Skoda Kodiaq 2017 Workshop Manual page 82

Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
– Disconnect plug -2- from the control unit for variable front light‐
ing.
– Disconnect wiring loom -2- from bearing bracket -1-.
– Separating the brake pedal from the brake servo unit
⇒ "4.3 Separating brake pedal from brake servo", page 79
– Secure brake servo -1- to prevent it from falling out.
– Release fixing nuts -arrows-.
– Remove bracket.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– Clip the brake pedal onto the brake servo
⇒ "4.4 Clipping the brake pedal onto the brake servo unit",
page 80 .
78
Rep. gr.46 - Brakes - mechanism
.