation Checklist (continued) Item or Task Performed By Date Notes Plan the rack location, including required space clearances. Secure the rack to the floor and the building structure. Acquire appropriate cables and connectors. Site Preparation Checklist...
Page 136 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Site Preparation Checklist...
Page 137: Installing And Connecting A Services Router
Chapter 6 Installing and Connecting a Services Router Make the appropriate preparations and verify the J-series equipment before installing a J-series Services Router and connecting it to a power source and the network. CAUTION: Do not install a combination of PIMs in a single chassis that exceeds the maximum power and heat capacity of the chassis.
Page 138 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide For J2320 and J2350 Routers—Number 2 Phillips screwdriver, and mounting screws appropriate for your rack. For J4350 and J6350 Routers—Mounting brackets and screws (provided), number 2 Phillips screwdriver, and mounting screws appropriate for your rack.
Page 139 Installing J2320 and J2350 Routers WARNING: DC-powered Services Routers are intended for installation only in a restricted access location. You can center-mount or front-mount the J2320 and J2350 Services Routers in a rack. In general, a center-mount rack is preferable to a front-mount rack because the more even distribution of weight in the center-mount rack provides greater stability.
Page 140: Installing J4350 And J6350 Routers
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Align the top hole in each mounting bracket with a hole in each rack rail as shown in Figure 53 on page 118 and Figure 54 on page 118, making sure the chassis is level.
Page 141 You can center-mount or front-mount the J4350 and J6350 Services Routers in a rack. In general, a center-mount rack is preferable to a front-mount rack because the more even distribution of weight in the center-mount rack provides greater stability. Many types of racks are acceptable, including four-post (telco) racks, enclosed cabinets, and open-frame racks.
Page 142 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 56: Attaching Center Screw to the Rack Lift the router and insert the larger elliptical openings in the mounting brackets onto the partially inserted screws so that the router is hanging from the two screws (see Figure 57 on page 120).
Page 143: Chassis Grounding
Figure 58: Completing the Installation Connecting Interface Cables to Services Routers You connect the interfaces installed in the Services Router to various network media. For more information about the network interfaces supported on the router, see the J-series Services Router Basic LAN and WAN Access Configuration Guide. Have ready a length of the type of cable used by the interface, as specified in “Network Cable Specifications and Connector Pinouts”...
Page 144: Connecting Power
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide For J2320 and J2350 Services Routers—The grounding cables must be, at minimum, 14 AWG single-strand wire cable. The grounding lug must be a ring-type, vinyl-insulated TV14-8R lug as shown in Figure 59 on page 123 and Figure 60 on page 124.
Page 145 With a Phillips screwdriver, remove the screw and washer from the PEM nuts at the grounding point on the rear of the chassis. Place the grounding lug at the other end of the cable over the grounding point, as shown in Figure 59 on page 123 through Figure 61 on page 124. Secure the cable lug to the grounding point, first with the washer, then with the screw.
Page 146: Connecting Dc Power
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 60: Connecting AC Power to the J2350 Services Router Figure 61: Connecting AC Power to the J4350 or J6350 Services Router Connecting DC Power CAUTION: If your J6350 Services Router includes an optional redundant DC power supply, connect each of the two power supplies to different input power sources.
Page 147 Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to the ESD point on the chassis. For more information about ESD, see “Preventing Electrostatic Discharge Damage” on page 249. Use a grounding cable to connect the router to earth ground: (For cable requirements, see “Chassis Grounding”...
Page 148 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide overtighten. Apply between 8 lb-in. (0.9 Nm) and 9 lb-in. (1.02 Nm) of torque to the screw. Using the other removed screw, secure the negative (–) DC source power cable lug to the overtighten.
Page 149: Powering A Services Router On And Off
Figure 63: Connecting DC Power to the J4350 or J6350 Services Router Powering a Services Router On and Off To power on a Services Router, press the power button. The Routing Engine boots as the power supply completes its startup sequence. The startup and remains on steadily when the router is operating normally.
Page 150 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Powering a Services Router On and Off...
Page 151: Chapter 7 Establishing Basic Connectivity
Chapter 7 Establishing Basic Connectivity The JUNOS software is preinstalled on the Services Router. When the router is powered on, it is ready to be configured. If the router does not have a configuration from the factory or your service provider, you must configure the software to establish basic connectivity.
Page 152: Router Identification
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 54: Basic Connectivity Terms (continued) Term Dynamic Host Configuration Protocol (DHCP) gateway hostname loopback address Network Time Protocol (NTP) root user secure shell (SSH) Telnet Basic Connectivity Overview To connect your Services Router to the network and establish basic connectivity, you enter information about your network.
Page 153 among all the devices in a given network. Together the hostname and domain name identify the router in the network. Root Password The root user has complete privileges to configure the Services Router, and manage files in the router's file system. Initially, the root password is not defined on the router.
Page 154: Network Settings
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Network Settings A Domain Name System (DNS) server on the network maintains a database for resolving hostnames and IP addresses. Network devices can query the DNS server by hostnames rather than IP addresses. The router accesses the DNS servers that are added to the configuration to resolve hostnames in the order in which you list them.
Page 155: Built-In Ethernet Interface Address
Built-In Ethernet Interface Address The built-in Gigabit Ethernet interfaces, panel of the Services Router, are the interfaces through which you perform initial router setup. The examples in this guide use the management interface, but you can use any built-in Ethernet port for management. After the initial configuration is complete, you can attach the built-in Ethernet port that you are using for management purposes to the management network.
Page 156: Before You Begin
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide TCP connection without using any additional protocol (such as SSH, SSL, or Telnet). Information sent in clear text is not encrypted and therefore can be intercepted. For more information about the JUNOScript application programming interface (API), see the JUNOScript API Guide.
Page 157: Connecting To A Services Router
An Ethernet cable (provided) If you are performing the initial configuration with the CLI, collect the following equipment: A management device, such as a PC or laptop, with a serial port and an asynchronous terminal application (such as Microsoft Windows Hyperterminal) An RJ-45 to DB-9 serial port adapter (provided) An Ethernet cable (provided)
Page 158 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Connect the other end of the Ethernet cable to the built-in Ethernet port on the router. Power on the router by pressing the power button on the front panel. Wait until the Turn on the power to the management device.
Page 159 Figure 65: Connecting to the Gigabit Ethernet Port on J4350 and J6350 Routers Connecting to the CLI Locally If you plan to use the CLI to configure the router, you must connect through the console port, as shown in Figure 66 on page 138 and Figure 67 on page 139. NOTE: Figure 66 on page 138 and Figure 67 on page 139 show a connection to a local management device.
Page 160 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Configure the port settings as follows: Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: None Power on the router by pressing the power button on the front panel. Verify that POWER The terminal emulation screen on your management device displays the boot sequence.
Page 161: Configuring The Modem At The Router End
Figure 67: Connecting to the Console Port on J4350 and J6350 Routers Connecting to the CLI Remotely You can connect to the CLI from a remote location through two dial-up modems: a modem that is connected to the console port on the Services Router and a second modem connected to a remote management device.
Page 162 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide From the PC or laptop computer, start your asynchronous terminal emulation application (such as Microsoft Windows Hyperterminal) and select the to which the modem is connected (for example, Configure the port settings as follows: Bits per second: 9600 Data bits: 8 Parity: None...
Page 163: Connecting To The Cli At The User End
Connecting to the CLI at the User End To remotely connect to the CLI through a dial-up modem connected to the console port on the router: At your remote location, connect a modem to a management device such as a PC or laptop computer.
Page 164 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 68: Set Up Quick Configuration Page Before you configure the router, gather the information described in “Before You Begin” on page 134. To configure basic settings with J-Web Quick Configuration: If you have not already done so, connect a management device to the interface on port 0/0.
Page 165 To cancel your entries and return to the Quick Configuration page, click Cancel. NOTE: After initial configuration is complete, the Services Router stops functioning as a DHCP server. If you change the IP address of device configured to use DHCP, you lose your DHCP lease and your connection to the router through the J-Web interface.
Page 166 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 55: Set Up Quick Configuration Summary (continued) Field Function Current System Time Synchronizes the system time with the NTP server, or manually set the system time and date. Network DNS Name Servers Specify a DNS server that the router can use to resolve hostnames into addresses.
Page 167: Configuring Basic Settings With A Configuration Editor
Configuring Basic Settings with a Configuration Editor To establish basic connectivity on a Services Router, you identify the router, connect the router to the network, and specify basic network settings. In a typical network, the Services Router has the basic settings listed in Table 56 on page 145.
Page 168 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide If you are using the J-Web interface, click Commit to view a summary of your changes, then click OK to commit the configuration. If you are using the CLI, commit the configuration by entering the To check the configuration, see Displaying Basic Connectivity Configurations on page 149.
Page 169 Table 57: Configuring Basic Settings (continued) Task J-Web Configuration Editor Define the NTP server that In the Nested configuration section, next to Ntp, click NTP requests can be sent Configure or Edit. Next to Server, click Add New Entry. In the Address box, type the NTP server's IP address—for example, Click OK.
Page 170: Verifying Basic Connectivity
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 57: Configuring Basic Settings (continued) Task J-Web Configuration Editor Define the IP address for In the configuration editor hierarchy, next to Interfaces, click Configure or Edit. ge-0/0/0 In the Interface table, locate the click Unit.
Page 171: Displaying Basic Connectivity Configurations
Displaying Basic Connectivity Configurations Verify the configuration of basic connectivity. Because the basic connectivity settings Purpose appear in different places in the configuration hierarchy, displaying the entire configuration at once makes viewing the settings easier. From the J-Web interface, select Action Configuration>View and Edit>View Configuration Text.
Page 172 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Displaying Basic Connectivity Configurations...
Page 173: Configuring Secure Web Access
Chapter 8 Configuring Secure Web Access You can manage a Services Router remotely through the J-Web interface. To communicate with the router, the J-Web interface uses Hypertext Transfer Protocol (HTTP). HTTP allows easy Web access but no encryption. The data that is transmitted between the Web browser and the router by means of HTTP is vulnerable to interception and attack.
Page 174: Before You Begin
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 58: Secure Web Access Terms (continued) Term Definition Hypertext Transfer Protocol similar to HTTP with an added encryption layer that encrypts and decrypts Protocol over Secure user page requests and pages that are returned by a Web server. HTTPS is used for Sockets Layer (HTTPS) secure communication, such as payment transactions.
Page 175: Generating Ssl Certificates
Obtain an SSL certificate from a trusted signing authority. See “Generating SSL Certificates” on page 153. Generating SSL Certificates To enable secure Web access, you must first generate a digital SSL certificate, and then enable HTTPS access on the Services Router. To generate an SSL certificate: Enter the following interface.
Page 176 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 69: Quick Configuration Secure Access Page To configure Web access settings in the J-Web interface: Enter information into the Secure Access Quick Configuration page, as described in Table 59 on page 155. Click one of the following buttons: To apply the configuration and stay on the Quick Configuration page, click Apply.
Page 177 To verify that Web access is enabled correctly, connect to the router using one of the following methods: For HTTP access—In your Web browser, type For HTTPS access—In your Web browser, type address For SSL JUNOScript access—A JUNOScript client such as JUNOScope is required.
Page 178: Configuring Secure Web Access With A Configuration Editor
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 59: Secure Access Quick Configuration Summary (continued) Field Function Enable HTTPS on All Enables HTTPS on all interfaces at one Interfaces time. HTTPS-Enabled Allows you to specify interfaces on which Interfaces you want to enable HTTPS access.
Page 179: Verifying Secure Web Access
Table 60: Configuring a Secure Web Access (continued) Task J-Web Configuration Editor Import the SSL certificate Next to Certificates, click Configure. that you have Next to Local, click Add new entry. generated—for example, In the Name box, type a name for the certificate to be imported—for example, For information about generating SSL certificates,...
Page 180 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Displaying an SSL Certificate Configuration Display the SSL certificate configuration. Purpose From the J-Web interface, select Action Configuration>View and Edit>View Configuration Text. Alternatively, from configuration mode in the CLI, enter the The following sample output displays an SSL certificate generated with instructions in “Generating SSL Certificates”...
Page 181 Displaying a Secure Access Configuration Verify the secure access configuration. Purpose From the J-Web interface, select Action Configuration>View and Edit>View Configuration Text. Alternatively, from configuration mode in the CLI, enter the The following sample output displays the sample values for secure Web access as configured in Table 60 on page 156.
Page 182 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Displaying a Secure Access Configuration...
Page 183: Installing And Managing J-Series Licenses
Chapter 9 Installing and Managing J-series Licenses To enable some JUNOS software features on a J-series Services Router, you must purchase, install, and manage separate software licenses. The presence on the router of the appropriate software license keys (passwords) determines the features you can configure and use.
Page 184: Before You Begin
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 61: J-series Services Router Software Feature Licenses (continued) Licensed Software Feature Data link switching (DLSw) on all J-series Services Routers Traffic Analysis J-Flow traffic analysis—all configuration statements within the [edit forwarding-options sampling] [edit forwarding-options accounting]...
Page 185: Managing J-Series Licenses With The J-Web Interface
Managing J-series Licenses with the J-Web Interface To manage licenses with the J-Web interface, you perform the following tasks: Adding New Licenses with the J-Web Interface on page 164 Deleting Licenses with the J-Web Interface on page 165 Displaying License Keys with the J-Web Interface on page 165 Downloading Licenses with the J-Web Interface on page 165 Figure 70 on page 163 shows the J-Web Licenses page.
Page 186 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 62: Summary of License Management Fields (continued) Field Name Definition Feature Name of the licensed feature: Licenses Used Number of licenses currently being used on the router. Usage is determined by the configuration on the router.
Page 187: Managing J-Series Licenses With The Cli
Deleting Licenses with the J-Web Interface To delete one or more license keys from a Services Router with the J-Web license manager: In the J-Web interface, select Manage>Licenses. Select the check box of the license or licenses you want to delete. Click Delete.
Page 188 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Enter operational mode in the CLI. Enter one of the following CLI commands: To add a license key from a file or URL, enter the following command, specifying the filename or the URL where the key is located: To add a license key from the terminal, enter the following command: When prompted, enter the license key, separating multiple license keys with a blank line.
Page 189: Verifying J-Series License Management
Chapter 9: Installing and Managing J-series Licenses Verifying J-series License Management To verify J-series license management, perform these tasks: Displaying Installed Licenses on page 168 Displaying License Usage on page 169 Displaying Installed License Keys on page 169 Verifying J-series License Management...
Page 190 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Displaying Installed Licenses Verify that the expected licenses are installed and active on the Services Router. Purpose From the CLI, enter the Action user@router> show system license License usage: Feature name j-flow bgp-reflection dlsw...
Page 191 Displaying License Usage Verify that the licenses fully cover the feature configuration on the Services Router. Purpose From the CLI, enter the Action user@router> show system license usage Feature name j-flow bgp-reflection dlsw The output shows a list of the licenses installed on the Services Router and how they What It Means are used.
Page 192 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Displaying Installed License Keys...
Page 193: Maintaining Services Router Hardware
Part 3 Maintaining Services Router Hardware Replacing Hardware Components on page 173 Troubleshooting Hardware Components on page 211 Contacting Customer Support and Returning Hardware on page 215 Maintaining Services Router Hardware...
Page 194 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Maintaining Services Router Hardware...
Page 195: Replacing Hardware Components
Chapter 10 Replacing Hardware Components Because many of the Services Router's hardware components are field-replaceable units (FRUs), you can remove and replace them yourself. When you need to replace a router component, contact your customer support or sales representative to order the field-replaceable unit (FRU) that contains the component.
Page 196: Replacing A Pim
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 63: Tools and Parts Required Tool or Part Electrostatic bag or antistatic mat Electrostatic discharge (ESD) grounding wrist strap Flat-blade screw-blade screwdriver, approximately 1/4 in. (6 mm) Phillips (+) screwdriver, number 1 and number 2 Replacing the Console Port Cable The RJ-45 port labeled...
Page 197 CAUTION: Do not hot-swap PIMs. Failure to power off the router before removing or installing a PIM might result in damage to the hardware. Figure 71: Removing a PIM To remove a PIM (see Figure 71 on page 175): Place an electrostatic bag or antistatic mat on a flat, stable surface to receive the PIM.
Page 198: Routers
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Installing a PIM CAUTION: Do not hot-swap PIMs. Failure to power off the router before removing or installing a PIM might result in damage to the hardware. Figure 72: Installing a PIM CAUTION: Do not install a combination of PIMs in a single chassis that exceeds the maximum power and heat capacity of the chassis.
Page 199: Replacing Pim Cables
If necessary, arrange the cables to prevent them from dislodging or developing stress points: Secure each cable so that it is not supporting its own weight as it hangs to the floor. Place excess cable out of the way in a neatly coiled loop. Use fasteners to maintain the shape of cable loops.
Page 200: Removing And Replacing The Chassis Cover On J2320 And J2350 Routers
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Arrange the cable as necessary to prevent it from dislodging or developing stress points: Secure the cable so that it is not supporting its own weight as it hangs to the floor.
Page 201 With a Phillips screwdriver remove the flat head screws from the rear and sides of the chassis. Position the router so that you face the front panel. Place your hands on the cover and press down while pushing the cover back until the two front tabs disengage from the chassis base (see Figure 73 on page 179).
Page 202: Replacing Internal Compact Flashes On J2320 And J2350 Routers
For information about configuring the internal compact flash, see the J-series Services Router Administration Guide. NOTE: Use only compact flash cards purchased from Juniper Networks for your J-series platform and model. Replacing Internal Compact Flashes on J2320 and J2350 Routers...
Page 203 Figure 76: Location of J2320 and J2350 Internal Compact Flash To replace the internal compact flash: Place an electrostatic bag or antistatic mat on a flat, stable surface. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis, or to an outside ESD point if the router is disconnected from earth ground.
Page 204 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 77: Removing the J2320 or J2350 Internal Compact Flash Place the compact flash on the antistatic mat or in the electrostatic bag. With the vendor name and memory size facing up and the arrow pointing towards the router, insert the new compact flash into the compact flash slot (see Figure 78 on page 182).
Page 205: Replacing Internal Compact Flashes On J4350 And J6350 Routers
The internal compact flash is installed in a slot on the bottom of the J4350 or J6350 chassis (see Figure 79 on page 183). NOTE: Use only compact flash cards purchased from Juniper Networks for your J-series platform and model.
Page 206 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 80: Alternative Horizontal Orientation of J4350 and J6350 Compact Flash To replace the compact flash: Place an electrostatic bag or antistatic mat on a flat, stable surface. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis, or to an outside ESD point if the router is disconnected from earth ground.
Page 207 Figure 81: Removing the J4350 or J6350 Compact Flash Place the compact flash on the antistatic mat or in the electrostatic bag. Slide the new compact flash into the slot and press down, as shown in Figure 82 on page 185. Figure 82: Inserting the J4350 or J6350 Compact Flash NOTE: On some Services Routers the compact flash is in a horizontal position.
Page 208: Replacing External Compact Flashes
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Replace the power cord or cable. Press and release the power button to power on the router. Verify that the LED lights steadily. Replacing External Compact Flashes The external compact flash is an optional component on J2320 and J2350 Services Routers.
Page 209 Skip this step, if the router did not boot from the external compact flash (see step 1). With a Phillips screwdriver, loosen the pan head screws that secure the external compact flash cover to the rear of the chassis (see Figure 83 on page 187). Figure 83: Removing the External Compact Flash Cover Remove the compact flash cover.
Page 210: Replacing Usb Storage Devices
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Tighten the pan head screws that secures the compact flash slot cover to the rear of the chassis. Plug the power cord into the power supply. Press and release the power button to power on the router. Verify that the LED lights steadily.
Page 211 Verify the device that the router used to boot, by running the command from the CLI. For example: user@host> show system storage Filesystem /dev/ad0s1a The boot device is mounted on The external compact flash is located at flash. If the external compact flash, you need to power off the router before replacing the compact flash.
Page 212: Replacing Dram Modules
DRAM modules. Installing DRAM modules in slots away from each other provides better performance than installing them in two adjacent slots. NOTE: Use only DRAM modules purchased through Juniper Networks specifically for your model. Figure 86: J2320 and J2350 DRAM Location...
Page 213: Removing A Dram Module
Figure 87: J4350 and J6350 DRAM Location To modify the DRAM configuration, use the following procedures: Removing a DRAM Module on page 191 Installing a DRAM Module on page 192 Removing a DRAM Module To remove a DRAM module: Place an electrostatic bag or antistatic mat on a flat, stable surface. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis, or to an outside ESD point if the router is disconnected from earth ground.
Page 214 Installing a DRAM Module J2320, J2350, J4350 and J6350 Services Routers support 256-MB and 512-MB DRAM modules. Use only DRAM modules purchased from Juniper Networks specifically for your model. NOTE: If you are installing a second DRAM module, do not install it in a slot adjacent to the first module.
Page 215: Replacing Power System Components
Pressing firmly on both ends, push the module into the slot until the ejectors click into the closed position (see Figure 88 on page 192). Slide the cover onto the chassis. Replace and tighten the screws on the sides and top of the chassis that secure the cover to the chassis.
Page 216 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Locate a replacement power cord with the type of plug appropriate for your geographical location (see “AC Power, Connection, and Power Cord Specifications” on page 107). Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis, or to an outside ESD point if the router is disconnected from earth ground.
Page 217 NOTE: If the power supply is a redundant power supply in a J6350 Service Router, you can leave the router powered on and power flowing in the other power supply. Unplug the power cord from the power source receptacle. Unplug the power cord from the appliance inlet on the power supply faceplate. Slide the ejector tab on the power supply faceplate to the right and hold it in place to unlock the power supply.
Page 218 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide NOTE: Each power supply must be connected to a dedicated AC power feed. For information about connecting to AC power sources, see “Connecting Power” on page 122. Verify that the power cord does not block access to router components or drape where people might trip on it.
Page 219 CAUTION: You must ensure that power connections maintain the proper polarity. The power source cables might be labeled is no standard color coding for DC power cables. The color coding used by the external DC power source at your site determines the color coding for the leads on the power cables that attach to the terminal studs on each power supply.
Page 220 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide CAUTION: You must ensure that power connections maintain the proper polarity. The power source cables might be labeled is no standard color coding for DC power cables. The color coding used by the external DC power source at your site determines the color coding for the leads on the power cables that attach to the terminal studs on each power supply.
Page 221 Ensure that the voltage across the DC power source cable leads is 0 V and that the cable leads cannot become active during installation. CAUTION: You must ensure that power connections maintain the proper polarity. The power source cables might be labeled is no standard color coding for DC power cables.
Page 222: Replacing Crypto Accelerator Modules On J2320 And J2350 Routers
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 92: Installing a DC Power Supply Replacing Crypto Accelerator Modules on J2320 and J2350 Routers The Crypto Accelerator Module is a processor card that enhances performance of cryptographic algorithms used in IP security (IPSec) services. The Crypto Module is an optional feature on J2320 and J2350 Services Routers.
Page 223 Removing a J2320 or J2350 Crypto Accelerator Module NOTE: If you are installing a Crypto Accelerator Module into a J2320 or J2350 Services Router for the first time, proceed directly to “Installing a J2320 or J2350 Crypto Accelerator Module” on page 202. To remove the Crypto Accelerator Module: Place an electrostatic bag or antistatic mat on a flat stable surface to receive the Crypto Module.
Page 224 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Installing a J2320 or J2350 Crypto Accelerator Module To install a Crypto Accelerator Module: Take the following steps if you have not already done so: Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis, or to an outside ESD point if the router is disconnected from earth ground.
Page 225: Replacing Crypto Accelerator Modules On J4350 And J6350 Routers
Press and release the power button to power on the router. Verify that the LED lights steadily. Verify that the Crypto Module is correctly installed by issuing the hardware user@host> show chassis hardware user@host> show chassis hardware Hardware inventory: Item Chassis Midplane System IO...
Page 226: Removing A J4350 Or J6350 Crypto Accelerator Module
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 96: Crypto Accelerator Module Location on J4350 and J6350 Routers To modify a Crypto Accelerator Module configuration, use the following procedures: Removing a J4350 or J6350 Crypto Accelerator Module on page 204 Installing a J4350 or j6350 Crypto Accelerator Module on page 205 Removing a J4350 or J6350 Crypto Accelerator Module NOTE: If you are installing a Crypto Accelerator Module into a J4350 Services Router...
Page 227 Locate the Crypto Module on the system board (see Figure 96 on page 204). Using a Phillips screwdriver remove the screw, as shown in Figure 97 on page 205. Figure 97: Removing a J4350 or J6350 Crypto Module Screw Pull the white release clips on either side of the Crypto Module out to either side, as shown in Figure 98 on page 205, to tilt the Crypto Module upward.
Page 228 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to the ESD point on the chassis, or to an outside ESD point if the router is disconnected from earth ground. For more information about ESD, see “Preventing Electrostatic Discharge Damage”...
Page 229: Replacing Air Filters On J2350 Routers
Replacing Air Filters on J2350 Routers The cooling fans on J2350 routers draw air through vents along the left side of the chassis and exhaust it through vents on the right side of the chassis. For more information, see “J2320 and J2350 Cooling System” on page 25. On J2350 routers that comply with Network Equipment Building System (NEBS) criteria, the air intake grid contains a filter.
Page 230: Replacing Air Filters On J4350 And J6350 Routers
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Figure 100: Placing the Air Filter on the Air Filter Tray Press down on the filter until it is firmly seated against the bottom of the tray. Hold the filter tray with the thumbscrew so that its sheet metal side faces the power supply fan exhaust.
Page 231 Figure 102: Attaching Air Filter and Filter Cover We recommend changing the filter every 6 months. However, the optimal filter replacement interval can vary depending on the environment where the router is located. If temperature alarms appear, inspect the air filter. To replace the air filter: Remove the filter cover by squeezing the plastic tabs on either side of the filter cover.
Page 232 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Replacing Air Filters on J4350 and J6350 Routers...
Page 233: Troubleshooting Hardware Components
This chapter contains the following topics: Chassis Alarm Conditions on page 211 Troubleshooting Power Management on page 212 Contacting the Juniper Networks Technical Assistance Center on page 214 Chassis Alarm Conditions You can monitor alarms to troubleshoot hardware problems on a Services Router.
Page 234 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 64: Chassis Alarm Conditions and Corrective Actions (continued) Component Alarm Conditions A PIM has failed. When a PIM fails, it attempts to reboot. If the Routing Engine detects that a PIM is rebooting too often, it shuts down the PIM.
Page 235 To bring the PIM online: Check if the PIM has exceeded the power and heat tokens permitted by issuing show chassis fpc show chassis power-ratings user@host> show chassis fpc Temp CPU Utilization (%) Slot State 0 Online -------------------- CPU less FPC -------------------- 1 Online -------------------- CPU less FPC -------------------- 2 Online...
Page 236 Configuration Guide. Contacting the Juniper Networks Technical Assistance Center If you need assistance while troubleshooting a Services Router, open a support case using the Case Manager link at (within the United States) or 1-408-745-9500 (from outside the United States). For more information, see “Contacting Customer Support and Returning...
Page 237: Contacting Customer Support And Returning Hardware
Contacting Customer Support and Returning Hardware This chapter describes how to return the Services Router or individual components to Juniper Networks for repair or replacement. It contains the following topics: Locating Component Serial Numbers on page 215 Contacting Customer Support on page 218...
Page 238: J2320 And J2350 Chassis Serial Number And Agency Labels
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide The following sections describe the label location on each type of component: J2320 and J2350 Chassis Serial Number and Agency Labels on page 216 J4350 and J6350 Chassis Serial Number and Agency Labels on page 217 PIM Serial Number Label on page 218 Power Supply Serial Number Labels on page 218 J2320 and J2350 Chassis Serial Number and Agency Labels...
Page 239 Chapter 12: Contacting Customer Support and Returning Hardware Figure 104: Location of the Agency Labels J4350 and J6350 Chassis Serial Number and Agency Labels J4350 and J6350 Services Routers have serial number ID labels on the back of the chassis, as shown in Figure 105 on page 217, and an agency label on the bottom front corner, as shown in Figure 106 on page 218.
Page 240: Contacting Customer Support
Contacting Customer Support After you have located the serial numbers of the components you need to return, contact Juniper Networks Technical Assistance Center (JTAC) in one of the following ways. You can contact JTAC 24 hours a day, seven days a week.
Page 241: Information You Might Need To Supply To Jtac
NOTE: Do not return any component to Juniper Networks unless you have first obtained an RMA number. Juniper Networks reserves the right to refuse shipments that do not have an RMA.
Page 242: Packing A Router Or Component For Shipment
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide The support representative validates your request and issues an RMA number for return of the component. Pack the router or component for shipment, as described in “Packing a Router or Component for Shipment” on page 220. Packing a Router or Component for Shipment This section contains the following topics: Tools and Parts Required on page 220...
Page 243 Shut down power to the router by pressing the power button on the front panel of the router. Disconnect power from the router. For instructions, see “Replacing AC Power Supply Cords” on page 193 and “Replacing DC Power Supply Cables” on page 196. Remove the cables that connect to all external devices.
Page 244 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Packing a Router or Component for Shipment...
Page 245 Part 4 J-series Requirements and Specifications Network Cable Specifications and Connector Pinouts on page 225 Safety and Regulatory Compliance Information on page 245 J-series Requirements and Specifications...
Page 246 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide J-series Requirements and Specifications...
Page 247: Chapter 13 Network Cable Specifications And Connector Pinouts
Chapter 13 Network Cable Specifications and Connector Pinouts The network interfaces supported on the router accept different kinds of network cable. Serial PIM Cable Specifications on page 225 Fast Ethernet RJ-45 Connector Pinout on page 235 Gigabit Ethernet uPIM RJ-45 Connector Pinout on page 235 Gigabit Ethernet ePIM RJ-45 Connector Pinout on page 236 Chassis Console Port Pinouts on page 236 E1 and T1 RJ-48 Cable Pinouts on page 237...
Page 248: Rs-232 Dte Cable Pinout
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 65: 2-Port Serial PIM Cables and Connectors (continued) Name Connector RS-422/449 (EIA-449) DC-37 (DB-37) female EIA-530A DTE DB-25 male EIA-530A DCE DB-25 female V.35 DTE M/34 male V.35 DCE M/34 female X.21 DTE DB-15 male...
Page 249: Rs-232 Dce Cable Pinout
Table 66: RS-232 DTE Cable Pinout (continued) LFH-60 Pin DB-25 Pin 22 to 21 – 18 to 17 – RS-232 DCE Cable Pinout Table 67: RS-232 DCE Cable Pinout LFH-60 Pin DB-25 Pin 22 to 21 – RS-422/449 (EIA-449) DTE Cable Pinout Table 68: RS-422/449 (EIA-449) DTE Cable Pinout LFH-60 Pin DC-37 (DB-37) Pin...
Page 250 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 68: RS-422/449 (EIA-449) DTE Cable Pinout (continued) LFH-60 Pin DC-37 (DB-37) Pin 26 to 25 – 18 to 17 – Serial PIM Cable Specifications LFH-60 Pairing Description Send Data (A) Send Timing (A) Receive Data (A) Request to Send (A)
Page 251: Rs-422/449 (Eia-449) Dce Cable Pinout
RS-422/449 (EIA-449) DCE Cable Pinout Table 69: RS-422/449 (EIA-449) DCE Cable Pinout LFH-60 Pin DC-37 (DB-37) Pin 26 to 25 – Chapter 13: Network Cable Specifications and Connector Pinouts LFH-60 Pairing Description – Shield Ground Send Data (A) Send Timing (A) Receive Data (A) Request to Send (A) Receive Timing (A)
Page 252: Eia-530A Dte Cable Pinout
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide EIA-530A DTE Cable Pinout Table 70: EIA-530A DTE Cable Pinout LFH-60 Pin DB-25 Pin 26 to 25 – 30 to 29 – 18 to 17 – Serial PIM Cable Specifications LFH-60 Pairing Description –...
Page 253: Eia-530A Dce Cable Pinout
EIA-530A DCE Cable Pinout Table 71: EIA-530A DCE Cable Pinout LFH-60 Pin DB-25 Pin 26 to 25 – 30 to 29 – Chapter 13: Network Cable Specifications and Connector Pinouts LFH-60 Pairing Description – Shield Ground Transmit Data (A) Receive Data (A) Request to Send (A) Clear to Send (A) –...
Page 254: V.35 Dte Cable Pinout
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide V.35 DTE Cable Pinout Table 72: V.35 DTE Cable Pinout LFH-60 Pin M/34 Pin 22 to 21 – 26 to 25 – 18 to 17 – Serial PIM Cable Specifications LFH-60 Pairing Description –...
Page 255: V.35 Dce Cable Pinout
V.35 DCE Cable Pinout Table 73: V.35 DCE Cable Pinout LFH-60 Pin M/34 Pin 22 to 21 – 26 to 25 – X.21 DTE Cable Pinout Table 74: X.21 DTE Cable Pinout LFH-60 Pin DB-15 Pin Chapter 13: Network Cable Specifications and Connector Pinouts LFH-60 Pairing Description –...
Page 256: X.21 Dce Cable Pinout
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 74: X.21 DTE Cable Pinout (continued) LFH-60 Pin DB-15 Pin 30 to 29 – 18 to 17 – X.21 DCE Cable Pinout Table 75: X.21 DCE Cable Pinout LFH-60 Pin DB-15 Pin Serial PIM Cable Specifications LFH-60 Pairing...
Page 257: Fast Ethernet Rj-45 Connector Pinout
Table 75: X.21 DCE Cable Pinout (continued) LFH-60 Pin DB-15 Pin 30 to 29 – Fast Ethernet RJ-45 Connector Pinout Table 76 on page 235 describes the Fast Ethernet RJ-45 connector pinout information. NOTE: Either a straight-through or cross-over cable can be used to connect to the interface.
Page 258: Gigabit Ethernet Epim Rj-45 Connector Pinout
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 77: Gigabit Ethernet uPIM RJ-45 Connector Pinout (continued) Signal Name BI_DB+ BI_DC+ BI_DC- BI_DB- BI_DD+ BI_DD- Gigabit Ethernet ePIM RJ-45 Connector Pinout Table 78 on page 236 describes connector pinout information for 1-port Gigabit Ethernet ePIM ports.
Page 259: E1 And T1 Rj-48 Cable Pinouts
Table 79: RJ-45 Chassis Console Connector Pinout Table 80 on page 237 describes the DB-9 connector pinouts. Table 80: DB-9 Console Connector Pinout Signal Ground RING E1 and T1 RJ-48 Cable Pinouts The E1 and T1 PIMs use an RJ-48 cable, which is not supplied with the PIM. CAUTION: To maintain agency approvals, use only a properly constructed, shielded cable.
Page 260 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 81 on page 238 through Table 84 on page 239 describe the RJ-48 connector pinouts. Table 81: RJ-48 Connector to RJ-48 Connector (Straight) Pinout RJ-48 Pin (on T1/E1 PIM) (Data Numbering Form) Table 82: RJ-48 Connector to RJ-48 Connector (Crossover) Pinout RJ-48 Pin (on T1/E1 PIM)
Page 261 Table 83: RJ-48 Connector to DB-15 Connector (Straight) Pinout DB-15 Pin RJ-48 Pin (on T1/E1 PIM) (Data Numbering (Data Numbering Form) Form) No connect No connect No connect No connect No connect No connect No connect No connect No connect Table 84: RJ-48 Connector to DB-15 Connector (Crossover) Pinout DB-15 Pin RJ-48 Pin (on T1/E1 PIM)
Page 262: E3 And T3 Bnc Connector Pinout
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 84: RJ-48 Connector to DB-15 Connector (Crossover) Pinout (continued) RJ-48 Pin (on T1/E1 PIM) (Data Numbering Form) E3 and T3 BNC Connector Pinout The E3 and T3 PIMs each use two BNC connectors—one for transmitting data ( and one for receiving data ( ADSL and G.SHDSL RJ-11 Connector Pinout The 1-port ADSL 2/2+ Annex A and Annex B PIMs use an RJ-11 cable, which is not...
Page 263: Isdn Rj-45 Connector Pinout
ISDN RJ-45 Connector Pinout The 1-port and 4-port ISDN PIMs use an RJ-45 cable, which is not supplied with the PIMs. Table 86 on page 241 describes the RJ-45 connector pinout. Table 86: ISDN RJ-45 Connector Pinout Connector Pinouts for Avaya VoIP Modules The Avaya VoIP modules supported on the Services Router accept different kinds of network cables.
Page 264: Tgm550 Rj-11 Connector Pinout For Analog Ports
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide NOTE: Two different RJ-45 cables and RJ-45 to DB-9 adapters are provided. Do not use the RJ-45 cable and adapter for the Services Router console port to connect to the TGM550 console port. To connect the console port to an external management device, you need an RJ-45 to DB-9 serial port adapter, which is also supplied with the TGM550.
Page 265: Tim510 Rj-45 Connector Pinout
TIM510 RJ-45 Connector Pinout The TIM510 Telephony Interface Module uses an RJ-45 cable. Table 89 on page 243 describes the TIM510 RJ-45 connector pinout. Table 89: TIM510 RJ-45 Connector Pinout Signal R - Receive T - Receive No connection R1 - Receive T1 - Receive No connection No connection...
Page 266 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Table 91: TIM521 RJ-45 Connector Pinout Signal No connection No connection Transmit pair + Receive pair + Receive pair – Transmit pair – No connection No connection Connector Pinouts for Avaya VoIP Modules...
Page 267: Safety And Regulatory Compliance Information
Chapter 14 Safety and Regulatory Compliance Information To install and use the Services Router safely, follow proper safety procedures. This chapter discusses the following safety and regulatory compliance information: Definition of Safety Warning Levels on page 245 Safety Guidelines and Warnings on page 247 Agency Approvals on page 279 Compliance Statements for Environmental Requirements on page 280 Compliance Statements for EMC Requirements on page 280...
Page 268 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide WARNING: Varoitus Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja tavanomaisista onnettomuuksien ehkäisykeinoista. WARNING: Attention Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant causer des blessures ou des dommages corporels.
Page 269: General Safety Guidelines And Warnings
WARNING: Varning! Denna varningssymbol signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanligt förfarande för att förebygga skador. Safety Guidelines and Warnings This section lists the following safety guidelines and warnings for installing, operating, and maintaining a Services Router:...
Page 270: Qualified Personnel Warning
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Do not open or remove chassis covers or sheet metal parts unless instructions are provided in this manual. Such an action could cause severe electrical shock. Do not push or force any objects through any opening in the chassis frame. Such an action could result in electrical shock or fire.
Page 271: Preventing Electrostatic Discharge Damage
Preventing Electrostatic Discharge Damage Many Services Router hardware components are sensitive to damage from static electricity. Some components can be impaired by voltages as low as 30 V. You can easily generate potentially damaging static voltages whenever you handle plastic or foam packing material or if you move components across plastic or carpets.
Page 272 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide DC Power Electrical Safety Guidelines on page 252 Power Sources for Redundant Power Supplies on page 252 DC Power Disconnection Warning on page 253 DC Power Grounding Requirements and Warning on page 254 DC Power Wiring Sequence Warning on page 255 DC Power Wiring Terminations Warning on page 256 Grounded Equipment Warning on page 258...
Page 273 Many Services Router components can be removed and replaced without powering down or disconnecting power to the Services Router, as detailed in elsewhere in this manual. Never install equipment if it appears damaged. AC Power Electrical Safety Guidelines The following electrical safety guidelines apply to AC-powered routers: AC-powered routers are shipped with a three-wire electrical cord with a grounding-type plug that fits only a grounding-type power outlet.
Page 274: Dc Power Electrical Safety Guidelines
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide DC Power Electrical Safety Guidelines The following electrical safety guidelines apply to a DC-powered router: A DC-powered router is equipped with a DC terminal block that is rated for the power requirements of a maximally configured router.
Page 275: Dc Power Disconnection Warning
Chapter 14: Safety and Regulatory Compliance Information DC Power Disconnection Warning WARNING: Before performing any of the following procedures, ensure that power is removed from the DC circuit. To ensure that all power is off, locate the circuit breaker on the panel board that services the DC circuit, switch the circuit breaker to position, and tape the switch handle of the circuit breaker in the position.
Page 276: Dc Power Grounding Requirements And Warning
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide de corrente contínua e coloque-o na posição OFF (Desligado), segurando nessa posição a manivela do interruptor do disjuntor com fita isoladora. ¡Atención! Antes de proceder con los siguientes pasos, comprobar que la alimentación del circuito de corriente continua (CC) esté...
Page 277: Dc Power Wiring Sequence Warning
Chapter 14: Safety and Regulatory Compliance Information ¡Atención! Al instalar el equipo, conectar la tierra la primera y desconectarla la última. Varning! Vid installation av enheten måste jordledningen alltid anslutas först och kopplas bort sist. DC Power Wiring Sequence Warning WARNING: Wire the DC power supply using the appropriate lugs.
Page 278: Dc Power Wiring Terminations Warning
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide La corretta sequenza di cablaggio è da massa a massa, da positivo a positivo (da linea ad L) e da negativo a negativo (da neutro a N). Tenere presente che il filo di massa deve sempre venire collegato per primo e scollegato per ultimo.
Page 279 Chapter 14: Safety and Regulatory Compliance Information WARNING: Varoitus Jos säikeellinen johdin on tarpeen, käytä hyväksyttyä johdinliitäntää, esimerkiksi suljettua silmukkaa tai kourumaista liitäntää, jossa on ylöspäin käännetyt kiinnityskorvat. Tällaisten liitäntöjen tulee olla kooltaan johtimiin sopivia ja niiden tulee puristaa yhteen sekä eristeen että johdinosan. WARNING: Attention Quand des fils torsadés sont nécessaires, utiliser des douilles terminales homologuées telles que celles à...
Page 280: Grounded Equipment Warning
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide WARNING: Varning! När flertrådiga ledningar krävs måste godkända ledningskontakter användas, t.ex. kabelsko av sluten eller öppen typ med uppåtvänd tapp. Storleken på dessa kontakter måste vara avpassad till ledningarna och måste kunna hålla både isoleringen och ledaren fastklämda.
Page 281: In Case Of Electrical Accident
Varning! Apparaten skall anslutas till jordat nätuttag. In Case of Electrical Accident If an electrical accident results in an injury, take the following actions in this order: Use caution. Be aware of potentially hazardous conditions that could cause further injury. Disconnect power from the Services Router.
Page 282: Power Disconnection Warning
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide WARNING: Advarsel Denne J6350 enheten har mer enn én strømtilkobling. Alle tilkoblinger må kobles helt fra for å eliminere strøm fra enheten. WARNING: Aviso Este J6350 dispositivo possui mais do que uma conexão de fonte de alimentação de energia;...
Page 283: Tn Power Warning
Chapter 14: Safety and Regulatory Compliance Information WARNING: Avvertenza Prima di lavorare su un telaio o intorno ad alimentatori, scollegare il cavo di alimentazione sulle unità CA. WARNING: Advarsel Før det utføres arbeid på kabinettet eller det arbeides i nærheten av strømforsyningsenheter, skal strømledningen trekkes ut på...
Page 284: Telecommunication Line Cord Warning
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide WARNING: Avvertenza Il dispositivo è stato progettato per l'uso con sistemi di alimentazione TN. WARNING: Advarsel Utstyret er utfomet til bruk med TN-strømsystemer. WARNING: Aviso O dispositivo foi criado para operar com sistemas de corrente TN. WARNING: ¡Atención! El equipo está...
Page 285: Installation Safety Guidelines And Warnings
WARNING: Avvertenza Per ridurre il rischio di incendio, usare solo un cavo per linea di telecomunicazioni di sezione 0,12 mm2 (26 AWG) o maggiore. WARNING: Advarsel Bruk kun AWG nr. 26 eller telekommunikasjonsledninger med større dimensjon for å redusere faren for brann. WARNING: Aviso Para reduzir o risco de incêndio, utilize apenas terminais de fio de telecomunicações Nº.
Page 286: Installation Instructions Warning
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Installation Instructions Warning WARNING: Read the installation instructions before you connect the router to a power source. Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem met de voeding verbindt. Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen. Attention Avant de brancher le système sur la source d'alimentation, consulter les directives d'installation.
Page 287 De onderstaande richtlijnen worden verstrekt om uw veiligheid te verzekeren: De Juniper Networks router moet in een stellage worden geïnstalleerd die aan een bouwsel is verankerd. Dit toestel dient onderaan in het rek gemonteerd te worden als het toestel het enige in het rek is.
Page 288 Les directives ci-dessous sont destinées à assurer la protection du personnel: Le rack sur lequel est monté le Juniper Networks router doit être fixé à la structure du bâtiment. Si cette unité constitue la seule unité montée en casier, elle doit être placée dans le bas.
Page 289 Para garantizar su seguridad, proceda según las siguientes instrucciones: El Juniper Networks router debe instalarse en un bastidor fijado a la estructura del edificio. Colocar el equipo en la parte inferior del bastidor, cuando sea la única unidad en el mismo.
Page 290: Ramp Warning
Följande riktlinjer ges för att trygga din säkerhet: Juniper Networks router måste installeras i en ställning som är förankrad i byggnadens struktur. Om denna enhet är den enda enheten på ställningen skall den installeras längst ned på...
Page 291: Laser And Led Safety Guidelines And Warnings
Varning! Använd inte ramp med en lutning på mer än 10 grader. Laser and LED Safety Guidelines and Warnings Single-mode Physical Interface Modules (PIMs) are equipped with laser transmitters, which are considered a Class 1 Laser Product by the U.S. Food and Drug Administration, and are evaluated as a Class 1 Laser Product per EN 60825–1 requirements.
Page 292: Class 1 Led Product Warning
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Warnung Laserprodukt der Klasse 1. WARNING: Avvertenza Prodotto laser di Classe 1. Advarsel Laserprodukt av klasse 1. Aviso Produto laser de classe 1. ¡Atención! Producto láser Clase I. Varning! Laserprodukt av klass 1. Class 1 LED Product Warning WARNING: Class 1 LED product.
Page 293: Radiation From Open Port Apertures Warning
Chapter 14: Safety and Regulatory Compliance Information WARNING: Waarschuwing Niet in de straal staren of hem rechtstreeks bekijken met optische instrumenten. WARNING: Varoitus Älä katso säteeseen äläkä tarkastele sitä suoraan optisen laitteen avulla. WARNING: Attention Ne pas fixer le faisceau des yeux, ni l'observer directement à l'aide d'instruments optiques.
Page 294 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide WARNING: Waarschuwing Aangezien onzichtbare straling vanuit de opening van de poort kan komen als er geen fiberkabel aangesloten is, dient blootstelling aan straling en het kijken in open openingen vermeden te worden. WARNING: Varoitus Koska portin aukosta voi emittoitua näkymätöntä...
Page 295: Maintenance And Operational Safety Guidelines And Warnings
WARNING: Varning! Osynlig strålning kan avges från en portöppning utan ansluten fiberkabel och du bör därför undvika att bli utsatt för strålning genom att inte stirra in i oskyddade öppningar. Maintenance and Operational Safety Guidelines and Warnings As you maintain the Services Router, observe the following guidelines and warnings: Battery Handling Warning on page 273 Jewelry Removal Warning on page 274 Lightning Activity Warning on page 276...
Page 296 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide WARNING: Advarsel Det kan være fare for eksplosjon hvis batteriet skiftes på feil måte. Skift kun med samme eller tilsvarende type som er anbefalt av produsenten. Kasser brukte batterier i henhold til produsentens instruksjoner. WARNING: Avvertenza Pericolo di esplosione se la batteria non è...
Page 297 Chapter 14: Safety and Regulatory Compliance Information lukien). Metalliesineet kuumenevat, kun ne ovat yhteydessä sähkövirran ja maan kanssa, ja ne voivat aiheuttaa vakavia palovammoja tai hitsata metalliesineet kiinni liitäntänapoihin. WARNING: Attention Avant d'accéder à cet équipement connecté aux lignes électriques, ôter tout bijou (anneaux, colliers et montres compris). Lorsqu'ils sont branchés à...
Page 298: Lightning Activity Warning
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide WARNING: Varning! Tag av alla smycken (inklusive ringar, halsband och armbandsur) innan du arbetar på utrustning som är kopplad till kraftledningar. Metallobjekt hettas upp när de kopplas ihop med ström och jord och kan förorsaka allvarliga brännskador; metallobjekt kan också...
Page 299: Operating Temperature Warning
Om te voorkomen dat de luchtstroom wordt beperkt, dient er minstens 15,2 cm speling rond de ventilatie-openingen te zijn. WARNING: Varoitus Ettei Juniper Networks router-sarjan reititin ylikuumentuisi, sitä ei saa käyttää tilassa, jonka lämpötila ylittää korkeimman suositellun ympäristölämpötilan 40 C. Ettei ilmanvaihto estyisi, tuuletusaukkojen ympärille on jätettävä...
Page 300: Product Disposal Warning
40 C. Para evitar a restrição à circulação de ar, deixe pelo menos um espaço de 15,2 cm à volta das aberturas de ventilação. WARNING: ¡Atención! Para impedir que un encaminador de la serie Juniper Networks router se recaliente, no lo haga funcionar en un área en la que se supere la temperatura ambiente máxima recomendada de 40 C.
Page 301: Agency Approvals
WARNING: Warnung Dieses Produkt muß den geltenden Gesetzen und Vorschriften entsprechend entsorgt werden. WARNING: Avvertenza L'eliminazione finale di questo prodotto deve essere eseguita osservando le normative italiane vigenti in materia WARNING: Advarsel Endelig disponering av dette produktet må skje i henhold til nasjonale lover og forskrifter.
Page 302: Compliance Statements For Environmental Requirements
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide FCC Part 68 Industry Canada CS-03 EMC (J4320 and J6350) AS/NZS 3548 Class B (Australia/New Zealand) EN 55022 Class B Emissions (Europe) FCC Part 15 Class B (USA) VCCI Class B (Japan) FCC Part 68 Industry Canada CS-03 Immunity...
Page 303: Japan
Japan on page 283 United States on page 284 Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements.
Page 304 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide European Community Compliance Statements for EMC Requirements...
Page 305 Chapter 14: Safety and Regulatory Compliance Information Japan The preceding translates as follows: This is a Class B product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this product is used near a radio or television receiver in a domestic environment, it may cause radio interference.
Page 306: Fcc Part 15 Statement
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide United States The Services Router has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 307 If trouble is experienced with this equipment or for repair or warranty information, please follow the applicable procedures explained in the “Technical Support” section of this manual. FCC Registration Number—See label on product. Required Connector (USOC)—RJ-48C Service Order Code (SOC)—6.ON Compliance Statements for EMC Requirements Chapter 14: Safety and Regulatory Compliance Information...
Page 308 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Compliance Statements for EMC Requirements...
Page 309: Part 5 Index
Part 5 Index Index on page 289 Index...
Page 310 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Index...
Page 311: Index
Index Symbols #, comments in configuration statements...xviii #, configuration mode command prompt...91 ( ), in syntax descriptions...xviii * (red asterisk)...84 4-Port Fast Ethernet ePIM...62 4-Port ISDN BRI S/T PIM description...63 PIM ONLINE LED...64 4-Port ISDN BRI U PIM description...63 PIM ONLINE LED...64 <...
Page 312 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide analog telephone (LINE) ports TGM550, pinouts...242 TIM514, pinouts...243 TIM514, possible configurations...75 analog trunk (TRUNK) ports TGM550, pinouts...242 TIM514, pinouts...243 TIM514, possible configurations...75 Annex A; Annex B See ADSL; SHDSL antistatic mat...249 Apply button...86 approvals, agency...279 ASB LED...72...
Page 313 chassis console port, DB-9 connector pinouts...237 chassis console port, RJ-45 connector pinouts...236 connecting to network media...121 console port cable (chassis), connecting...137, 140 console port cable (chassis), replacing...174 DC cables See DC power cables disconnecting PIM cables...177 E1 RJ-48 pinouts...237 Ethernet cable, connecting...135, 137, 140 Fast Ethernet RJ-45 connector pinout...235 Gigabit Ethernet RJ-45 connector pinouts (ePIM)...236...
Page 314 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide compact flash backup, replacing...186 description...18, 31 external, description...24 external, J2320 and J2350...24 external, replacing...186 inserting...185 location (horizontal)...184 location (vertical)...183 minor (yellow) alarm...211 removing...185 replacing...180, 183 replacing, rotating fans warning...181, 184 compliance EMC requirements...280 general standards...279...
Page 315 J4350 system...36 J6350 system...37 power disconnection warning...253 removing a J6350 power supply...197 requirements...106 safety guidelines (general)...252 safety guidelines, power sources for redundant power supplies...252 wiring sequence warning...255 wiring terminations warning...256 DC power cables electrical specifications...108 physical requirements...108 replacing...196 usage warning...252 Declaration of Conformity...282 default gateway defining (Quick Configuration)...144...
Page 316 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide EMI (electromagnetic interference) compliance with requirements...280 standards...279 suppressing...106 encrypted access through HTTPS...151 through SSH...134 through SSL...151 environment, CLI displaying...95 setting...95 environmental requirements for operation...104 ePIMs 4-Port Fast Ethernet...62 Copper Gigabit Ethernet...52 SFP Gigabit Ethernet...52 slot locations...33 EPROM...18, 31...
Page 317 RJ-45 connector pinouts (uPIMs)...235 SFP (optical)...51, 53 Gigabit Ethernet uPIMs alarms...52 description...49 installation...51 LEDs...52 limitations...51 link speeds and transmission modes ...51 SFP, optical interface support...52 glossary basic connectivity...129 PIMs...44 secure Web access...151 graceful shutdown...127 graphical user interface See J-Web interface grounding Avaya VoIP 10 AWG replacement cable...67 cable...121...
Page 318 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide requirements...115 restricted access, J2350...117 restricted access, J4350 and J6350...25, 37, 38, 118 safety guidelines and warnings...263 site checklist...112 site guidelines...101 USB storage device...189 Integrated Services Digital Network See ISDN interface software process...40 interfaces J2320 overview...4 J2320 types supported...46...
Page 319 J2350 air filter, replacing...207 Avaya VoIP modules...67 boot devices...19 boot sequence...19 chassis...14 chassis cover, replacing...178 compact flash location...181 compact flash, replacing...181 cooling system...25 electrical specifications...107 external compact flash...24 fans...25 front panel...19 hardware...13, 26 installation...117 interfaces supported...46 mounting brackets...117 overview...4 physical specifications...17 PIMs supported...46 ports supported...46 power management...110...
Page 320 USB port...36 Japan, compliance statement...283 JTAC (Juniper Networks Technical Assistance Center) contacting...214 contacting for hardware return...218 information required for hardware return...219 Juniper Networks Technical Assistance Center See JTAC JUNOS CLI CLI terminal...90 command completion...93 command hierarchy...89 command modes...80 command prompts See command prompts connecting locally...137...
Page 321 SHDSL port status...67 SIG (signal)...74 STATUS (router)...21, 34 T1 port status...57 T3 port status...60 TGM550 port status...72 TIM510 link status...74 TIM514 link status...75 TIM521 link status...76 TST (test)...74 TX/RX...23, 35, 54 license infringement identifying any licenses needed...164 verifying license usage...169 verifying licenses installed...168 license keys components...162...
Page 322 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide minor (yellow) alarms alternative boot device...211 internal compact flash...211 Routing Engine...212 modem commands at remote end...141 at router end...140 modem connection to router console port configuring modem at router end...139 configuring modem at user end...141 connecting modem to router...140 overview...139...
Page 323 pinouts ADSL RJ-11 connector...240 Avaya VoIP modules...241 chassis console DB-9 connector...237 chassis console port...236 EIA-530A DCE serial cable...231 EIA-530A DTE serial cable...230 Fast Ethernet connector...235 Gigabit Ethernet connector (ePIM)...236 Gigabit Ethernet connector (uPIMs)...235 ISDN RJ-45 connector...241 RJ-45 chassis console connector...236 RJ-45 TGM550 console connector...241 RJ-48 connector to DB-15 connector (crossover)...239...
Page 324 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide removing DC...197 serial number label...218 power system connecting...123, 124 fan...25, 38 J2320...24 J4350...36 J6350...37 power supply LED...37 preparing for installation...101 processes, software chassis process...40 forwarding process...40 interface process...40 management process...40 routing protocol process...40 product disposal...278 product overview...3...
Page 325 RJ-48 connector to DB-15 connector (crossover) pinouts...239 RJ-48 connector to DB-15 connector (straight) pinouts...239 RJ-48 connector to RJ-48 connector (crossover) pinouts...238 RJ-48 connector to RJ-48 connector (straight) pinouts...238 RMA (Return Materials Authorization)...215 number...219 packing a Services Router for shipment...220 packing components for shipment...221 procedure...219 tools and parts required...220 root password...
Page 326 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide EIA-530A DCE pinouts...231 EIA-530A DTE pinouts...230 LED states...56 RS-232 DCE pinouts...227 RS-232 DTE pinouts...226 RS-422/449 (EIA-449) DCE pinouts...229 RS-422/449 (EIA-449) DTE pinouts...227 V.35 DCE pinouts...233 V.35 DTE pinouts...232 X.21 DCE pinouts...234 X.21 DTE pinouts...233 service provider, contacting for ISDN provisioning...112...
Page 327 slot numbers, PIM chassis diagram...20, 33 displayed as FPC number in command output...178 small form-factor pluggable transceivers See SFP SNMP (Simple Network Management Protocol), no Gigabit Ethernet support...51, 54 software...39 features...39 licenses See licenses See also JUNOS Internet software specifications AC electrical connection...107 AC power cords...108 DC electrical connection...108...
Page 328 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Telephony Interface Modules See TIM510; TIM514; TIM521 Telnet defining access (Quick Configuration)...144 management access...133 temperature required for operation...104 Routing Engine, too warm...212 shutdown, NEBS-compliant routers...25, 38 shutdown, non-NEBS-compliant routers...38 warning...277 temperature alarm, air filter replacement for...208 terminal type, setting ...97 terminology...
Page 329 warnings battery handling...273 DC power cables...252 DC power disconnection...253 DC power plant and chassis ground...109 DC wiring sequence...255 DC wiring terminations...256 DC-powered J4350, and J6350 routers, restricted access installation only ...106 earthed mains socket (Norway and Sweden only)...258 electrical...249 ESD strap to prevent router damage...27 follow lifting guidelines...117, 119 general...247 grounded equipment...258...
Page 330 J2320, J2350, J4350, and J6350 Services Router Getting Started Guide Index...

This manual is also suitable for:

J6350 J2350 J4350

Juniper J-series Services Router J2320 Getting Started Manual

About this Guide

J-Series Overview

Chapter 1 Overview of Services Routers

Chapter 2 System Overview

PIM and Voip Module Overview

Installing a Services Router

Preparing for Router Installation

Installing and Connecting a Services Router

Chapter 7 Establishing Basic Connectivity

Configuring Secure Web Access

Installing and Managing J-Series Licenses

Chapter 8 Configuring Secure Web Access

Maintaining Services Router Hardware

Chapter 9 Installing and Managing J-Series Licenses

Chapter 4 Services Router User Interface Overview

Chapter 6 Installing and Connecting a Services Router

Chapter 5 Preparing for Router Installation

Chapter 3 PIM and Voip Module Overview

Chapter 10 Replacing Hardware Components

Chapter 11 Troubleshooting Hardware Components

Chapter 12 Contacting Customer Support and Returning Hardware

Chapter 13 Network Cable Specifications and Connector Pinouts

Chapter 14 Safety and Regulatory Compliance Information

Quick Links

Related Manuals for Juniper J-series Services Router J2320

Summary of Contents for Juniper J-series Services Router J2320