Summary Of Components - Brake Servo Unit/Master Brake - Skoda Kodiaq 2017 Workshop Manual

– Mark brake lines -1-.
– Unscrew the brake lines -1- at the master brake cylinder, close
the brake lines with the screw plugs from the repair kit - 1H0
698 311 A- .
– Unscrew nuts -2- from brake master cylinder.
– If present, remove the protection plate.
– Carefully remove brake master cylinder from brake servo.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– When installing the master brake cylinder with the brake servo
unit pay attention to the correct positioning of the pressure rod
in the master brake cylinder.
– Fill up with new brake fluid.
– Bleed brake system
⇒ "6.3 Bleeding hydraulic system following standard proce‐
dure", page 125 .
Vehicles fitted with a manual gearbox
– Bleed the clutch ⇒ Rep. gr. 30 ; Clutch mechanism; Bleed the
clutch mechanism .
Tightening torques - summaries of components
Note
Replace bolts / nuts that are tightened at an angle of rotation, as
well as replacement components after removal.
♦ ⇒ "3.1.1 Summary of components - brake servo unit/master
brake cylinder, left-hand drive vehicles", page 88
♦ ⇒ "3.1.1 Exploded view – control unit and hydraulic unit, left-
hand drive vehicle", page 15
♦ Battery, battery tray ⇒ Electrical system; Rep. gr. 27 ; Battery;
Summary of components - battery
♦ Air filter (petrol engines) ⇒ Rep. gr. 24 ; Air filter; Summary
of components - air filter housing
♦ Air filter (diesel engines) ⇒ Rep. gr. 23 ; Air filter; Summary
of components - air filter housing
♦ Engine trim panel, if present ⇒ Rep. gr. 10 ; Engine trim panel;
removing and installing engine trim panel .
3.4.2 Removing and installing main brake cyl‐
inder, left-hand drive with diesel engine
(Bi-Turbo)
Special tools and workshop equipment required
♦ Brake filling and bleeding device , e. g. -VAS 5234-
♦ Extraction bottle (commercially available)
♦ Repair kit - 1H0 698 311 A-
Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
3. Brake servo unit and master brake cylinder
105