Adjusting The Handle Height; Adjusting The Cutting Height - Toro Recycler 20337 Operator's Manual

Adjusting the Handle Height

You can raise or lower the handle in 1 of 2 positions that is more comfortable for you
1. Remove both handle knobs.
2. Move the handle to the desired height position.
3. Secure the handle with the previously removed handle knobs.

Adjusting the Cutting Height

CAUTION
If the engine has been running, the muffler will be hot and can severely burn you.
Keep away from the hot muffler.
Adjust the cutting height as desired. Set all wheels to the same cutting height
Figure 11
Figure 12
11
(Figure 11).
(Figure 12).
g269686
g254131