Juniper J2300 User Manual page 253

Select Diagnose>Traceroute.
1.
Next to Advanced options, click the expand icon (see Figure 53).
2.
Enter information into the Traceroute page, as described in Table 83.
3.
The field is the only required field.
Remote Host
Click Start.
4.
The results of the traceroute operation are displayed in the main pane. If no
options are specified, each line of the traceroute display is in the following
format:
hop-number host ( ip-address ) [ as-number ] time1 time2 time3
The Services Router sends a total of three traceroute packets to each router
along the path and displays the round-trip time for each traceroute operation.
If the Services Router times out before receiving a
asterisk (*) is displayed for that round-trip time.
Table 84 summarizes the output fields of the display.
To stop the traceroute operation before it is complete, click OK while the results
5.
of the traceroute operation are being displayed.
Monitoring and Diagnosing a Services Router
message, an
Time Exceeded
Using J-Web Diagnostic Tools
223