License Key Components; Before You Begin; Managing J-Series Licenses With The J-Web Interface - Juniper J2300 User Manual

Licensed Port
Additional port on a E1 PIM.
Serial
Additional port on a serial PIM.
Fast Ethernet
Additional port on a Fast Ethernet PIM.
The LAN ports (
Additionally, one port per PIM can be configured without a port license. A port
license is required only if you configure more than one port on a particular PIM.

License Key Components

A license key consists of two parts:
For example, in the following typical license key, the string
license ID, and the trailing block of data is the license data:
li29183743 4ky27y acasck 82fsj6 jzsn4q ix8i8d adj7kr
The license data defines the device ID for which the license is valid
and the version of the license.

Before You Begin

Before you begin managing the J-series licenses, complete the following tasks:

Managing J-series Licenses with the J-Web Interface

To manage licenses with the J-Web interface, you perform the following tasks:
and
fe-0/0/0 fe-0/0/1
License ID—Alphanumeric string that uniquely identifies the license key.
When a license is generated, it is given a license ID.
License data—Block of binary data that defines and stores all license key
objects.
8uq38t ix8i8d jzsn4q ix8i8d 4ky27y acasck
82fsj6 ii8i7e adj7kr 8uq38t ks2923 a9382e
Purchase the licenses you require.
Establish basic connectivity. See "Establishing Basic Connectivity" on page 47.
Adding New Licenses with the J-Web Interface on page 73
License Name
J-series Services Router Software License for One Additional
E1 Port
J-series Services Router Software License for One Additional
Serial Port
J-series Services Router Software License for One Additional
Fast Ethernet Port
) do not require port licenses.
Managing J-series Licenses with the J-Web Interface
Managing J-series Licenses
is the
li29183743
71