Skoda Kodiaq 2017 Workshop Manual page 24

Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
♦ Repair kit - 1H0 698 311 A-
Removing
Fitting location:
The ABS control unit - J104- is bolted to the ABS hydraulic unit -
N55- and is located in the engine compartment on the right side.
Note
Do not bend the brake lines in the area of the hydraulic unit.
– Read out and note the actual control unit coding.
– Disconnect battery earth strap ⇒ Electrical system; Rep. gr.
27 ; Battery; Disconnecting and connecting battery .
– Remove engine trim panel where present ⇒ Rep. gr. 10 ;
Engine trim panel; removing and installing engine trim panel .
– Remove protective cover -1-, if present.
– Unlock the fuse plug -1- in direction of arrow -A- and pull it off
the ABS control unit - J104- in direction of arrow -B-.
20
Rep. gr.45 - Anti-lock brake system