Skoda Kodiaq 2017 Workshop Manual page 95

3.1.2 Summary of components - brake servo unit/master brake cylinder, right-
hand drive vehicles
Note
Replace bolts / nuts that are tightened at an angle of rotation, as well as replacement components after removal.
1 - Cover
2 - Brake fluid reservoir
3 - Brake servo
❑ Assignment ⇒ Electron‐
ic Catalogue of Original
Parts
❑ separate from brake
pedal
⇒ "4.3 Separating brake
pedal from brake servo",
page 79
❑ Removing and installing
⇒ "3.3 Removing and in‐
stalling brake servo",
page 95
❑ Inspect proper opera‐
tion
⇒ "3.5 Check the opera‐
tion of the brake servo
unit", page 111
❑ if there are faults re‐
place completely
4 - Gasket
5 - Vacuum line
❑ Assignment ⇒ Electron‐
ic Catalogue of Original
Parts
❑ Non-return valve (in
vacuum hose); Func‐
tional test
⇒ "4.2 Checking the
non-return valve",
page 113
❑ the vacuum sender -
G608- is installed in
some vehicles with petrol engines
6 - Gasket
❑ Replace after disassembly
7 - Nut
❑ self-locking
❑ Tightening torque
8 - Bearing bracket
9 - Gasket
❑ replace if damaged.
10 - Master brake cylinder
❑ cannot be repaired, replace completely in the event of faults
⇒ "4.3 Removing and installing vacuum sensor G608 ", page 113
⇒ "4.1.2 Summary of components - brake pedal, right-hand drive", page 73
Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
3. Brake servo unit and master brake cylinder
91