Handbrake; Assembly Overview - Parking Brake - Skoda Kodiaq 2017 Workshop Manual

Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
3

Handbrake

⇒ "3.1 Assembly overview - parking brake", page 68
⇒ "3.2 Removing and installing control unit for electronic hand‐
brake J540 ", page 69
⇒ "3.3 Removing and installing handbrake motor V282 / V283 ",
page 69
3.1

Assembly overview - parking brake

Note
Replace bolts / nuts that are tightened at an angle of rotation, as well as replacement components after removal.
1 - Switch module 1 in centre
console - EX23-
❑ Summary of compo‐
nents: on the centre
console
❑ includes depending on
the vehicle equipment:
♦ Button for AUTO HOLD -
E540-
♦ Control light for AUTO
HOLD - K237-
♦ Indicator light for electro-
mechanical parking brake -
K213-
♦ Button for electro-mechan‐
ical parking brake - E538-
♦ Button for stability control
ESC / traction control ASR
♦ Button for OFF ROAD
mode
❑ Removing and installing
⇒ Electrical system;
Rep. gr. 96 ; Controls;
Removing and installing
buttons for electro-me‐
chanical handbrake -
E538- / Buttons for AU‐
TO HOLD - E540-
2 - Dash panel insert
❑ with fault lamp for elec‐
tronic parking/hand‐
brake - K214-
❑ with brake system warn‐
ing light - K118-
❑ with acoustic signal
3 - Control unit for electronic handbrake - J540-
❑ integrated into the ABS control unit - J104- and cannot be replaced separately
❑ Removing and installing ABS control unit - J104-
⇒ "3.2 Removing and installing ABS control unit J104 / ABS hydraulic unit N55 ", page 19
❑ Separate the ABS control unit - J104- from the ABS hydraulic unit - N55-
⇒ "3.3 Disconnecting the control unit from the hydraulic unit", page 34
68
Rep. gr.46 - Brakes - mechanism