Order of tightening
4.1.2
Summary of components - brake pedal, right-hand drive
WARNING
The brake pedal travel must not be restricted by additional floor
coverings.
Note
Replace bolts / nuts that are tightened at an angle of rotation, as well as replacement components after
♦
removal.
Grease all bearing surfaces with polycarbamide grease - G 052 142 A2- before assembly.
♦
Do not grease the bearing bolt. The bearing bolt must remain dry.
♦
The brake light switch - F- and brake pedal switch - F47- are located on the master brake cylinder.
♦
Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
73
4. Brake pedal