Connectivity › › Braking and parking Online services ŠKODA Connect › › Park Assist systems Warning lights overview › Driver assist systems This brochure is also available to download in each language version on the website http://go.skoda.eu/owners-manuals, see QR code.
Unlocking and opening › › Luggage compartment lid Locking the vehicle Unlocking the boot Unlocking the vehicle Vehicles fitted with manual lid operation › To open press the button and lift the flap. › › To close, grab the mount and pull in the direction of the arrow.
Correct and safe seating position › › Operating boot lid without contact Correct seating position for the driver Open/close › Speedily swing a foot under the rear bumper. Operating conditions The ignition is switched off. You must have the car keys with you. ...
Page 5
› › Adjusting front seats manually Adjusting the steering wheel position Adjusting a seat in a for- ward/back direction Adjusting height of seat Adjusting the angle of the seat backrest Adjusting lumbar support › Adjusting front seats electrically Adjusting lumbar support Seat adjustment Steering wheel locked ...
Operating rear seats › › Adjusting exterior mirrors Operating second row of seats › To adjust forward/back position, pull lever in the direction of ar- and move the seat to the desired position in the direction of arrow The knob can be moved into the following positions. Adjust the left mirror ...
Page 7
› › Folding seat backs of the third row of seats Folding third-row seats up/down up/down Before moving the seats, unlock the buckle tongues of the seat belts (the straps must be completely retracted). Before moving the seat backs, move the second row of seats forward ›...
Lights and visibility › › Operating light function Main beam Switch on main beam (spring-tensioned position) Switch off main beam / switch on headlight flasher (spring-ten- sioned position) Using headlights - turn switch Switch off lights (except daytime running lights) ...
Air conditioning system › Climatronic Air flow to the upper body Air flow in the footwell Recirculated air mode Ventilation/defrosting of the windscreen Heated rear window Heated windscreen Adjust Climatronic in the infotainment Synchronise the temperature inside the entire vehicle according ...
› › Climatronic - operation of the rear bench seat Manual air conditioning Individual functions can be set off or switched on by pressing the ap- Individual functions can be set off or switched on by turning the con- propriate button. When the function is switched on, the warning light trol dial or press the corresponding key.
Instrument cluster › › Buttons/dials on the multifunction steering wheel Buttons on the operating lever Operating the multifunction display Operating the multifunction display Turn - select data / set values Press (up or down) - select data / set values Press - display / confirm data Press - display / confirm data Operating the MAXI DOT display...
› › Setting the time Showing the next service appointment › › Switch on the ignition. Switch on the ignition. › › Press and hold the button Press and hold the button until the Time menu item is until the Service menu item is shown in the display.
Starting and stopping the engine › › Starter button Switching on the ignition Switching on the ignition › › Turn key to position Press the button briefly. Starting the engine - automatic transmission Starting the engine - automatic transmission ›...
Page 15
› START-STOP system The basic idea of the START-STOP system is to always turn the engine Other conditions cannot be influenced or detected, these are subject off when it does not need to be running. This feature is particularly ad- to the state of various vehicle systems and weather conditions.
Braking and parking › › Electric parking brake Auto Hold function Switching on The Auto Hold function stops the vehicle rolling away during start-up. › Pull the button. Holding of the vehicle is displayed by the warning light lighting up in ...
Park Assist systems › › Parking aid Area View When manoeuvring, the system draws attention to obstacles in the vi- When manoeuvring, the area around the vehicle captured by cameras cinity of the vehicle via audible signals and coloured labels in the info- is displayed by the system in the infotainment screen.
› Park Assist Park Assist helps drivers park in suitable parallel or transverse parking A display example of the indications for parallel parking (indications for places or manoeuvre out of parallel parking spaces. transverse parking are displayed in the same way). The system takes over the steering movements only when entering or Parking space detected with the indication to drive on ...
Driver assist systems › › Rear Traffic Alert Selection of driving mode When reversing out of a transverse parking space, the Rear Traffic By selecting the driving mode, the driving behaviour can be adapted to Alert (hereinafter referred to as system) warns of any vehicles ap- the desired mode of operation.
Page 20
› › Wizard for “blind spot” monitoring - operation Wizard for “blind spot” monitoring - driving conditions and warnings At a speed of more than 15 km/h, the area alongside and behind the vehicle is monitored by the system. At the same time, the distance and the difference in speed between your vehicle and other vehicles in the monitored area are measured.
› › Cruise control system Adaptive Cruise Control (ACC) The cruise control system maintains a set speed without you having to press the accelerator pedal. During control, the warning light lights up in the instrument cluster. Activate CCS (control deactivated) ...
› › Front Assist Lane Assist The Front Assist system indicates a warning in the display of the in- The Lane Assist system helps to keep the vehicle in lane. strument cluster of a collision risk with a vehicle or with another ob- The system detects the boundary lines of the lane using a sensor.
OFF ROAD mode › › Operation Hill descent assistant Part of the OFF ROAD mode is the hill descent assistant (hereinafter referred to as assist system), which with its automatic braking action on all wheels ensures a constant speed is maintained on a steep slope when driving forwards and reversing.
Hitch and trailer › › Swinging out the tow bar Swinging in tow bar › Pull the locking tab in direction of arrow (the installation point of No trailer or other accessory is connected to the tow bar. A connector the locking tab may be different depending on equipment).
Page 25
› › Trailer manoeuvring assistant Trailer manoeuvring › The trailer manoeuvring assistant (hereinafter only system) helps the Stop the vehicle and engage reverse gear or move the selector lever driver when reversing with a trailer. into position R. › Release the steering wheel and press the button. When manoeuvring, the system only undertakes the steering move- ›...
At the petrol station › › ® Refuelling Add AdBlue › › Press the fuel flap and open it. Press the fuel flap and open it. › ® Loosen the filler cap for AdBlue › Remove the filler cap and place it on the top of the fuel filler flap. ›...
› › Opening the bonnet Engine compartment overview › Open the driver's door. Coolant expansion reservoir › Pull the release lever underneath the dash panel. Engine oil dipstick › Press the unlocking lever underneath the bonnet. Engine oil filler opening ›...
The phone is in the passenger compartment. The telephone is compatible with the infotainment. A list of supported phones can be found at http://go.skoda.eu/com- patibility, see QR code. › Press the button , then tap on the functional surface Search for PHONE phone - search for available phones starts.
Radio › › Phone main menu Saving favourite stations › Press the button. RADIO › Tap on the functional surface and selected the desired broadcast- ing area. Information and functional surfaces in the Phone main menu. Name of the telephone service provider Functional surfaces of preferred contacts Choice of storage group for the preferred contacts Display of paired phones...
Navigation › › Navigation main menu Enter new destination and start route guidance › › Press the button , the Navigation main menu is displayed. In the Navigation main menu, tap the functional surface . › Tap the function surface and select the type of destination entry. Functional surfaces in area Enter a new destination, close route guidance, display the route ...
Information about using the ŠKODA One App can be found on the website http://go.skoda.eu/skodaoneapp, see QR code. SmartLink+ allows you to display and operate certified applications of an external device connected by USB on the device screen.
ŠKODA Connect application are To initiate the information / breakdown call, press the respective available on the website http://go.skoda.eu/skoda-connect, see QR button / (the connection can be cancelled by again pressing the code.