2.2
Creating Cutting Data
This section explains the basic operation of Dr. STIKA PLUS while making the sticker shown below. For information on editing and
operation to match the task at hand, please refer to "3 Mastering the SX" or the help for Dr. STIKA PLUS and the driver.
Starting the Software
Click [Start], and point to [Program].
1
Then point to [Roland Dr. STIKA PLUS] and click [Dr.
STIKA PLUS].
2
The opening screen appears and Dr. STIKA PLUS starts.
SALE
Part 2 Performing Cutting
2-3