Removing And Installing Flywheel; Removing And Installing Driven Plate - Skoda OCTAVIA Workshop Manual

13
------------ 13-16 ------------
Crank Assembly

Removing and installing flywheel

Special tools, testers and aids required
♦ Torque wrench
♦ Counterholder MP 1-223
K - Insert counterholder MP 1-223 into the hole
in the cylinder block and lock the flywheel.
Note:
Fitting position of counterholder:
A - for tightening
B - for slackening
- Release bolts for flywheel.
Note:
Replace flywheel bolts.
- Tighten the bolt to 60 Nm + torque a further
/ turn (90°).
1
4
Removing and installing drive plate
Special tools, testers and aids required
♦ Torque wrench
♦ Counterholder MP 1-221
♦ Depth gauge
Removing
K - Attach counterholder MP 1-221 with bolt
M8 x 45 to the drive plate. Insert two M10
nuts between the counterholder and the drive
plate.
Note:
Fitting position of counterholder:
A - for tightening
B - for slackening
- Release bolts for drive plate.
OCTAV1A
Edition 04.04
S00.5110.57.20