Part Names - Roland GR-640 User Manual

Part Names

Main Unit
Front
Number
1 Left pinch roller
Middle pinch rollers
(the number of which varies
2
depending on the size of the
machine)
3 Right pinch roller
4 Operation panel
5 Cutting carriage
6 Power switch
7 Ruler
8 Grit pattern
9 Blade protector
10 Grit rollers
11 Platen
Name
To raise or lower this part, press ［PINCH］. This part lowers to
pinch the material.
Set this at the left edge of the material.
To raise or lower these parts, press ［PINCH］. These parts
lower to pinch the material.
Set these in the middle of the material.
To raise or lower this part, press ［PINCH］. This part lowers to
pinch the material.
Set this at the right edge of the material.
Use the display and the keys to operate and set this machine.
Install the blade holder.
This part moves to the left and right to cut the material.
Turns the machine's power on and off.
Set the material in place so that its right edge is aligned with the
front and back rulers.
These indicate the locations of the grit rollers. When loading the
material, be sure to place the pinch rollers within the area
indicated by each of these patterns.
This protects the tip of the blade during cutting.
These rollers feed the material to the front and rear.
This is the path over which the material passes. A suction fan
that keeps the material from coming loose is built in.
Description