Electrical Safety Guidelines And Warnings - Juniper J2300 User Manual

J-series™ Services Router User Guide
CAUTION: For safety, periodically check the resistance value of the ESD strap. The
measurement should be in the range of 1 to 10 Mohms.
Figure 111: Place a Component into an Electrostatic Bag

Electrical Safety Guidelines and Warnings

When working on equipment powered by electricity, follow the guidelines
described in the following sections.
568
Safety Guidelines and Warnings
When handling any component that is removed from the chassis, make sure
the equipment end of your ESD strap is attached to one of the electrostatic
discharge points on the chassis, which are shown in Figure 1 and Figure 2
for the J2300 chassis and in Figure 6 and Figure 7 for the J4300 chassis
and J6300 chassis.
Avoid contact between the component and your clothing. ESD voltages
emitted from clothing can still damage components.
When removing or installing a component, always place it component-side up
on an antistatic surface, in an antistatic card rack, or in an electrostatic bag
(see Figure 111). If you are returning a component, place it in an electrostatic
bag before packing it.
CAUTION
ELECTROSTATIC
SENSITIVE
DEVICES
DO NOT OPEN OR HANDLE
EXCEPT AT A
STATIC-FREE WORKSTATION