Show Policy-Map - Cisco Nexus 7000 Series Command Reference Manual

show policy-map

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
show policy-map
To display policy maps and statistics, use the show policy-map command.
Syntax Description
type
qos
queuing
policy-map-name
qos-dynamic
Defaults
None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0
4.0(3)
4.2(1)
Usage Guidelines
When you enter the command show policy-map with no arguments or keywords, the system also
displays the Control Plane Policing (CoPP) information.
This command does not require a license.
Examples
This example shows how to display a named policy map:
switch(config)# show policy-map abc
Type qos policy-maps
====================
policy-map type qos abc
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-96
show policy-map [type {qos | queuing}] [policy-map-name | qos-dynamic]
(Optional) Specifies the component type to display.
Specifies the policy maps of the type qos only.
Specifies the policy maps of the type queuing only.
Named policy map.
(Optional) Displays already configured policy maps.
Modification
This command was introduced.
The WRR for the type queuing default-in-policy was changed from 50/50
to 80/20.
The qos-dynamic variable was added.
class abc
set dscp 3
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
OL-23378-01