Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
3.1.2
Exploded view – control unit and hydraulic unit, right-hand drive vehicle
Note
Replace bolts / nuts that are tightened at an angle of rotation, as well as replacement components after
♦
removal.
If the ABS hydraulic unit - N55- is damaged, the ABS control unit - J104- must be fully replaced with the
♦
ABS hydraulic unit - N55- .
The ABS control unit - J104- can be separated from the ABS hydraulic unit - N55-
♦
⇒ "3.3 Disconnecting the control unit from the hydraulic unit", page 34
The hydraulic pump and the ABS hydraulic unit - N55- must not be separated from each other.
♦
1 - Brake line
❑ from master brake cylin‐
der (floating piston cir‐
cuit) to ABS hydraulic
unit
❑ Distinguishing feature:
∅ 6 mm and pipe screw
with long thread M12 x 1
❑ 14 Nm
2 - Brake line
❑ from master brake cylin‐
der (push rod piston cir‐
cuit) to ABS hydraulic
unit
❑ Distinguishing feature:
∅ 6 mm and pipe screw
with long thread M12 x 1
❑ 14 Nm
3 - Brake line
❑ to rear right brake cali‐
per
❑ Distinguishing feature:
∅ 5.25 mm and pipe
screw with long thread
M12 x 1
❑ 14 Nm
4 - Brake line
❑ to front left brake caliper
❑ Distinguishing feature:
∅ 5.25 mm and pipe
screw with long thread
M10 x 1
❑ 14 Nm
5 - Brake line
❑ to front right brake caliper
❑ Distinguishing feature: ∅ 5.25 mm and pipe screw with long thread M12 x 1
❑ 14 Nm
6 - Brake line
❑ to rear left brake caliper
❑ Distinguishing feature: ∅ 5.25 mm and pipe screw with long thread M10 x 1
❑ 14 Nm
18
Rep. gr.45 - Anti-lock brake system
.