Brake Pedal; Assembly Overview - Brake Pedal - Skoda Kodiaq 2017 Workshop Manual

4

Brake pedal

⇒ "4.1 Assembly overview - brake pedal", page 71
⇒ "4.2 Removing and installing bearing bracket", page 75
⇒ "4.3 Separating brake pedal from brake servo", page 79
⇒ "4.4 Clipping the brake pedal onto the brake servo unit",
page 80
⇒ "4.5 Removing and installing brake pedal", page 80
4.1

Assembly overview - brake pedal

⇒ "4.1.1 Summary of components - brake pedal, left-hand drive",
page 71
⇒ "4.1.2 Summary of components - brake pedal, right-hand drive",
page 73
4.1.1 Summary of components - brake pedal, left-hand drive
WARNING
The brake pedal travel must not be restricted by additional floor
coverings.
Note
Replace bolts / nuts that are tightened at an angle of rotation, as well as replacement components after
♦
removal.
Grease all bearing surfaces with polycarbamide grease - G 052 142 A2- before assembly.
♦
Do not grease the bearing bolt. The bearing bolt must remain dry.
♦
The brake light switch - F- and brake pedal switch - F47- are located on the master brake cylinder.
♦
Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
71
4. Brake pedal