Removing And Installing Brake Disc - Skoda Kodiaq 2017 Workshop Manual

Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
Note
Check brake fluid level, if necessary top up with brake fluid.
Tightening torques - summaries of components
Note
Replace bolts / nuts that are tightened at an angle of rotation, as
well as replacement components after removal.
♦ ⇒ "2.1 Assembly overview - rear brakes", page 56
♦ ⇒ "2.1 Summary of components - rear brake caliper",
page 85
♦ Wheel bolts ⇒ Running gear, axles, steering; Rep. gr. 44 ;
Wheels, tyres; Specified torque for wheel bolts .
2.4

Removing and installing brake disc

Removing
– Remove the brake pads
⇒ "2.2 Removing and installing brake pads", page 58
– Remove screws -arrows- and remove brake carrier -1-.
– Unscrew screw -arrow-.
– Remove brake disc -1-.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– Clean the surfaces for the brake disc and wheel hub.
Tightening torques - summaries of components
Note
Replace bolts / nuts that are tightened at an angle of rotation, as
well as replacement components after removal.
♦ ⇒ "2.1 Assembly overview - rear brakes", page 56
♦ Wheel bolts ⇒ Running gear, axles, steering; Rep. gr. 44 ;
Wheels, tyres; Specified torque for wheel bolts .
66
Rep. gr.46 - Brakes - mechanism
.