Skoda Kodiaq 2017 Workshop Manual page 88

Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
– Position the protective cap with the outer sealing lip on the
piston.
– Insert inner sealing lip of the protective cap with disassembly
wedge - 3409- in the groove of the cylinder.
To do so hold the piston with the hand.
– Press the piston into the brake caliper using the piston reset‐
ting jig - T10145- .
Note
The outer sealing lip of the protective cap will clip into the piston
groove.
– Install brake caliper
⇒ "1.3 Removing and installing brake caliper, front brake",
page 51 .
Pre-bleeding the brake caliper
Set up brake caliper for pre-bleeding as shown in the fig.
– Open vent valve arrow -A-.
– Using a commercially available bleeder bottle, pour in brake
fluid until bubble-free brake fluid drips out of the threaded bore
(brake hose connection) arrow -B-.
– Close vent valve.
84
Rep. gr.47 - Brakes - hydraulics