Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
– Detach the return hose -B- of the clutch master cylinder from
the brake fluid reservoir and attach it slightly higher.
Continued for all vehicles
– If present, disconnect the plug -1- from the brake light switch,
- F- the plug -2- from the vacuum sensor - G608- and the plug
-3- from the brake fluid level warning contact - F34- .
– Remove wiring harness from brake master cylinder.
– Remove screw -1-.
– Pull the brake fluid reservoir -2- out of the plugs.
104
Rep. gr.47 - Brakes - hydraulics