Skoda Kodiaq 2017 Workshop Manual page 85

– Unscrew bearing bolt against -direction of the arrow-.
The fuses -A- break off.
Continued for all vehicles
– Pull out bearing bolt.
– Remove brake pedal.
Installing
Note
Replace bearing bolt with screw for bearing bolt.
♦
Do not grease the bearing bolt. The bearing bolt must remain
♦
dry.
– Insert the brake pedal in the bearing bracket.
– Insert new bearing bolt.
– Tighten bushings
The safety tabs for the bearing bolt must click audibly into place.
– Fit a new retaining clip for the bearing bolt
⇒ "4.1 Assembly overview - brake pedal", page 71
– Installing bracket
⇒ "4.2 Removing and installing bearing bracket", page 75
Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
.
.
81
4. Brake pedal