Removing And Installing Bearing Bracket - Skoda Kodiaq 2017 Workshop Manual

9 - Bearing shell
10 - Support
❑ for ball head of pressure rod of brake servo unit
11 - Bushing
Note
Note installation position.
12 - Cap
4.2

Removing and installing bearing bracket

⇒ "4.2.1 Removing and installing bushing, left-hand drive vehi‐
cles", page 75
⇒ "4.2.2 Removing and installing bearing bracket, right-hand drive
vehicles", page 77
4.2.1 Removing and installing bushing, left-
hand drive vehicles
Removing
– Disconnect battery earth strap ⇒ Electrical system; Rep. gr.
27 ; Battery; Disconnecting and connecting battery .
– Remove knee airbag ⇒ Interior body work; Rep. gr. 69 ; Knee
airbags; removing and installing knee airbag with ignition
– Remove the left footwell vent ⇒ Heating system, air condi‐
tioning system; Rep. gr. 87 ; Air duct; Remove and install
driver side footwell vent .
– Remove impact absorber -1- ⇒ General body repairs, interior;
Rep. gr. 70 ; Dash panel cross member
Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
75
4. Brake pedal