Skoda Kodiaq 2017 Workshop Manual page 54

Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
– Press the piston into the brake caliper using the piston reset‐
ting jig - T10145- .
– Lightly grease guiding surface for brake pads on brake carrier
with grease from the repair kit.
Note
Do not interchange the inside and outside brake pads. Pay at‐
tention to identification.
– Insert brake pads -1- with retaining springs -2- into the recess‐
es in the brake carrier -3-.
Installation of the inner brake pads
– The recesses in the back plate -arrows- must point upwards.
NOTICE
If the internal brake linings are incorrectly installed, uneven
wear of the brake discs occurs.
– Carefully position the brake caliper on the brake carrier.
– Screw the brake caliper onto the brake carrier with new self-
locking screws, while counterholding the guide bolts.
50
Rep. gr.46 - Brakes - mechanism