Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
4.4
Clipping the brake pedal onto the brake
servo unit
– Hold ball head of push rod in front of mount and push brake
pedal in direction of brake servo, so that the ball head clicks
into place.
– Check that it is correctly locked in place by briefly pulling on
the brake pedal.
4.5
Removing and installing brake pedal
It is not possible to remove the brake pedal in the vehicle.
Removing
– Removing bracket
⇒ "4.2 Removing and installing bearing bracket", page 75
Left-hand drive
– Unscrew bearing bolt in -direction of the arrow-.
The fuses -B- break off.
Right-hand drive
80
Rep. gr.46 - Brakes - mechanism
.