Removing And Installing Brake Shield Plate - Skoda Kodiaq 2017 Workshop Manual

2.5 Removing and installing brake shield
plate
Removing
– Remove brake disc
⇒ "2.4 Removing and installing brake disc", page 66
For vehicles with closed heat protection plate
– Removing wheel hub ⇒ Chassis, axles, steering; Rep. gr. 42 ;
Wheel bearing, trailing arm; Removing and installing wheel
bearing unit .
Continued for all vehicles
– Remove screws -arrows-.
– Remove cover plate -1-.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– Clean the contact surfaces for the cover plate and the wheel
bearing housing.
Tightening torques - summaries of components
Note
Replace bolts / nuts that are tightened at an angle of rotation, as
well as replacement components after removal.
♦ ⇒ "2.1 Assembly overview - rear brakes", page 56
♦ Wheel hub ⇒ Chassis, axles, steering; Rep. gr. 42 ; Wheel
bearing, trailing arm; Summary of components - wheel bearing
♦ Wheel bolts ⇒ Running gear, axles, steering; Rep. gr. 44 ;
Wheels, tyres; Specified torque for wheel bolts .
Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
.
67
2. Rear brakes