Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
– Mount plug connection -1- for brake pad wear indicator.
– Screw the brake line onto the brake caliper.
– Remove brake pedal load , e.g. -V.A.G 1869/2- .
– Bleed brake system
⇒ "6.3 Bleeding hydraulic system following standard proce‐
dure", page 125
.
– Attach the wheel.
Note
Observe the instructions for changing the pad
♦
⇒ "1.2.1 Changing the brake pads of the front brake - Mounting
instructions", page 47
Firmly depress brake pedal several times with vehicle station‐
♦
ary so that the brake pads are properly seated in their normal
operating position.
Check brake fluid level.
♦
Tightening torques - summaries of components
Note
Replace bolts / nuts that are tightened at an angle of rotation, as
well as replacement components after removal.
♦
⇒ "1.1 Assembly overview - front brakes", page 45
♦ Wheel bolts ⇒ Running gear, axles, steering; Rep. gr. 44 ;
Wheels, tyres; Specified torque for wheel bolts .
1.4
Removing and installing brake discs,
front brake
Removing
– Remove wheel.
– Remove the brake pads
⇒ "1.2 Removing and installing brake pads, front brake", page
47
.
– Remove screws for brake carrier
(
⇒ "1.1 Assembly overview - front brakes", page 45
and brakes.
54
Rep. gr.46 - Brakes - mechanism
.
pos. -9-)